Windows 7 not recognizing Adminstrator privleges.

Similar Questions

• My program iTunes windows is not recognizing my iPhone more than 6 s

  I have installed ios 10 but my iPhone 6 s more is stuck in recovery mode and my iTunes account is not recognizing the device to complete the update or restore.

  The first thing to do is to make sure you are using iTunes 12.5.1, like this version, released on September 13, 2016, are the first to recognize and prepare for iOS 10 version.

  Next:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• For the first time Windows is not recognizing my Nook. Any suggestions on how to fix this?

  I downloaded books from my computer on my corner several times via Adobe Digital.  Today, Windows is not recognize as my Nook is connected to the computer.  The cord shows power at the end of the meal.

  Hi Nancy,.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
  3 have you tried to connect the device on another computer?
   
  Method 1:
  Try to connect the device to a different USB port and check.
   
  Method 2:
  Run the fixit and follow the steps in the article:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  Method 3:
  Check if it is detected in Device Manager. Follow the steps below:
  a. click on start
  b. click on Run
  c. in the open run, type devmgmt.msc and check if the device is detected.
   
  Method 4:
  Check if the problem persists in the boot.
  Reference:
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
  under more information to prepare the computer to start as usual after a repair.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Windows 7 not recognized as true after reinstalling on one machine virtual Parallels Desktop

  Hi all -

  I'm a Mac user running Windows 7 on my virtual machine (Parallels Desktop).  I did for years, even the upgrade to Windows 7 after using XP for a long time.
  Recently, I had a problem with the upgrade of Parallels Desktop, which could only be repaired by removing and then reinstalling the Virtual Machine Parallels.  This, of course, obliged me to reinstall all programs (including Windows 7).  Since I bought my Windows 7 and Office 2010 at Staples (Yes... not online or eBay copy here), I know that my copies are authentic and I used Winows 7 for the years leading up to this relocation.  I still have the original case, the disks and the sticker with the product key.  I used this key when I did the re-install and everything worked perfectly... until today when I turned on the virtual machine and he asked for me to enter the product key, say something (I'm sorry I didn't write that down) on the exhale.  I got my key, Windows 7 came out, but it is said that "this copy of Windows is not genuine" I get message "you can be a victim of software counterfeiting".  Once again... I bought full fare at Staples, so I do not know is not the case.
  Any suggestions?
  Thanks in advance for your help.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• After that the last windows update windows is not recognizing mynorton antivirus

  I did the recent update of windows on 16/10/12 and norton antivrus also updated.  I have 205 days remaining on my norton subscription; However, when I turned on my computer today windows Action Center prompted me that my firewall is configured incorrectly and windows does not recognize a virus on my computer.  My Norton is still listed as a program on my computer and I can access them from the menu programs.  Help, please.

  Hello

  Thanks for posting the question. I will help you find a solution about the Norton as antivirus programs. Before that, please answer a few questions in order to refine the question.
   
   
   
  1. What is the exact error message?
  2 do you have any other installed third-party antivirus program program Norton?
  3. to confirm, is Norton works properly after the update?
  Method 1: Perform the steps described in the article

  Report on the health system does not detect in Windows 7 antivirus programs

  http://support.Microsoft.com/kb/2482947

   
  
  Method 2:
  
   
  If Norton works very well and you still get an error message from Windows. I suggest you to refer to this article to disable the notification. If Norton displays an error message, just reply back to us.
  Use antivirus software that Windows doesn't find
  http://Windows.Microsoft.com/en-us/Windows7/use-antivirus-software-that-Windows-doesn ' t - search
  
  Method 3:
  If you have multiple antivirus programs installed on the computer other than Norton, please uninstall and check.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
   
   
  Hope this information helps. Response with status so that we can better help you.

• Windows 7 not recognizing network adapter

  Windows 7 works in Bootcamp and I am able to connect to the internet.  When I run Windows 7 in Fusion, Windows 7 does not recognize the network adapter.  I have tried both wireless and Ethernet, but unable to get online.  I also tried to load the driver through the Mac OS disk but back Windows do not see the correct network card driver here either.

  Thanks in advance.

  Take a look at the configuration of the Virtual Machine's .vmx file and make sure that the NIC is showing that "e1000" as follows example and if not add it.

  ethernet0.virtualDEV = "e1000"
  

  To get the location of the .vmx config file check out VMware Fusion A Beginner's Guide and or collect Information for VMware Fusion.

