Windows 7 Professional 64 bit backup problem

Similar Questions

• A backup copy of programs of productivity on a windows 7 Home premium 64-bit PC back to a new windows 7 Professional 64 bit PC?

  My task: I backed up all productivity software to a windows 7 home premium 64 - bit PC (which is currently retired) on an external hard drive. I want to use several of these programs on a new PC running windows 7 Professional 64 bit OS. I think I may have several ways to accomplish this task and seeks your advice on the following techniques.

  1. I could remove the hard drive from the old PC and use it as a second hard drive in the new PC. If I do that I must leave the operating system on the drive?

  2. can I just restore my backup to the new PC?

  3. even though I have the original program CD, license restrictions limit the number of times, some programs can be installed and activated. I have addressed the issues of licensining to several software manufacturers of my software, including shade (by PaperPort, Omnipage, etc.) and am waiting for answers.

  4. I also consider the creation of a system dual boot, but I believe that the windows 7 Home Edition premium OS should be the default OS. This change would probably cancel my warranty with HP.

  5 Please, don't limit your answers to the above ideas. I would appreciate your help or suggestions on the best way (if any) to accomplish my task.  Thank you.

  Programs don't return because there is more than one program that just running the main folder.

  When a program installs it puts the files in the Windows system folders. If these files are not present in the active operating system, they most likely will not work. Much depends on how dependent of the program is on files in system folders.

  If you have the original CD for the programs in question, re - install. Relative to the license, as long as the programs are installed and running on a single computer ONLY, there should be no problem at all...

  When you program discs, there is no point in dual-boot. Don't make life more difficult for yourself...

• ITunes on windows 7 Professional 64-bit problems

  I tried to install itunes on my new sony viao, who has windows 7 Professional (64 bit). During installation, all the icons on the laptop were converted into itunes icons and shortcuts have been also start itunes. I found all my icons to the trash. When I uninstalled itunes, they were returned to their original state

  You can post the question on the Apple forums:

  Apple - Support - Discussions: itunes
  http://discussions.Apple.com/category.jspa?categoryID=149

  Apple Discussions - using itunes for Windows
  http://discussions.Apple.com/forum.jspa?forumid=800

  Apple-Support - Discussions: Installation and update itunes for Windows
  http://discussions.Apple.com/forum.jspa?forumid=792 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 Professional 32 bit. Printer Spooler problem. Cannot print.

  I have Windows 7 Professional 32 bit. I did a clean install of Vista.

  Basically I'm not able to add a printer, because of the many errors I get.
  

  If I go to the printers-> add printer. I got the error: "Windows can't open add printer." The local print spooler service
  does not work. Please restart the spooler or restart the machine.
  Then I go to Run-> Services.msc and manually restart and 'Start' the printer spooler.

  So now the Add Printer dialog box and choose to add a local printer... There is no existing port to choose
  go and it does not create a new port. (I have to reboot and start the spooler each time before you can
  to successfully open the Add Printer dialog box). (The Printer Spooler as somehow 'stop' shortly after I 'start'.

  Go back and I try to add a network printer. I see my printer network hosted on the network drive, click on the
  printer and I select the printer begins to try to install it, but it quickly produces the error message:
  "Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or
  restart the machine.

  I have absolutely no idea what could cause this problem. And Yes, I tried the Support to call Microsoft, the rep had no idea what was causing it.
  

  And the print spooler dependencies are listed below:
  This service depends on the following system components:
  Remote procedure call

  The following system components depend on this service:
  Fax

  
  

  If any ideas why I can't print?

  Hi j8636,

  As the print spooler service stops automatically, I suggest that run you a scan for viruses/malware.
  Run a virus/malware scan and get back to us.

  Microsoft Security Essentials
  http://www.Microsoft.com/Security_Essentials/

  How to get rid of malware by Vincenzo MVP
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Kind regards
  Abdelouahab

  Microsoft Answers Support Engineer

• If there is a problem with the temperature of my system if I update to Windows 7 Professional 32 bit in HP Pavilion dv6330ea laptop?

