Windows 7 interrupted file copy/move a large... now the directory does not exist in new and old places... Help

Similar Questions

• I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.

  I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.  I don't know what to do.

  Download from Download Photoshop Elements | 14, 13, 12, 11, 10

  Install and enter your serial number.

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• There was an error importing the widget: [3003] file or directory does not exist.

  Hi allllllllllllllllllllll I want to help please?

  I have a lot of questions?

  1:

  There was an error importing the widget:

  [3003] file or directory does not exist.

  sound appear when aim import widget?

  

  2:

  Impossible to load the WSDL. If there are currently online, please verify the format of the WSDL and URI file (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl)

  sound appear when aim box in!

  

  3:

  Could not feed widget. Make sure that you are connected to the internet.

  Unknown error.

  Could not feed widget. Charging | View more information!

  Sorry to say, but the browser Widget support has been removed from Dreamweaver CC

• VMware Player tells me to 'host reserved RAM', but the option does not exist.  Is there a command for vmx to this file?

  I am running VMware Player on a host Ubuntu 14.04, Win 7 pro x 64 comments.  When I start the client OS VMWare gives me this warning

  

  So I want to allow the use of the "reserved host RAM" option instead of playing with the pagefile, but setting told me to doesn't seem to exist in VMware Player

  

  Is there something I can add to the VMX file to enable this option?

  Porto Richardson wrote: this setting for VMware Player is found in the file config.ini to the player %allusersprofile%/VMware/VMware

  The OP said "I'm under VMware Player on a Ubuntu 14.04 host" so the file name and path you mentioned is not applicable.

  @LukeJS host on a Ubuntu (Linux) from the file name won't get the .ini extension and will be simply called the config and will be parked at/etc/vmware /.  So with the machine virtual shutdown is not suspended and VMware Player closed then a Terminal used the following command.

  sudo nano/etc/vmware/config

  Then add the following line.

  prefvmx.minVmMemPct = "100".

  It is essentially the same parameter that gets the value of the UI of VMware Workstation preferences for submission in response to the message that despite the instructions contained in the message does not exist in the VMware Player preferences user interface.

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• Can Windows Media Player XP play MTS file type? I tried, but the video does not play smoothly. Is this fix really?

  I tried, but the video does not play smoothly.  Is this fix really?

  There is a possibility that Windows Media Player could
  read the file if you rename the MTS to MPG or AVI.

  And/or...the suite of freeware Media Player can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (The name of the file to download is: "MPC - HomeCinema.1.5.2.3456.x 86 .exe ')

  If this fails, it may be worth trying to convert the MTS file
  WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converters are a few examples:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  (2) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Windows 8 Pro activation error code: 0x8007232B Error Description: DNS name does not exist

  I recently bought Windows via Tech Soup to work on my Mac.  I bought Parallels to run on the Mac.  I went through the process of full download for windows, but now I get an error 0x8007232B DNS name does not exist.  How can I fix it?  I'm really not technical computer so a very basic explanation would be helpful.  I need to be able to activate windows so I can run some fundraising software.

  Thank you

  M

  Hello

  I would like you to contact the Microsoft Product Activation Center to activate the Windows 8.

  How to contact a Microsoft Product Activation Center by phone

  Keep us informed on the status of the issue.

• Tried to turn off my computer and it froze. Now, the desktop does not load and I get a message saying that Windows Explorer is not responding

  Original title: virus Possible?

  I am running Windows Vista Home Premium on a Toshiba laptop. The last time I tried to stop it, it froze (got as far as the last screen showing 'close', then didn't). The next time I turned it on the desktop would not load completely (white screen, no desktop icons, accesses start bar) and if I click on the desktop I get a message saying "Windows Explorer is unresponsive. I tried to scan antivirus, but that also froze. I ran Microsoft defender several times, and it always freezes on C:\windows\system32\cmd.exe. While I can access internet Explorer, I can't click on the links that would open a new page (gel once more). Finally I can't yet do a reboot or a full stop. If it's a virus, how can I solve the problem when no anti-virus software is running?

  Any help would be greatly appreciated! I just moved across the world and have little knowledge of computers (but I'm much less following the instructions!). The last thing I need is for my laptop to be drunk so I can't communicate with the House...

  Hello

  Since you have had that protection antivirus in the next message will be methods to
  carefully check for malware.

  TrendMicro must be uninstalled and replaced<- this="" is="" a="" must="" do!="" if="" you="" have="">
  problems to check with TrendMicro.

  Instructions/TrendMicro removal tool
  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  ------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Avast - home - free - 7.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  =======================================

  Do not type the sfcdetails command, copy and paste.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  =================================================================

  Did you do checks memory and updated the BIOS, chipset of low level drivers and major
  embedded and separate device drivers?

