Windows 7 on a T760 Pavillion

Similar Questions

• Windows error install on HP Pavillion with Vista

  MY laptop is a HP Pavilion dv5 1223TX, I had problems I did a factory reset via the Recovery Manager, I have installed all updates to Windows because it helped, I am trying to download the software I was using before resetting, as iTunes, Java etc. but I get an error message ' could not access the windows Service install. This can occur if Windows Installer is not correctly installed "I tried various downloads to remedy this, but nothing helped. Any suggestions please?

  Hello Cam,

  You are the very welcome.

  Have a great day!

  Jaco

• Re-install Windows Vista on laptop HP Pavillion

  I have a laptop HP Pavillion accompanying without disks.  I did the system disks receovery.  I had to replace the hard drive and before I can get back to the original system, I need to reinstall Vista.  How can I do this without having to buy the software again?  I have my original product key.

  See: Start the recovery disc restore
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00814731#c00814731_disc Carey Frisch

• Need Driver for Hp Pavillion 15 - n040sx drivers for Windows 7 64 bit

  I had installed Windows 7 in my Hp Pavillion 15-n040sx. I need emergency drivers for the same model, especially the Wifi driver. Please help me with this. I had looked everywhere but can't find anything. Here also I saw a link for the drivers of the same model, but the wifi link is dead. So please provide me with the latest drivers.

  Network controller

  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40628086 & REV_73
  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40628086
  PCI\VEN_8086 & DEV_08B1 & CC_028000
  PCI\VEN_8086 & DEV_08B1 & CC_0280

  Ethernet

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2166103C & REV_08
  PCI\VEN_10EC & DEV_8136 & SUBSYS_2166103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI DEVICE

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2166103C & REV_01
  PCI\VEN_10EC & DEV_5227 & SUBSYS_2166103C
  PCI\VEN_10EC & DEV_5227 & CC_FF0000
  PCI\VEN_10EC & DEV_5227 & CC_FF00

  PCI SIMPLE COMMUNICATION controller
  PCI\VEN_8086 & DEV_9C3A & SUBSYS_2166103C & REV_04
  PCI\VEN_8086 & DEV_9C3A & SUBSYS_2166103C
  PCI\VEN_8086 & DEV_9C3A & CC_078000
  PCI\VEN_8086 & DEV_9C3A & CC_0780

  3D video controller
  PCI\VEN_10DE & DEV_1292 & SUBSYS_2166103C & REV_A1
  PCI\VEN_10DE & DEV_1292 & SUBSYS_2166103C
  PCI\VEN_10DE & DEV_1292 & CC_030200
  PCI\VEN_10DE & DEV_1292 & CC_0302

  Intel R

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2166103C & REV_04

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2166103C
  PCI\VEN_8086 & DEV_9C31 & CC_0C0330
  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  UNKNOWN DEVICE
  ACPI\HPQ6007
  * HPQ6007

  UNKNOWN DEVICE
  ACPI\INT33A0
  * INT33A0

  Please help me to get these drivers for Windows 7... Thank you

  Hello

  Please get all your drivers on the website of the product drivers:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6604116#N8190

  Search for the name missing drivers from Device Manager & then download, save, and install from the site I posted.

  Reboot after each installation.

  Concerning

  Visruth

• A5F92AV Pavilion DV7T-7000: Portable HP Pavilion is not completely turn off car Windows 10 improvement

  Hi there HP community.

  I had an availability upgrade to Windows 10 quite awhile, but I waited to upgrade until my computer has confirmed that my PC is ready for the upgrade.

  Since the upgrade to Windows 10 my laptop HP Pavillion is not entirely closed. The screen turns off but the power biutton is always lit.

  I used my HP Support Assistant looking for new drivers, but it seems that I am up to date.

  I did the same with Windows Update as well.

  Has anyone else encountered this problem?

  Someone at - it solutions?

  I hope someone can help.

  Thank you

  mitchmatch1

  Thank you
  mitchmatch1

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• LightScribe works with windows 8

  I've updated to Windows 8 in my HP Pavillion M8530f PC. Now I'm not able to use the Lightscribe Direct Disc Labeling original that came installed on my PC. Is there a way to use Lightscribe with windows 8... ??

