Windows 7 Media Center is unable to save

Similar Questions

• KWorld 399U tuner TV USB "unable to determine the configuration of the TV signal" Windows 7 Media Center (64-bit)

  I just upgraded my computer to Vista 64-bit for Windows 7 and am more able to use my USB from KWorld 399U tv tuner in Media Center.

  It worked fine on Vista, but after the upgrade, it asked me to set up my tv again signals. After that Media Center works "review of TV signals" for several minutes, it displays the message "Windows Media Center is unable to determine your TV signal configuration.

  I tried to download and install the latest drivers for Windows 7 http://uk.kworld-global.com/main/support_down.aspx?mnuid=1338&modid=22, but this does not make a difference.

  I drove my machine back to Windows Vista and the tuner works perfectly again, even after installing the latest drivers.

  Can anyone help?

  Thank you very much for your time.

  I had exactly this problem. My Setup has worked for weeks, then afer a RAM upgrade MC could get is more a signal of the usb U399. After a lot of noise, I uninstalled the driver from Device Manager, rebooted and windows prompted me to install a driver MSI... I tried this and it worked only!

  The KWorld Installer seems to be wrong.

  The location Windows driver is http://download1.msi.com/files/downloads/nb_drivers/tv/tv_mc810_9.603.1.0630_w700.zip

  Good luck.

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• backup windows 7 media center settings (including the list of strings)

  Hello

  Does anyone know how to save the settings of windows 7 media center (including the list of channels)?

  all this remains under a specific folder?

  TX

  Hello, baruchno

  There is no built-in support for media backup Center settings. You can leave comments asking this feature at the following link: http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  For reference, Media Center stores the settings to: C:\ProgramData\Microsoft\eHome

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Media Center - Code 3 error when you try to watch the tv/record tv ratings, etc.

  I have a windows xp media center and all of a sudden when I try to use the media center, I get an error 'code 3' I tried to do a few different dates on the system restore but it did not fix the problem. I also tried to find out which driver to restore or reinstall but I don't really know what driver to do. I know that is not under the modem or a printer, but after that, I'm lost. Any help that anyone can give me would be greatly appericiated. Thanks in advance. Trevor C.

  Hello

  1. What is the exact error message?
  2 have you made changes on the computer before this problem?

  The following article might be useful:
  You receive an error message "Failed to save component", an error message "Critical process failure" or a "Tuner not found" error message after you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/910905

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Setup live TV in Windows 7 Media Center hangs at «Downloading TV setup data»

  Original title: Windows 7 Media Center live TV Setup

  I have Windows 7 Home Premium on your desktop Gateway SX2840-01.  I have a HP usb TV tuner.  I'm unable to set up Media Center to receive television through the tuner.  Put in place hangs at the page «Downloading TV setup data»  It just stay there with no error message or another pop ups. The line of progression on the display benchmark does not advance.  If I run troubleshooting, this indicates a problem and "WITHOUT difficulty".  The same tuner hooked to another computer had no problem with installation and operation.  This computer has Win 7 and the same drivers downloaded from the Hauppauge web site that has the entry door.  Please give me some possible fixes to complete set upward on the bridge.  Thank you.

  I solved the problem listed in the original post on this thread by disabling Windows Media Center and by removing all the files and folders in the shadow of Microsft eHome folder, then by restarting the computer.  I then enabled Windows Media Center and again rebooted the computer.  Of detailed instructions for each of these steps is available in Googleing or Windows support.

• Windows 7 Media Center can't find my DLNA certified DMP (an LG BD390 Blu - ray player model network).

  I have a Player LG Blu - ray wireless connected to my home network.  Configuration of the network connection to the format Blu - ray says it is successful, and it is capable of downloading movies on the shared internet connection.  My management software from the network router (WRT610N model) Cisco Linksys® Network Magic Pro displays the Blu - ray player on its network card device.  LG Blu - ray player is a certified DLNA DMP (digital media player) device and the software supplied LG Nero MediaHome 4 (Server DLNA media graduate) successfully concludes the LG Blu - ray device when it starts.  So far, I've been unable to get the Windows 7 Media Center (supposed to be a media graduate DLNA server) to find my network Blu - ray player.  But the problem is more than just that the Media Center do not find my network device, even the 7 network and sharing Center window is not this network device when I select «View full map»  When I go to printers and devices on Windows 7 and select 'Add a device', it does not find my device of network Blu - ray player that passes by the Cisco Network Magic software and Nero MediaHome 4 software.  So what prevents the network of Microsoft Windows 7 software and Media Center software to my LG Blu - ray network player?

