Update is not recognize me as an administrator, the only account on my workstation.

Similar Questions

• Windows 7 does not recognize me as an administrator and do not make changes to the notifier of explicit congestion using cmd

  Windows 7 does not recognize me as an administrator and do not make changes to the notifier of explicit congestion using cmd

  I am the administrator also have an account invited and created another user account to see if this helped (she didn't)

  Hello

  If you use the command prompt, you must bring up the command prompt.

  Go in Start / All Programs / Accessories.

  Click on the command prompt and select run as administrator .

  Concerning

• Try to install portable computer on a new cs6 hearing. original disc was purchased 1.5 upgrade in 2012. Update does not recognize my 1.5 as a 'product calling it '! This happened last time as well. Adobe ID < deleted by the moderator >

  Try to install portable computer on a new cs6 hearing. original disc was purchased 1.5 upgrade in 2012. Update does not recognize my 1.5 as a 'product calling it '! This happened last time as well. Adobe ID < deleted by the moderator >.

  Then please use the Contact Customer Care.  If this link does not work then I would recommend using another computer, smartphone or tablet to contact our support team.

• WinXP Pro 2008 does not recognize my computer drivers & load the standard drivers 2001

  WinXP Pro 2008 does not recognize my computer drivers & load the drivers of standard system of 2001; Impossible to upgrade

  then load systemroot, I don't want systemroot, also charges 3.1 drivers, 95, 98. 2000 & winnt 3, 4, 5 &

  Sometimes it runs under DOS only & sometimes not

  I don't want to network & sharing, because there's someone attached to my system & load malware {pirate just deleted} & takes control so I'm at work & then interupts me online with flash & js causing anomalies onscreen, resumes also connection & homepage.

  Now my Norton is denied access (& other programs) & I can't use it

  Suffered disc & reworked several times, I tried the sharding & partitioning is not on all COMPUTERS

  This pirate has done this for 12 years, 7 computers & 5 operating systems.

  SOMETIMES HE TAKES CONTROL OF MOUSE & KEYBORD. YOU SHOULD SEE MY CDROM CONTROL CD ABNORMALLY.

  This is clearly abuse & I am at my wits end! Help me get rid of this danger, please

  but hidden.
  Try this, go to disk management (Control Panel, administrative tools, computer management).
  They appear here? If so, you may need to reassign a drive letter for them.

  If not, look in Device Manager, they appear in red/yellow or is there any "unknown devices"?

  Windows cannot have the drivers either, so you can download the drivers from the manufacturers Web site.

  1. start the computer.
  2. press F8 repeatedly to display the start menu.
  3. Select safe mode in the start menu.
  4. right - click on "my computer".
  5. Select Properties.
  6 select the Hardware tab.
  7. click on the button "Device Manager."
  8. click on the (+) plus sign next to CD/DVD players.
  9. right click on each component and select uninstall
  10. follow steps 9 to all components under this category.
  11. restart the computer.

  It must reload the drivers for the CD/DVD drive.
  or

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00619385&LC=en&cc=us

  check on this site how to connect dvd cd players

  I tried the following to help resolve the problem:
  1 attached Mouse, provided power but does not recognize the device. Assistant add hardware does not yet come upward.
  2. 3 readers USB flash, in every port and they were not recognized or attached.
  3 uninstall all devices of USB root hub and rebooted. No change.
  4 uninstalled all the USB controllers and restarted. No change.
  5 install a logitech mouse driver that is the same as the mouse installed. The mouse has not always recognized.
  6 re-flashed the BIOS. No change
  7. utility of diagnosis of Dell Ran and no problem found with the controllers or the USB ports

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• Failed to install KB2898785. Error, "updates were not correctly configured. Returning from the changes.

  32-bit o/s. Vista Home Premium. All scans/checks indicate no problems

  "Updates were not correctly configured. Restoration of the changes. ....." Advice please?

  M/S Rep told me that the (free) support for Vista is no longer available. Could the problem of security identified in the software of M/S already affected my system (published 12/10/2013 refers)?

  Hello

  I wish that refer you to this article-

  https://support.Microsoft.com/kb/949358/en-us

  Note: Make sure that you get the computer back to the Normal start once you have completed the troubleshooting steps.

  Make sure that you back up the data on the computer before you continue.

  Thank you.

• Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  If your Adobe program worked before installed El Capitan and does not work after you have installed El Capitan... How is problem from Adobe?

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

  -See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

• Adobe does not recognize my password by installing the flash player, on the adobe site, I have no problem connecting

  Adobe does not recognize my password by installing the flash player, on the adobe site, I have no problem connecting

  https://forums.Adobe.com/thread/1619850

• Windows Update does not recognize that Windows Vista SP2 is NOT installed.

  I have Windows Vista x 64 with SP1 and I defined updates on automatic.  However, it does recognize that the SP2 is not installed...  I'm afraid to try to install it manually after reading all the trouble with SP2 on this site.  Could you please tell me why the updates fails to recognize the SP2 is not installed and I have to do to solve it?  I'm not a master IT person, I just want my computer to be as up-to-date as possible.