• Windows 7 not recognizing memory sticks in slots USB

  Hi when I put the memory stick to any USB on the computer, I receive a message first came to ask me to format the memory stick. I even get this if I enclose my TomTom GPS on the same USB slot.   If I click on the drive designation, I get the following message:

  {{K:drive is not accessible. The volume does not contain a recognized file system. Make sure that all required file system drives are loaded and that the volume is not corrupted.}}

  I know that the sticks of memory are OK, as I have tried several and also tried all the USB slots on the computer and another computer.

  I don't remember doing anything for having caused the problem since the last using the disks of the USP.

  Using windows 7 Home premium.

  Anyone know what is the problem and how to fix it please?

  Concerning

  Windows7RULES

  Finally, I used a data recovery program.  Recover all files and files downloaded from the sticks of memory on my hard drive.  Formatted in NTFS and I am now able to use chopsticks as well as my recovered data, the sticks of memory.

  All sorted

  Concerning

• Windows 10 not recognized as being superior to 7

  I have an iMac, retina.

  

  I'm trying to bootcamp Windows 10. Bootcamp Assistant does not like being a newer version than 7. He says that he cannot find an installer, although there is a bootable USB key, it made my Windows 10 DVD Installer. There is also an ISO on the desktop.

  I had to do in bash bootable installation disk using dd, because the disk Util and Bootcamp Assistant kept throwing errors when I tried to stick it to their use and ISO installed I downloaded from Microsoft, in accordance with the instructions from Apple. I keep looking for help and Advisor tells me that these problems do not occur, then two, that some people actually manage to do it without all the pain I feel. If those who have also had difficulties could share their solutions would be great

  

  

  Remove all the drives external, other than your USB2 flash drive. The ISO W10 must not be mounted.

  Please perform the following two procedures, before your next attempt to install W10.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you downloaded the ISO W10 via a wireless connection, check the size and MD5sum of the ISO.

  LS - lgh Win10_1607_English_x64.iso

  -rw - r - r-@ 1 staff 4.1 G 17 Jul 17:28 Win10_1607_English_x64.iso

  OpenSSL md5 Win10_1607_English_x64.iso

  MD5 (Win10_1607_English_x64. ISO) = 88b98698600511dcd69596df92b242e5

  If you are using an ISO, display the name of the file and the MD5sum.

• G510 Windows 10 not recognized Bluetooth (resolved)

  I have Bluetooth with G510 problems from the beginning. It worked only with Windows 7 and not 8 and now not working with Windows 10.

  I downloaded 10 Bluetooth Windows drivers. But when I run the installer, its says "no suitable driver must be installed. Also, there is no Bluetooth or missing drivers in Device Manager.

  I installed the management of energy, but there is no option to activate Bluetooth. F5 key does not work. F7 key only disables or activates a wi - fi connection. Windows 7 energy management, there is an option to activate the bluetooth but not at this one.

  I'm really sick of Lenovo Bluetooth problems. For once I'm not going to be able to use Bluetooth?

  I solved the problem by following the advice you gave to this message.

  I have uninstalled the software of management of energy, this old versioninstalled, you press Fn + F7 and activated Bluetooth.

  After that, peripheral Broadcom Bluetooth became visible in the Device Manager and I was able to install the drivers.

  Why Lenovo is torturing us like this? Why did remove the option to enable Bluetooth since the current energy management software? It's really amazing...

• Windows Vista not recognizing the USB 2 TRPPLITE port device

  Having a desktop computer running Vista that says it needs a driver to recognize my port switch 2 TRIPP-LITE my Netbook running windows 7 starter edition had no problem? Help pleasei

  Win 7 probably has a built-in function that Vista does not work.  You can look here to find the right one for your system.

• Windows 7 not recognizing not not the password to log on

  I have been using Windows 7 during about 3 months without problem. Yesterday, it started to give me the message: "username or password are incorrect." When I continue to log on, using the same password, he finally accepts after 3 or 4 attempts.  The caps lock is NOT on and I'm sure my password.  I tried to get into the control panel and change the password, but I get the same message as the password (finally allowed me to log on the computer) are incorrect.  I did a virus scan.  Any help?  I wonder if it's a Windows 7 problem.

  If this isn't a typo problem, then this is a keyboard problem. I recommend that do you this to make a simple password like 123456, then test for a while before you change it to something more complex.
  1. click on start, then type the three letters cmd into the search box and press ENTER.
  2. type this command
  NET user "user %%nom" 123456
  3. press enter

  The advantage of this method is that you can see what you type.

