No video output

Similar Questions

• Satellite P100-102 without digital-video output TFT-connection-Port?

  Hello

  We do not understand why mobile phones latest, as the Satellite P100-102 would be produced without digital-port connect TFT´s...

  On the market-enduser TFTs are popular, but it is not possible to use the digital interface with the portable toshiba. We are not interested in the purchase of laptops from other manufacturers, but our time flee.

  Can you give us a tip, then of the next generation Satellites with digital output to connect TFTs will reach the market?

  Best regards
  Sascha

  Hello

  Sorry, but I disagree with you.
  Toshiba designs laptops that support the digital port (D-video output port)
  Check for example the Qosmio of E, F, G series.

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Tecra 8000 composite video output

  I'm running the video output from my tecra 8000 via yellow composite video connector at the rear of the unit. I thought it was as simple as pluging in both sides of a RCA (one end to the video input of a video recorder) Jack and the other end into the video Tecra.
  I get NOTHING on the screen. What I am doing wrong?

  Thanks in advance

  Hello

  normally, you have to pass the video signal in the composite connection.
  For this (on newer models at least) by pressing FN + F5.
  This combination toggles the 'next' display/device combination
  If the videodevice primary and standard is the internal TFT, pressing FN + F5 once going to signal internal both TFT and RGB (monitor connector). Next time you press it, it will only in RGB, and next time, again, it should go to the TV output (composite).

  Try it!

  BR
  Tom

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Satellite 1800-100: video output does not work

  Jen
  I just installed windows XP on my old Satellite 1800-100, but now my video output no longer works. So I just downloaded the latest version of the driver, but there is no way I can get it installed. According to Windows the new driver is more recent, so it won't let me update. And when I try to uninstall the display driver, I have to restart for the taking of effect and wile it restart automatically installs the standard driver again.

  Can someone help me?
  Welcome,
  Daan

  Hello

  You say TV out port, or monitor the port? As far as I know, this unit is pre-installed with Windows XP Home edition at home and all the drivers can also be used for WXP Pro.

  You preinstall your own OS (no recovery image)?

• Satellite 1135-S1553 without S-Video output Port - how to connect a TV

  I have a portable Satellite 1135-S1553, how to connect it to the TV without having the S-video output Port in my laptop?

  Are you sure that your computer laptop doesn t support port s-video OUTPUT to 100%?
  According to [this page | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_tourView.jsp?moid=434998&rpn=PS113U&ct=PT&so id = 660059] portable Saturday 1153-S1553 supports this port at the rear.

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• Video output port does not work on Tecra 8000

  My Toshiba Tecra 8000 screen has cracked and I realized this was a video output port, but it does not work.

  Can someone help me?

  Hello

  What video output port can you hear? The VGA port or the output port RCA-video? In both cases, the external display you seek, should give a picture.
  If this isn't the case, it should at least be configurable in windows.

  Please specify your question and tell more details on exactly what you want.

  Welcome them

• Qosmio F10 - 136 and D-video output

  I have a Qosmio F10-136, I want to use the D-video output with cable SCART. I ve tried to change BIOS, VIEW the section, but through the various options it s PAL (SCART) NOT. Only PAL (S-Video), 525 p. 750, 1125i, 525i NTSC (US), NTSC (Japan).
  My BIOS version is 1.20, I've followed the instructions of the FAQ5300XK0012R01 and TSB4A00TK000MR0.

  Hello

  Is your unit pre-installed with original recovery media and if the display driver is original Toshiba designed one?

• Can I connect a CCTV to the s-video output?

  I have a sp20 with s-video and need some images of my microscope at Uni, but when I plug in any device is detected, do I need an external card or can I set up a card for the slots? Or the graphics card from the computer should read the s-video cable (the cctv said Iris, on which I connect to my s-video output?
  My career would appreciate any help

  Hi Mark,

  Sorry if I misunderstood your request, but I think that the S-video port on your laptop is out only that you will be unable to get a signal to your laptop using the S-video connection.

• Satellite A300 - possible port VGA - not problem of video output

  I use my VGA port in two main locations, at home to connect on an old television set via a PC/TV converter and work to connect directly to a projector.

  This week he suddenly stopped working on both at the same time. I tired to another laptop in the projector to work and it works great. I also tried different tracks. The problem is certainly my laptop (which is now almost 4 years).

