Windows 7 on a Vaio VGC-LV150J

Similar Questions

• Sony VAIO VGC-LS30 memory

  Is it possible to upgrade a Sony Vaio VGC-LS35 more than 2 GB of RAM?

  Hi oldcutler!

  Based on the specifications of your VAIO computer.

• Where can I find the implementation hints for my xbox media center-8 digit code working on my vista sony VAIO VGC LS30

  I have a XBOX360 and it's hooked up to my Sony VGC LS30 all-in-one with an audio and video entry for my Media center and it asking me to place and extension and when I do want a 8 digit code? where can I find the code to 8 digits.

  Thank you

  Jimmy

  Hi Jimmy,.

  I suggest you to send your request in Forums Xbox to better support:

  Xbox forums

  For more information:

  Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit

  Configuration of your Xbox 360

  Set up a Windows Media Center Extender device

• Activation of Windows 8 on the Vaio tap 20 error

  Hi I reset my Vaio Tap 20 and now Windows 8 requires activation. I'm learning the product ID is enbedded in the BIOS but after restoration / resetting the BONES, I have an activation error. Microsoft needs the product ID to give me the code of Activation but when I type SLUI 04 product ID is empty - I was told thisAuto fills when reintalling windows from the recovery partition, but it didn't happen. Is there a way to force information from the BIOS to the BONE? S ' Please help...

  Is the model number: SVJ20215CGB

  You can restore the original Windows 8 operating system by accessing the recovery partition. The recovery partition is accessible by turning on your computer using the ASSIST button on the device.

  Try the following steps mentioned here. How to perform a system recovery from outside of Windows

• I installed Dell Windows Vista on the Vaio, I can't do the drivers and software

  I have the Sony Vaio VGN-CR220E Vista Home Premium was pre installed on. I had to reinstall and borrowed A friends Dell CD. Nothing works right. How can I get the right programs for my Vaio

  It does not work like that

  You cannot use a disk from Dell on a Sony Vaio.

  http://eSupport.Sony.com/en/VAIO

  Here are the General news for the recovery to factory settings:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Ask for help with reinstalling Windows 7 on Sony Vaio

  Hi all

  I have a Sony Vaio Y Series in which I installed a pirated Windows and also improved version at 10. After these two cases, my laptop has become very slow and can barely use it. Now I want to reinstall the Windows 7 Home Basic 32 bit original version which is pre installed, but I don't know if I have a DVD with it or not.

  If I buy an original Windows of any of the online sites, it'll work, or must it be model specific?

  Can someone tell me how to restore the original version now? I don't have the bifurcated drive where the original should have been in the store. I am based in the India but bought the laptop in Saudi Arabia.

  Any help will be really appreciated.

  Contact Sony:

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Windows 7 driver sonz vaio mass storage controller does not

  Hello

  I run a windows 7 32-bit operating system in a Sony VAIO. In recent years my driver DVD player was defective and I recently learned that I have not driver mass storage controller or it has been blocked by a previous update. Could you help me with a way to download or to buy a new and correct a?

  Thank you

  Hello Rodrigo,

  Thank you for your response.

  I appreciate your time.

  I suggest you to update all the drivers of motherboard from the following link and check.
  Reference:
  http://www.Sony.co.uk/support/en/content/CNT-DWNL/VGN-CR31S/List#.

  Please keep us updated.

  Thank you

• Synchronization problems Blackberry Bold 9700 with Bluetooth of Windows 7 drivers Sony Vaio SZ series

  I have recently upgraded to Windows 7 with a clean reinstall on my laptop Sony VAIO VGN-SZ470N. Full specifications can be seen here: http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&kw=vgn-sz470n/c&lp=8198552921665095013&productId=8198552921665095013#footNotes

  My goal: to sync my new Blackberry Bold 9700 wireless via bluetooth using the built-in radio. Many people have had problems with this and the forums are littered with solutions that have worked for others, but I'm having no luck.

  So-called: Device Manager software Blackberry won't recognize devices that are managed by Windows Native Bluetooth stack.