• 8.1 Windows password not recognized after updates

  After you have installed the Windows 8.1 updates a lot on my new computer, my password does not work more.  Given that I have not yet created a Microsoft account, I can't use this path to get it back. What should I do?

  I discovered what caused this problem.  I bought a laptop with the Swiss German keyboard.  However, I use the English version of the operating system and applications.  As one of the first steps after I activated my new laptop HP Envy, I downloaded and installed all the updates of security to Windows 8.1.  These updates changed PC settings for the keyboard, in particular, to the English keyboard.  In addition to the special characters for the German language, the letters Z and there are reversed on the Swiss German keyboard.  My password included the letter Z, which, after updates, was awarded to another key, namely that of Y.  When I typed Y instead of Z, the system unlocked and I could see then in detail how the settings have been changed.  This is unacceptable!  Also, my old laptop, ThinkPad T series, has a Swiss German keyboard and running the English version of Windows XP.  In six years, I have been using this system, I've never known such a problem!  I hope I won't have to change my settings back after each Windows 8.1 update!

• Windows 7 not recognizing not not hard drive enclosure

  I want to access (files) to a XP disc that would no longer start. I bought a hard drive enclosure, installed XP inside drive and plugged into my new computer (Windows 7). Windows Explorer does not display the drive, even after restarting the computer again. Why?

  Go to disk management and assign a drive letter to the disk.

• Product key of Windows 8 not recognized

  Hello, I bought the laptop Sony Vaio with pre-installed Windows 7 Home Basic (64-bit) and subsequently upgraded to Windows 8 Pro purchase online, then to 8.1 - courtesy of Microsoft and finally to 10 Windows - all were working well. Recently I had to format and install by default. Everything was fine and worked well. But when I tried to upgrade to Windows 8 Pro with my product key purchased, during the upgrade, it says that the product key is incorrect. I had checked and re-checked reception P key, I got saved in my folder and found it very well. However my several attempts proved futile, and I couldn't move to Windows 8. Someone please help me with a solution and force. BTW, sorry my English is not good. Thanks in advance and best regards.

  You can get the 10 Windows installation here, media https://www.microsoft.com/en-ca/software-download/windows10

  What is classified just Windows 10, is a multi ISO edition that can install Home or Pro. I use the option create a media and make a bootable USB thumb. Then do a clean install. Another thing probably just modernize you home. Boot from the USB key, simply run setup.exe from windows. When you are installing, select Pro, click on ignore when it asks for a key. It will activate with your digital documents. There is a checkbox on the download tool when you run to "use the recommended options. Uncheck that box and you will get full menus for the version and language. If you don't see the options you want.

  In this situation where you arrived home, but must have got Pro, you can make a change product code and enter this code VK7JG-NPHTM-C97JM-9MPGT-3V66T. It will be upgraded to Pro and then with digital law. My laptop has a Core 8.0 OEM key. I get 10 home automatically. I upgraded originally from 81. Pro. I had to do the above to retrieve my Pro.

  http://www.tenforums.com/tutorials/2376-USB-flash-drive-create-install-Windows-10-a.HTML?filter [2] = Configuration / Installation

  http://www.tenforums.com/tutorials/1950-Windows-10-clean-install.html

• WIndows 8 not recognized Microsoft Bluetooth enumerator

  I have a Lenovo Y510P and have the Microsoft Bluetooth Enumerator settled and says it's working properly according to my bluetooth. When I go to add my bluetooth mouse will not display even my mouse as a possibility of connection and said that my laptop needs troubleshooting because it lacks the driver Microsoft Bluetooth Enumerator. I tried the troubleshooting, and it comes up saying that the issue was not fixed.

  Hello

  Please contact Microsoft Community.

  This issue may be caused if the drivers are missing Bluetooth device you are trying to connect.

  To better help you, could you please confirm a number of things like:

  1. What were the changes made to the system prior to this issue?
  2. Do you have an error message while trying to connect Bluetooth?
  3. What is the brand and model of the device that are trying to access using Bluetooth?

  I suggest you follow the steps below and check if it helps.

  Method 1: Try the procedure described in the following Microsoft Help article and check.

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Method 2: you need to check if the Bluetooth Support service is activated or not, follow the steps below:

  1. Press Windows + R keys and choose RUN.
  2. Type services.msc in the box RUN
  3. Bluetooth support service search
  4. Double-click it and check the status
  5. If the service is not started
  6. Start the service.

  Method 3: You need to update the drivers from Windows Update, follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.