  Any help/access map will be more appreciated.

  Thank you.

  ACMIAMI, welcome to the forum.

  Here is the version of the Lightscribe software that Microsoft is compatible with Win 8.  I am not sure if HP has made changes to their readers, but otherwise, this should work for you.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Activation windows 7 home Basic 64 bit with key to windows 7 home basic 32-bit retail

  Hello! I want to buy a boxed version (detail) of windows 7 home basic 64-bit, but it is only available in 32-bit.

  Question #1: Can I use a key that comes with the 32-bit version of detail to legally activate 64-bit, installed version using an iso image, uploaded by a link on your website (answers.microsoft.com)?

  Question #2: I can activate the same system, but on the other language, using a key in a retail area? For example, I purchased a Georgian version of Windows 7 Home Basic 32 bit retail, but installed an English version of Windows 7 Home Basic 64-bit (iso obtained by your link); can I legally activate it?

  Please answer in advance!

  Hello! I want to buy a boxed version (detail) of windows 7 home basic 64-bit, but it is only available in 32-bit.

  Question #1: Can I use a key that comes with the 32-bit version of detail to legally activate 64-bit, installed version using an iso image, uploaded by a link on your website (answers.microsoft.com)?

  Yes, see:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/HP-Pavillion-DM4-with-Windows-7-Home-Basic-OA/d835be2f-bcd0-44ff-91F3-bd5d5550c58d

  Question #2: I can activate the same system, but on the other language, using a key in a retail area? For example, I purchased a Georgian version of Windows 7 Home Basic 32 bit retail, but installed an English version of Windows 7 Home Basic 64-bit (iso obtained by your link); can I legally activate it?

  Yes, see the link above.

  Please answer in advance!

• No sound after installation of Win 7 w/flag a1430n

  Hey, I just did a full install of Windows 7 on my HP Pavillion A1430N and I have no sound. Got the red x next to the speaker in the system tray. I saw then that the research that loosened the sound is common with this update/install, but I have not seen my question specifically. When I do the audio problems, he claims that the speaker/headphone are not connected. Although they are. I have connected front and the PC using back the catch designated and used two different sets of speakers. Device Manager indicates that there is a sound device and that it works correctly. When I hit the tabs for more details on the pilot, etc., I get a very generic, "High definition Audio Device", but no details. Indicates the version of the driver 6.1.7600.16385, by microsoft. appreciate the help

  Realtek HD Audio_choose High Definition Audio Codecs, contract, then download the file "Executable":

• HP pavilion g7: ethernet controller Hp pavilion g7 missing w7 & PCI device

  Hello, can someone please help me find drivers for Windows 7 for my HP Pavillion g7? The hardware IDS are:

  Ethernet controller:

  PCI/VEN_10EC & DEV_8136 & SUBSYS_3568103C & REV_05

  PCI/VEN_10EC & DEV_8136 & SUBSYS_3568103C

  PCI/VEN_10EC & DEV_8136 & CC_020000

  PCI/VEN_10EC & DEV_8136 & CC_0200

  PCI device:

  PCI/VEN_10EC & DEV_5209 & SUBSYS_3568103C & REV_01

  PCI/VEN_10EC & DEV_5209 & SUBSYS_3568103C

  PCI/VEN_10EC & DEV_5209 & CC_FF0000

  PCI/VEN_10EC & DEV_5209 & CC_FF00

  Thank you in advance!

  Realtek Ethernet:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229457&IDX=&swEnvOID=4059&action=driverDocument&itemLocale=&swLang=&swItemId=ob_123192_1&mode=

  Card reader:

  FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52798.exe

• DeskJet 6988

  My problem is how do I get my printer HP Deskjet 6988dt printer to print "double-sided automatically? I installed Windows 7 Pro to the top of Windows XP PRo on my Pavillion a1620y office. I connected directly to my Wifi SMC router and the software of the system 7 installed the printer, but it will only print "2 Facer" manually.  There is no updated driver from HP printer. Anyone know if there is a work around for this situation? The original installation discs will not work under Windows 7.

  I would have stayed with XP, but everyone now knows the drill, it's old so I guess you're supposed to just junk and by brand new? It's not very 'green' companies. I bought a new HP Lap Top a little more than a year with Windows 7 and it seems to work very well most of the time but it has some issues as well.