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Delete system 32 files, now the computer does not work.

  Hi all, I received a virus there is a day of a program called Internet Security 2010 for me (I think it's an advanced antivirus remover or something a long these lines..)

  In the case, I did a scan of the system with AVG and BitDefender, nor presented with something else that the virus still persists. I took to google and then made to spybot, once you have downloaded and installed, spybot was the source of my problems and showed that helper32.dll and smss.exe in my System32 folder where the two infected. Knowing this, I deleted both of these files, but some issues (such as Mozilla blockin automatically to sites like facebook)... I advanced and downloaded malwarebytes. ... I run another scan encounted three more errors, helper.dll has been infected, still, so I tried to delete it once more, but I need permission to do so.

  In a stupid gesture, I moved into my office, almost desperately tryin to get rid of, renames, tried to remove it, permission, so now there remained
  I've renamed helper32.dll and put back into System32 filefolder. I also downloaded Microsoft Security Essentials.

  In the case, something, I think in my registry, or maybe in my services I messed up, because whenever I connect to my computer, I get a popup of the saying of the toolbar "Windows could not run services" and something to reject llimited to users to access certain things. " In addition, my internet does not connect and says "service incorporate or group does not" or something of the sort.

  I have remove the somethingI wasn't supposed to? How can I change? In addition, the system restore will not work and keeps telling me an unknown error occurred and tells me to pick another point to restore, but says that with every point, I try to restore, as well, I have no backup of windows.

  For the record, I am running Vista 32-bit Home.

  Can someone help me?

  Hi Anarchoi,

  You are able to get to a command prompt?  If so, run SFC/scannow to replace missing or damaged files.  Let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• File.openWithDefaultApplication () to open the directory does not release

  Hello

  I am trying to use the File.openWithDefaultApplication () method to open a directory location.  I'm running on Windows 7 Professional 64 - bit, but also tested on Windows XP Professional 32-bit with the same result.

  The method works fine if I run the app in Flash Builder 4 (run or debug), but when I try a Release version, it does not work.  I exported the Release as native Installer version, and I have updated the tag < supportedProfiles > in XML to the application to support only "extendedDesktop".  That has not changed behavior, however.

  Here's an example of how I call the method:

  var thedir:File = File.applicationStorageDirectory;
  thedir = thedir.resolvePath ("the_directory");
  If (! thedir.exists)
  {
  thedir.createDirectory ();
  }
  thedir.openWithDefaultApplication ();
  

  Any idea what's going on?

  Either way, if I try to open individual files in the Release version, it works fine.  So far only open directory is a problem.  And I checked the directory exist before trying to open it.

  Thanks for any idea that you can offer...

  Best,

  Chris

  Hi Chris,

  Instead of using openWithDefaultApplication(), try to use the native process and called 'Explorer' on windows and 'open' on the mac, then pass the path of the file as an argument.  Something like this example from windows:

  private function openWindowsFolder():void
  {
       var explorer:File = new File("C:\\Windows\\explorer.exe");
  
       if (explorer.exists)
       {
            var nativeProcessStartupInfo:NativeProcessStartupInfo = new NativeProcessStartupInfo();
            nativeProcessStartupInfo.executable = explorer;
  
            var args:Vector. = new Vector.();
            args.push("C:\\Windows");
            nativeProcessStartupInfo.arguments = args;
            process = new NativeProcess();
            process.start(nativeProcessStartupInfo);
       }
  }
  

  Hope this helps,

  Chris

• Write the worksheet to a file even if the path does not exist (yet)

  I am interested in the use of spreadsheet write to a file to save data on my drive.  What is the best way to include this VI and tell him to create the folders if they do not already exist.

  For example:

  

  Using this example, if no 'Data' folder located on my desktop, how can I LabVIEW create the folders 'Data' and 'Test1' needed to create a Test1.csv to the specified location?

  I ended up doing a VI of this example https://decibel.ni.com/content/docs/DOC-23385 community

  

• Hello, my daughter has closed a Trojan warning box and now the pc does not receive the windows software

  It stops at the black screen and the cursor in the upper left corner is what is a destructive hard drive format please because she'll lose everything on the pc, it has a hp pc and if there is a way to get off his stuff before the format, I would like to know please

  Hello

  Step 1: Disconnect any external devices (except keyboard and mouse) connected to the computer and check if you are able to boot.

  Step 2: Check if you are able to boot in safe mode. If you are able to boot into safe mode with success and then try to perform the clean boot to safe mode.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. click Startand then click run.

  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.