  Media Center Extender technology owns and uses any DLNA.
  I don't know why Umesh from Microsoft Support thought it was possible. You
  will not be able to set up your Blu Ray drive as an Extender. You CAN use
  Windows Media Player READ ON technology and streaming technology. You will not be
  be able to use your new drive LG Blu - ray network as an extension inside the
  Media Center interface.

  On Tuesday, 22 December 09 23:09:50 GMT, Gary Henn wrote:

  So why Microsoft Media Center processes to detect a 'Media Center
  Extender"requires the manual step of reading a 8 digit number displayed at the
  DMP device during the process of detection of a DMP device (this is the step that)
  fails with my Blu - ray player, it does not display a number of 8 digits on my HDTV
  connected to it)? The Nero MediaHome program does not require this manual step
  It performs detection automatically.

  Barb Bowman www.digitalmediaphile.com

• Windows XP Media Center 2005 cannot connect to the Internet

  Dear all,

  I'm having a problem with Windows XP Media Center 2005. The problem is that when I connect the cable from the modem to the laptop, I only send packets without receiving. The IP address I get is also 169.254.207.207, which is not a valid IP address to connect to the internet, and so I guess that something is blocking the laptop to get the IP address. Another thing I noticed is that when I turned off the modem and restart it, I have connectivity maybe 5 seconds and then return to no connectivity.

  You guys can tell me what is the problem, and if I have to download something but in addition to the internet so that I can get my laptop to work. That said, I can connect to wireless with no problems.

  Thanks for your help and your time

  Martyna

  Hello

  Sorry for the question but what modem did you mean?
  A simple analog modem or DSL (broadband) modem that supports support a LAN connection.
  If you mean the second then I would check the TCP/IP settings in the properties of LAN card. The settings should be set to automatic

  You should also check that you firewall settings.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Satellite A100: Need drivers for Windows XP Media Center Edition

  Hi there, hoping someone can help me, just bought Windows XP Media Center Edition, had home installed, installed a new and I'm missing some drivers (Ethernet controller, mass storage controller, network controller, PCI device and video controller VGA)

  I have a satellite A100 PSAA9E and I was wondering if there is no driver for this edition of windows yet or if there is no alternative that is pro XP drivers should work?

  Thank you
  Andy.

  Hello

  On this page of Toshiba, you will find drivers for different units.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Win MCE drivers are not available for Satellite A100, only Win XP.
  Jasmin said, you can try to use the Windows XP drivers as the Win MCE is a WinXP with additional features.
  Check it out

• Side effects of installing windows xp service pack 3 upgrade on windows xp media center edition version 2002 service pack 2

  Will there be side effects to install windows xp service pack 3 update on my windows xp media center edition version 2002 service pack 2?

  Done correctly, installation of SP3 will have as a side effect, a very beneficial: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  How TO get a computer running WinXP SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• Windows 7 media center tv guide planning lost .dll

  My anti-virus found a .dll suspect something like a regular planning. I deleted the .dll file and it seems that it was necessary for the update to Windows 7 media center tv guide (now displays the available data). I have reset media center several times with no luck. Unfortunately, I can't restore to an earlier date or obtain the file from my Recycle Bin. I still have Windows 7 64 bit upgrade disk if I can find the name of the file and know where to copy it in.

  Thanks for your help,

  jqh947

  Hi jqh947,

  1. you remember which dll file has been deleted?

  I would say Mr scanner SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows xp Media Center from windows xp media center for windows 7

  I have windows xp media center 11.  I need to have windows 7 to be able to configure the USB tv tuner to record/watch tv programs

  Hi Bevtravel,

  Windows Media Center on Windows XP, like Windows 7, can use external USB TV Tuner to watch/record TV. Make sure that external USB TV Tuner is compatible with the version of Windows Media Center that you have on your computer (2002, 2003, 2004, 2005, etc.).

  Access the link to learn more about recording TV in Media Center.

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/record-TV/default.aspx

  Besides the link above, you can also access the following link to see what all is possible in Windows XP Media Center against Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/products/compare?T1=tab20

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Zune on Windows XP Media Center Edition 2002 software

  Is there anyway to get the Zune software to work on Windows XP Media Center Edition 2002?

  Hi Balram,

  If you are looking for Windows XP Zune application, you need Windows XP SP3.

  You can download the software from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=27163

  If Windows XP SP3 is not installed, you can download it from this link

  http://support.Microsoft.com/kb/322389/en-us