  Thanks for the advice and any help I can get.

  Hi Alamogordo,

  Welcome to Microsoft Windows forums!

  Automatic updates would have tried to install sp2 and the installation was corrupt and failed.  So it will not try to reinstall. We have to uninstall sp2 to view update history and try to download and install manually.

  1. click on Start to type windows update in the start search box and click on enter

  2. click on view history of update and uninstall sp2 (kb948465)

  3. use the below given link to download sp2 (download to your desktop)

  4 http://www.microsoft.com/downloads/details.aspx?FamilyID=891ab806-2431-4d00-afa3-99ff6f22448d & displaylang = in & displaylang = in

  Follow these methods before installing sp2

  Method 1

  Try to put your computer in clean boot mode and check if the problem persists. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  Steps to put your computer in a clean boot:

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.

  Method 2

  Run the system update tool

  System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These contradictions may be caused by various hardware failures or can be caused by software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work. The system update tool attempts to resolve these inconsistencies.

  1. open the link http://support.microsoft.com/kb/947821 scroll through Microsoft Download Center where several links under this section.

  2. first link is for 32-bit operating system and the second is 64-bit.

  3. click on the appropriate link, then run it on your computer.

  4. Once completed, try to install sp2 through automatic updates

  5. in the case of a failure to install manually

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system
  http://support.Microsoft.com/kb/947821

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  Try this and let us know the answer.

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why T-bird update does not recognize as before e-mail lists?

  The 2 latest updates of T-bird caused problems with my email. The last time, he has changed the way in which she acknowledged that e-mail lists - origin have me take more time to send messages. Update today (v. 32) now does not recognize my valid lists and are not sent to them, unless I open each list, select all addresses and then generate a message. What is going on? Thank you.

  I had the same problem, but remove the spaces in the name did the trick... OK the GUY Quit screwing with us!

• my CD dvd drive Windows Update did not recognize the discs. Keep telling me to insert disc.

  My CD-DVD drive did not recognize my discs.    I have a desktop Dell 400.  XP OPERATING SYSTEM

  Hi DanJones-009,

  ·         What is the exact error message?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• HP 15 r-031tu notebook AC do not recognize when, but battery when the costs

  Hello

  I bought this HP 15 laptop r-031tu about a month ago and I have some very strange power problems:

  1 AC plugged in, with battery - battery recharges correctly when the laptop is turned off (LED: solid orange light), but doesn't recognize is no AC when the laptop is turned on (LED: solid white light). Status icon still shows just remaining battery power as if the AC isn't there (and not the "plugged in, not load" case);

  2 AC connected, no battery - cell fuels

  3 AC unplugged with battery - laptop runs correctly on the battery (no light).

  Also, whenever I plug the AC with the laptop running on battery power, the display flashes and the HQ icon changes in "charge" for 1 second and then she goes back to battery mode.

  I tried a lot of solutions found on the forum, including the update of the BIOS, hard closed, using other adapters etc but none of these solutions work.

  Before you take this phone to the service center HP is there anything else I can try?

  Thank you!

  All tried, but failed, so I took the phone to the service center and fixed it. The answer:

  Problem was caused by something dirty inside the power supply! They cleaned for me and now the laptop is perfectly supported. Kudos for the effort tho!

• Windows does not recognize a blank disc in the DVD player.

  When you try to burn a CD and have a blank CD - R into the DVD player, I get 'Windows cannot read the disk in drive D ". I tried other discs and DVD, but it seems that Windows does not recognize a blank disc. I have another DVD drive and the same is true here as well.  I tried to update the drivers and deactivation and reactivation of readers but nothing is done. However, CDs or DVDs with the content are recognized.

  I had the same problem on Windows 7 32-bit (suspect this fix as well under Vista). After trying everything under the Sun entered Services (search for programs and files, type 'Services') and looked "Shell Hardware Detection. Found that it was disabled (not sure how he got that way). Right-click on it to get the properties. Change startup type to "Automatic", press apply then OK. Problem solved without even having to restart!

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 8 do not recognize exe files downloaded from the internet

  I bought the new machine of Tablet, and Samsung x 2 and I am trying to install the Audacity program. When I download the exe on the site it is not recognized by windows 8 and ask what program to use to open it.

  Even if I download the ZIP file is not recognize as a ZIP file

  I'm a Windows 8 with Norton Internet security on the computer.

  Help, please

  Hello

  1 did you changes to the computer before this problem?
  2 are connected to the system as an administrator?
  3 is the specific issue confined to a .exe file?
  4. are you able to open other files successfully?

  Method 1: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 3 to return the computer to a Normal startupmode.

  Check if a virus is the cause of the problem.

  Method 2: Run a virus online scan to check if any infected virus at the source of the problem.

  
  Run Microsoft Online Scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  I hope this helps. Let us know if you have other problems with Windows in the future.