  What I did:

  Windows will automatically detect my bluetooth radio and installs the "Bluetooth USB Controller (ALPS/UGPZ6)" (hardware ID: USB\VID_044E & PID_300D & REV_1915, USB\VID_044E & PID_300D) driver. With this driver, I can go to the "add a device" with my phone in discovery mode, and the computer will not conclude it.

  If I go in ' control panel-> add devices ", the Add Device Wizard window will tell me it's looking two detectable Bluetooth devices found in the range. I went into control panel of-> see devices-> UGX (which resembles a bluetooth adapter bit) and there was no "bluetooth settings option when I would right click."

  After reading on the Blackberry forums that the BB only synchronizes with the Bluetooth of Windows stack, I updated my driver ALPS/UGPZ6 to "generic bluetooth adapter. The selection of this driver also installs driver for "Microsoft Bluetooth Enumerator. It also adds the bluetooth icon in the lower bar of good start near the time and date. I can now go to 'Add a device' and it will show my BB 9700. When I connect, matching Assistant is displayed on my phone and in windows. I enter a code on my blackberry and enter a code in the wizard windows. Both devices and then tell me that pairing has been successful. However, the two machines are.

  Once the BB is paired, tent windows install the drivers of the two newly discovered devices, then gives me an error and States that the drivers cannot be installed. It is said that it is impossible to install two drives, both devices are listed in the device as "Bluetooth Peripheral Device" Manager (Hardware ID BTHENUM\ {426c6163-6b42-6572-7279-44736b746f70} _LOCALMFG & 000D).

  In "devices and printers > Bluetooth' BB 9700 is now listed with a status of 'troubleshooting needs'." Although the devices are paired, the BB will ever show a status of connected, rather it will continue to just try to connect every two minutes or more. I can connect to my friends MacBook, but I have no idea how to test the fact that the connection works. I also noticed that in the screen 'Add features' phone bluetooth of my roommate. So, I looked for ways to resolve the missing drivers.

  I found three solutions supposed for the driver installation error which has not WORKED for me.

  (1) the first is to right click on the two strangers 'Bluetooth' devices in Device Manager and updated the driver in both cases to "RIM Virtual Serial V2". When you try to implement this solution, the status "needs Troubleshooting" will disappear, but blackberry Device Manager will not find the BB 9700 to add for bluetooth sync. Nothing else seems to change. Complete instructions for this solution have been listed here: http://supportforums.blackberry.com/t5/BlackBerry-Pearl-BlackBerry-8100/Need-Bluetooth-Peripheral-Device-driver-to-connect-to-8120/m-p/263541

  The other way, I tried to fix the driver error problem was to remove all the listed drivers and reinstall the generic Bluetooth USB controller and the enumerator. Then I went and downloaded the Windows Mobile Device Center Driver Upgrade. For the two unknown devices labeled "Bluetooth Peripheral Device", I chose the Bluetooth radio driver > Microsoft Corporation > peripheral support Windows Mobile.  Once again, the status in devices and printers troubleshooting message > Bluetooth devices disappear, but still the Blackberry device manager can't find the phone. I found the original steps for this here: http://www.computers.nepalesemap.com/index.php?topic=3.0

  (3) supposed to be the reason why the blackberry will not sync with the ALPS driver installation is because the windows bluetooth stack does recognize it not as compatible. So I uninstall the Bluetooth devices and blackberry. I restarted and the computer reinstalls the driver ALPS.

  I found a solution which says to edit the c:\windows\inf\bth.inf file and add the hardware ID that is listed in the device under the ALPS HardwareID driver manager. I have add the ID of the hardware to the list of devices, but the bluetooth enumerator installs ever, and I can't access the Bluetooth settings.

  Does anyone else have this problem? Can anyone help!

  
  

  Hi Cptnnemo,

  How do you close the computer, you have your Blackberry?  As with any Bluetooth, the device must be 3-4 FEET away from being discovered.  Please follow the instructions on the MSFT made, then try to keep your 3-4 feet away and try the discovery mode.