  The most likely thing seems to be what is ' t the plug itself. If I plug something inside Windows (7 Ultimate) is work that is an additional monitor, but the projector/TV no signal. I've tried all the obvious things, hit F5 makes no difference, and the Windows settings have not changed. The resolution and refresh rates are properly defined. I try to avoid the standard answers on the verification of all the things that I already checked!

  Now I have a HDMI port on the side, the probability is that just buying a VGA/HDMI adapter and using this port will solve the problem? I guess if it's just a physical problem with the VGA port so it will, but the problem would be a graph problem or your motherboard, and if it is will this affect the HDMI port, but also the VGA port?

  Port VGA is an analog video output. HDMI is a digital output.
  Two are different and not related them to each other.

  So I don't very well if a HDMI adapter-> / m VGA would work properly.
  Maybe it works but only with a lower resolution. So in my opinion, FullHD is not possible. However, I think that you will need to test it with your laptop.

  Usually, you can use an adapter like HDMI to DVI or DVI to HDMI smoothly.

  With regard to the question of VGA output.

  Well, usually the Fn + F5 should pass between the internal and external production. It should work with VGA and HDMI port. Maybe it's just a software related issue.
  In your case, I will try to uninstall and update the display driver. Maybe it helps.

• Satellite P300D - no image through S-video output

  Hello!

  I can't image through my S-video output to the TV. VGA and HDMI works fine, but my TV is old and I don't have that kind of input to TV.
  The laptop recognizes TV on cable, but I can't go from a primary and secondary display.

  (satellite P300D - 12L)

  Hi bgjerg,

  Usually you can pass to your TV by using the FN + F5 key combination.
  More if you use the S-video output, you can set parameters in the display driver. There, you can choose between NTSC and PAL. It s on your TV depending on what setting you need.

  Check this box!

• Satellite L750D - no video output HDMI on TV external

  I have a L750D Satellite and a SyncMaster Smart TV

  I want to connect my laptop to the TV with an HDMI cable.

  When connected, my laptop detects the TV and it can create an extended desktop, but the TV says no signal.

  I tested the TV with another laptop and it works fine.

  I deleted the display driver and was able to get some videos on television but the color was bad and the option of extending has been disabled. In addition to this, I was unable to change my screen resolution.

  I installed the latest drivers provided by Toshiba which is dated 05/09/2011. Same problem, no signal.

  Any suggestions on a fix?
  There latest video drivers that I can download?
  AMD offers I go here for the drivers.

  Any help is appreciated.

  Hello

  I assume that you have installed Win 7. Right?

  > I installed the latest drivers provided by Toshiba which is dated 05/09/2011
  There is a new display driver released on 13/04/12 [AMD display driver v8.911.6 Windows 7 - 64 bit: http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 6463 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 81347 & OSI D = 30 & driverLanguage = 42]

  Install this one.

  In addition, you need to install other tools such as Toshiba Value added Package, AMD display tool, ATI Driver Sound as well as driver Conexant audio and other.
  Then you should be able to use the FN + F5 to switch to the external video output

• Video output Qosimio G20 S problem - NTSC TV

  Hi all

  I have a Qosmio G20-110, bought in the United Kingdom and problems of video output via the S-video cable to a flat TV in US I have the image but it rolls down very quickly. When he does that, I played video clips AVI on windows media player. I followed the Nvidia Setup program to get the result on portable computer LCD screen and tv screen synchronized, and that's ok, except for the picture of rolling. I don't know if there is a problem with the NTSC output - is this still a problem when watching digital videos on your laptop? - or if it's a different kind of problem. Any advice much appreciated.

  BTW, I read elsewhere on the forum that the media center TV works in the country of purchase - not the case with my laptop, I've watched television successfully both in the United Kingdom (PAL system) and the United States (NTSC system).

  Is it possible to check or change the type of output via s video cable?

  Hello

  I have no experience with a standard NTSC TV but AFAIK the PAL signal supports 50 Hz and supports the NTSC 60 Hz signal.
  Maybe it has something to do with your problem.

  You will find the detailed description:
  http://en.Wikipedia.org/wiki/NTSC

  However, in your case I would recommend BISO settings.
  In many of the BIOS version, you can pass the video parameters between NTCS and PAL.

  PS: I recommend you to test the video output also on different TV s to make sure this isn't a TV related issue.

  Good luck