Windows 7 locks after every 20-35 minutes

Similar Questions

• Error on Windows Vista blue screen about crash of hard disk after every 10-15 minutes.

  My system crashes after every 15 minutes showing this blue screen error. Since a few days before this error, hard drive, reading ability has been slowed a lot. When opening a disk or a file, it takes a lot of time compared to the normal fulfilment. After this blue screen, my system goes for a restart, then another error appears as hard drive not found. I use dell Studio and ran the diagnostic system and it too hard disk error found. Is it possible to solve this problem in my old hard drive with new replacement?

  Vista/xp have already installed software to transfer the BONES of one HD to another, if youre pc is

  a desktop computer, it's fairly easy. Or, install a new HD to the pc boot, enter the BIOS, install the vista installation cd,

  set pc to boot from the cd (1st boot priority) 2nd HD, save and exit. The installation menu to display, follow

  instructions, select 'format' of the HD and windows will automatically install.

  Or 2nd HD, installing under windows, go in run, type: diskmgmt.msc in msc, R.click on the new hard drive, create a

  partition, use the default settings in the wizard, once thru, re-click, select to format, once through exit msc.

  Back to run, type: XCOPY C:\*.* D:\/c/h/e/k/r are for everyone in the DOS window, once its through, the new

  HD has the old operating system installed. D: is the letter of new HD, if, in light of the others, then use instead... It works

  very well, but with a hard drive faulty, data could not get transferred, or it may be damaged...

• My laptop locked after I use it for several minutes.

  Hello world

  I have a really annoying problem.

  My laptop is locked after I use it for several minutes.

  When I say locked, I want to say it is the place where shows my account name and below it says locked.

  As a first step, I think it is caused by the automatic locking of cuz I'm really annoyed by this last, I uninstalled it.

  However it still does not.

  Could someone tell me what the problem is on the Earth?

  It's maybe just because I really don't know with my new laptop.

  It's a power setting that determines how long before its entry in the screen saver, sleep more, or even in hibernation mode. You can change the requirement for a password (somewhere in the Windows screen saver section) or the duration before entering these modes (you should be able to define with the Lenovo Power Center thing). Of course, making one is a security risk, but it is up to you as to how much safety or comfort desired.

• In Windows 7, crashes after being idle for a few minutes

  COMP. CAME WITH VISTA HOME PRO. HDD OUT CRAPPED.  REPLACE HARD DRIVE WITH PROGRAM T1 & ADV. WITH WINDOWS 7.  INSTALATION WENT WELL. BUT COMP. A LOCKED UP AFTER SITTING A FEW MINUTES PRESENCE REPAIRS.

  Please have a read of this page - resume idle freezes. May have tips on there for you.

  Above all, make sure you have the latest OS updates as there have been updates of stability.

• VPN users drops after every 5 minutes

  Hello world

  We have users whose remote VPN drops after every 5 minutes.

  I need to know what things can check to solve the problem?

  The user connects by RSA Token.

  ISP connection is ok is not question.

  Something I can verify in SAA?

  Thank you

  Mahesh

  Client side, have you tested wired vs wireless to see if the problem exists in both?  If it's the only one, but not the other, try to update the drivers.  Also, if it's windows 7, take a look at the power settings in the control panel.  I saw where the aggressive powers will be stop standby network port.  Not that big of a deal in a LAN environment but it wreaks havoc on the VPN.

• My windows 8 keeps sigining every time that I leave it unattended for even a few minutes :(

  My computer windows 8 guard signature every time I leave it unattended for a few minutes or even trying to watch a movie.

  Really irritating.

  Tried every thing... went to energy settings and made sure that all the timers are never or 0.

  Screen saver is turned off.

  Even a parameter called "console display lock off time out ' is set to 0.

  Please please help. Makes me crazy!

  Thank you all very much.

  FOUND THE ANSWER! WHOOPP WHOOP! IF HAPPY.

  Guys and girls if you ever find your self in the position above, or you try to change the screen saver timeout setting, but it does not change for anything other than 1 min his car...

  ONE OF COOPERATE YOU EMAILS / a PROGRAM like VPN IS SETTING RESTRICTIONS!

  In my case it was mail NHS. Delete the account, then go to

  Control Panel > user accounts > reset the credentials... TADA! Problem solved :)

  Windows 8 now officially problem free for me :)

• With Windows 7 online game lag s for 1 min every 15-20 minutes. Help, please!

  Just downloaded Battle of the Immortals free MMORPG and every 15-20 minutes I have a lag of 1 min where the game slows to an almost unplayable State. First I thought that maybe my internet has strangled so I called my ISP. They ran a few test and said that everything was running at 100%... So next time, I contact the support team technique video games... They had run me a dxdiag and a program to hack... I also ran a tracer on my connection just to show them this is not not my internet... Then, they responded and said "it could be Windows, Windows Firewall, Admin, UAC, network or anti-virus settings you need to change so that they are not blocking or limiting the game." I tried everything until I even contacted them... I watched my CPU usage and prosesses and nothing no longer uses the CPU than normal usage... I have no virus and I just bought this processor so there may not be a hardware malfunction about 2 months... More 5 other online games I play run very well... I also tried setting the game as high priority in windows Task Manager... That which seemed to work for about 6 hours but now my windows task manager keeps reseting back to normal priority. I downloaded a program called Prio which is suppose to set a permanent priority... Well, this program has not completely... I also tried to run the program with the resolution of the problems of compatibility and as an administrator... Without success... I have also all the drivers for all... I have triple checked the drivers... Help, please!