  Mithdraug

• Can I update my windows computer laptop sony vaio 8 Windows 8.1?

  Hi all, I'm still using windows 8 on my laptop.  is that my pc can upgrade to 8.1 windows?

  my computer model laptop vaio SVE11126CAW

  Hello Marcpo,

  Thanks for posting.

  Yes, you can. But first, you must install all of the Windows and VAIO updates available.

  Kind regards

  Yuri

  If my post answered your question, please mark it as "accept as a Solution.

• DeskJet 3050 has J611 printer, windows 7 64, sony vaio F series with router netgear seem incompatible

  I was able to connect successfully the printer to my computer sony vaio notebook, as much as I first disconnect internet router, after that the installation I can connect internet once again, then it works for a few hours. However, when I turn off and restart the computer, the computer does not find the printer. Meanwhile, the printer is connected and has the correct network and are accessible from my Ipad or eprint, but not of my sony vaio. I tried all the solutions proposed in the various forums without success. Can anyone help? I also checked that my computer is on the same network. The printer appears "shadow" under devices and printers. Thanks in advance.

  What router are you using?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for the second.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Why can't I watch videos on my windows computer laptop sony vaio 8

  I have a new laptop with the latest update of windows 8 and I can't watch any media for example YouTube videos downloaded or any sort like that please help

  go to videolan and download vlc he usually plays all kinds of media file types.

• How can I disable the touchpad on a Sony Vaio with windows 7

  Since installing windows 7 on Sony Vaio, I can't find the settings to disable the built in touchpad when using an external mouse, especially the Ow click on the function.

  Any help apprecated

  Maybe it's a Bios setting, your best place to ask would be Sony forums (and specify your model)

• cannot open media gallery in windows 7 sony vaio model VPCEG37FM

  Dear Sir/Madam,

  I can't open my Media Gallery problem in windows 7 pc. sony vaio model No. VPCEG37FM
  Don't know when it started the problem
  but I'm opening after both days is there is perhaps that it is not woking now.
  PLS, help me sort out them of this
  Thaking you
  concerning
  Sanjit

  Hi Eric,.

  Given that the problem is related to Sony Media Gallery, you may need to contact Sony directly to get this fixed number.

  http://eSupport.Sony.com/

• Where do you find the audio updated drivers for vaio, during the upgrade to Windows 7?

  I've recently updated by VAIO laptop to Windows 7.  Since that, I have no sound.

  I was told that I need to update my audio drivers.

  Sony can't stand my VAIO, which is a computer prior to 2009.

  Does anyone know where to find the improved audio drivers that are compatible with Windows 7 for the VAIO?

  Thank you.

  Gerard

  Hi Gerard,.

  You can try to visit the website of the manufacturer of the audio device and manually download a updated driver there.

• How to re install windows 7 on my Sony Vaio.

  Hello I am shyam, I bought the Sony Vaio before 1 and 1/2 years. Windows 8 is now lunch. I saw special offer of 8 Microsoft windows upgrade web page $39. I like designing subway windows 8 so that I update windows 8 online. after upgrade my laptop does not work correctly. and I searched sony CDs that come with my laptop and install windows THAN XP... but I don't like the windows xp and you want to back up windows 7 please how can I recover windows 7 in my Vaio laptop please suggest me ASAPWin

  Hello I am shyam, I bought the Sony Vaio before 1 and 1/2 years. Windows 8 is now lunch. I saw special offer of 8 Microsoft windows upgrade web page $39. I like designing subway windows 8 so that I update windows 8 online. after upgrade my laptop does not work correctly. and I searched sony CDs that come with my laptop and install windows THAN XP... but I don't like the windows xp and you want to back up windows 7 please how can I recover windows 7 in my Vaio laptop please suggest me ASAPWin

  Which is determined by the manufacturer of the system.

  You'll maybe order new media recovery/restore and/or download an ISO of the edition of Windows 7 and the architecture you need, burn a DVD and perform a clean install to use it and the product key on the sticker on the system itself.

  Contact Sony and get a restore/recovery of them media