  Thank you

  Hello skinner67,

  Welcome to the Forums of HP Support!

  I understand that you have recently upgraded to Windows 7 XP, now the Deskjet 6988dt won't automatically duplex manual is available.

  If you open devices and printers > Deskjet 6988dt right-click, and then click printer properties. This window should open:

  Once installed together to try to print, make sure you click Preferences or properties and you should get this:

  I hope this allows you to you to be able to automatically duplex again.

• Cannot scan PDF

  After a glimpse of Windows 8 crashed my HP Pavillion a6857c and I had to go back to vista 64-bit my printer Hp OfficeJet J4580 and solutioncenter 10 started in error messages which scan doctor would fix, now I get this error 8 [(6,1018,-2147220486)] if I try to scan anything not Tiff and doctor scan cannot be resolved I've updated the solution Center 13 always the same. I tried at least 3 weeks to fix this

  Looks like you are having some problems with scanning. To begin with, allows to execute a quick uninstall and reinstalling the software. I made this process easy with a simple statement that I put below:

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• CD-ROM/DVD-Rom missing or disappeared

  Hello Microsoft community.

  I wanted to know if anyone has a solution to make my DVD/CD drive back drive work on my computer?

  I am running Windows Vista on a HP Pavillion laptop on a little more than a year)

  A couple of days, I noticed my CD-ROM/dvd-rom was missing from 'My Computer', which was listed as E drive and missing from my list of Device Manager.

  In my registry upper/lower filter is NOT listed

  However, DVD/CD Rom Drives IS listed as a default value in the registry TYPE: REG_SZ

  and CD ROM IS listed as (class) in my registy-TYPE: REG_SZ.

  -J' tried the restore and - last good known already

  but it did not help.

  Thanks in advance for any help you can offer to solve my problem

  kb2009

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Pavilion a6838f: modem does not work

  original title: hp Pavilion a6838f

  I have windows vista 64 bit hp pavillion desktop

  This is the modem does not work, however, I have to be online to download updates of my software that I use in this regard.  Anyone know if it is possible to connect this with another desktop computer and download the software to the one with the modem and install it on the hp?  My manual says nothing about this.

  You need to set up a network with Internet connection sharing. http://www.windowsreference.com/windows-vista/step-by-step-internet-connection-sharing-ics-setup-in-vista/.

  Here's how to connect the computers using a crossover cable (which is the cheapest solution):http://windows.microsoft.com/en-US/windows-vista/Connect-two-computers-using-a-crossover-cable.

  Your computer without connection will actually have a connection to the other computer, then you can do what you need to do.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printers disappear & sometimes reappear in the Panel

  Windows 7 (64 bit) HP Pavillion Desktop P6616f
  My HP 2 (Laserjet 1022, Officejet 5610) printers keep disappearing printers & faxes in my control panel. If I disconnect and reconnect the cables to the printer from the USB ports or start the computer with the USB unplugged and plug them in after booting, printers 'sometimes' reappear. I'll print a few things like a Word doc and then all of a sudden, I get a message that there are no printer and (devices and printers) Control Panel no longer has the printer icons. I KNOW THEY ARE THERE. Printers everything worked perfectly for 6 months and then all of a sudden this appear/disappear started happening.
  Drivers must be ok that everything has worked well for many months before it started and the o/s remains the same, with the exception of Windows automatic updates which are automatically installed.
  Tried to make printer sharing with my laptop which is running Vista several months ago but couldn't get it working. Don't know what parameters were affected, but the HP desktop computer where I have the current problem has always worked with printers. Thanks for the help.

  Hello

  I suggest you run the printer Troubleshooter follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• Installing Win 7 drivers

  Hello... I do a clean install of Windows 7 64 bit on Pavillion DV7.  Is there an order preferably to install the drivers of HP?

  DigtalC wrote:
  Hello... I do a clean install of Windows 7 64 bit on Pavillion DV7.  Is there an order preferably to install the drivers of HP?

  The chipset drivers must be installed first, followed by the video... then it doesn't really matter a lot.  If you can't find all of your drivers, use Windows Update and search under the optional updates.