  MY CPU Specs:

  AMD Athlon (TM) II X 4 820 2.80

  RAM: 8,00

  64-bit operating system

  Graphics card: Nvidia Geforce 9100

  1 Terrabyte HARD drive

  Well I think I got myself the solution...  I discovered that the game made my jump 20 c cpu temp... So when my CPU hits 50 - 54 c temp the game hits a pic gal... Currently, I have on my open cpu and a fan blowing on the one side and I had 3 hours of spike no lag... It was difficult to find a limit temp CPU specific before you start to make mistakes, but what I found said it was about 50 to 60 c Temp...

• I had a password lock after a Windows automatic update 14/10/09.

  I restored the system to a point before the updates, and I managed to open a session, but the updates keep installation every time I stop and I have to keep restore to be able to connect. I changed the settings to do not automatically updates, but it keeps the installation anyway, and then it does not recognize my password until I have restore back again before the updates on 10/14. How can I hide the updates or otherwise prevent install?

  Hello

  Control Panel - updated Windows - right click on HIDE - you may have left superiors settings allows you to set
  it to download, but not install if you have a chance to HIDE. Once done, you can set it to auto.
  -------------------------------------------

  You should probably make these institutions.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• My computer is locked after 10 minutes instead of sleep when not in service

  Original title: locked computer

  My computer is locked after 10 minutes instead of sleep when not in service

  Hello

   

  
  Could you please clarify the question?
  1 - is your computer hangs / freeze when you wake the computer from sleep mode or when the computer begins to sleep?
  2 or it is locked and it will prompt you to enter the password?

  3. what type of screen you get when the computer crashes?

  4. have you installed the latest display drivers?

   

   

  Hope to hear back rom you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to stop Windows 7 locking/sleep/put into hibernation after a long period of time.

  Hello!

  I used clocks on my computer for some time now. Since installing Windows 7, they fail every day because Windows will start in an inactive state.
  I tried on my laptop power options, never placing dim/off/or sleep. I have also ensured that it was not updated Windows restart my computer while I was sleeping. There is no screen saver not enabled either.
  Thank you very much for the help.

  1 under the settings you mention, there is a button Advancedoptions.  A click on it.  You will see several sections.  Go to sleep & expand it.  Never Hibernate after value.

  2 you seem to have already checked the screen saver - Control Panel, Customize, Screensaver [in the lower right corner of the window] - this must be set to none

• My Windows 7 keeps freezing after 5 to 20 minutes.

  Hello

  I have a laptop Dell Inspiron 15R under Windows 7 Home Premium. The problem is that it freezes sometimes after about 5-20 minutes or more. I ran various tests with different anti-virus programs antivirus and always they detected nothing unexpected (Malware Bytes, Eset antivirus). I was wondering if someone could help me with this because today I had to reboot my computer more than 12 times. Also, when it is frozen I can't do anything at all except the press and hold the power button until the laptop turns off. It is a real pain so if I could get an answer as soon as POSSIBLE, that would be wonderful!

  Thank you

  Brandon

  Hi Brandon,.
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/
  It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• I tried to download an application on windows store, but after 2-3 minutes, it shows pending.

  I tried to download an application on windows store, but after 2-3 minutes, it shows pending. He tried all the methods, but it still not work. PLESE HELP ME SO HURRY!

  Original title: APPS PROBLEM

  Hi Rishabh,

  Method 1:

  Let's first try run the troubleshooter modern UI App and check if it helps.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:
  If the problem persists, I suggest you to temporarily disable the security software and check if it helps.

  Follow the steps to disable the security software:

  a. Locate the security software installed on your computer in the search option of Windows 8.

  b. click on the settings tab.

  c. uncheck the option to turn on the security of the software.

  d. click the save changes button.

  e. After you disable security software, check if it helps.

  Note:

  (1) once you have completed troubleshooting, ensure that you have enabled the option Turn on software security under the settings tab.

  (2) security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See the article for more information.

  What to do if you have problems with a soft:
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Vista Windows automatically locks

  Hello!

  A few days ago I left my laptop compaq so that Windows Vista Home Basic is open and maybe my baby cousins, touched, after returning a few minutes later, I found that Windows vista has been unable to work properly. Every time when I started the computer, after entering my password and log, Windows vista automatically locks the computer just in few seconds and asks me to connect it again. I type my password again, and then it opens and even once will lock automatically and asks me to log in again and again...

  I can't really understand what to do with it... I don't want to reinstall Windows vista, so it might be impossible for me... what I need to do? Hope to receive useful information for it...

  BTW, I did check the hard disk with BIOS, and it showed no errors on.

  Thanks in advance!

  Hello

  You can try this:

  do a safe mode system restore to before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Internet disconnects every 10-15 minutes

  I have a Qosmio G30-194 I bought in February 2008 Dubai Duty free. I have Windows XP on my laptop. I have a broadband Internet connection.

  Internet disconnects every 10-15 minutes on my Qosmio G30-194; After repair, I get the line once more, only to disconnect after 10-15 minutes.

  The system event log says "* EVENT_BROWSER_ELECTION_SENT_LANMAN_NT_STOPPE D * ' with the message" * the browser has forced an election on network %1 because a master browser was stopped *.»
  The explanation reads as follows: "* the network must be a master browser *.»

  What is worse, is there the user Action: ' * there is no user action required. "

  What am I supposed to do other than to take this action, that is, to find a solution to this problem?

  * PLEASE HELP! *

  Thanks and greetings
  Mahesh

  Have you tried to update the Wireless driver?

• Windows tries to update every ten miinutes or more

  Every time I stop, restart or hibernation, it installs and configures the updates. It shows the symbol for update on my menu closed almost constantly. If I restart and windows updates, ten minutes later he says it must be updated again. My update history shows many updates failed. What happens someone please help.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.