  Hello

  Model No. - HP Pavilion dv6330ea laptop. Check out the link http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&d

  I bought my laptop in UK and I intend to improve my system Vista Home Premium 32-bit to Windows 7 Professional 32-bit.

  In some forum users have mentioned that.

  Users with nVidia graphics card should check the temperature of this device before upgrade.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  Q1] what is the minimum temperature / best should have the CPU and GPU, motherboard, HARD drive?

  Q2] is that this temperature is sufficient to upgrade to Windows 7? It will create no problems after the upgrade to Windows 7? This is the value of the temperature of my system of CPUID Hardware Monitor v1.22

  Motherboard - Quanta 30BC

  Temperatures - THR1

  Value - 46C (114 F)

  Min - 46C (114 F)

  Max - 62 (143 F)

  Inter Core Duo T2350

  Temperatures - Core 0

  Value - 41 c (105 F)

  Min - 41 c (105 F)

  Max - 64 c (147 F)

  Temperatures - Core 1

  Value - 41 c (105 F)

  Min - 41 c (105 F)

  Max - 64 c (147 F)

  Hard drive - ST9250315AS

  Temperatures - Assembly

  Value - 48 c (118 F)

  Min - 48 c (118 F)

  Max - 49 C (120 ° F)

  Temperatures - Air flow

  Value - 48 c (118 F)

  Min - 48 c (118 F)

  Max - 49 C (120 ° F)

  Please answer that will help me to decide whether to proceed with the upgrade to Windows 7 Professional or not of the HP Pavilion dv6330ea notebook PC

  I found a solution to my own post...

  Finally installed Windows 7 and noticed that the temperature is low compared to vista.
  So would like to inform all users with queries concerning questions of temperature on PC portable Hp Pavilion dv6330ea proceed with the installation of windows 7 and temperature is very low, the startup is fast, ahead of the functions that is good in windows 7 over vista.

• EXTREME slowing windows 7 professional 64-bit response time, possibly problem driver network adapter? Help, please!

  I have Windows 7 Professional 64 bit installed on a computer, I built

  Data sheet:
  Processor Intel i5 750 (stock clocked & stock cooler)
  Card mother Gigabyte GA-P55A-UD3P
  G. Skill Rip jaw DDR3 1333 RAM (standard timings)
  Western Digital 640 GB SATA HD
  Card EVGA 8800 GS SC Video
  Creative Sound Blaster Audigy SE sound card
  Powersupply Coairsair 650W
  Samsung SATA DVD writer

  My problem is, after I started and had my computer running for a significant amount of time (30 minutes to an hour), I loose full internet connectivity and the response time for any action I'm trying of the preform is from 30 seconds to 5 minutes.

  This problem occurs almost every time my computer is started for a significant amount of time, and it's extremely annoying.

  First Firefox, Google chrome, or internet Explorer stops receivers internet connectivity (because it is not sailing to any web page) but still related reports.

  (during this time and on my computer don't report any anomaly, IE CPU utilization / ram uses / temperature are amounts all acceptable)

  I usually try to close my browser (s) web, but its reports "not responding" and I cannot close or even end the process or the process tree, so it runs as a process. From there a program or a click I do I try to run either doesn't work or takes 30 seconds to 5 minutes to register if they register at all.

  Programs I all ready have running continue to run, IE Vuze, WindowsMP, Zune software, openoffice. But once that I close them I can't reopen.

  Any program I try to open starts a process in the Task Manager but it not to start a program or actually run, and I can't used to finish the tasks that do not work properly.

  If I try to shut down windows, it takes a minute or so to begin to disconnect, then he sits on the "logging" off the screen until I use the power switch to kill the system.

  I suspect that it may be a problem from my network card driver (Controller Realtek PCIe GBE Family, latest version downloaded directly from the Gigabyte website for my motherboard) because the question almost always starts when my internet stops working. However, this may be 2 combined numbers.

  I had this problem and I thought it was because of an installation of bad windows 7 so I erased the hard drive and did a complete new installation, but the problem is back!

  I changed my routers settings to give me a fixed IP address to dismiss questions here. All the other computers in my House have access the internet without interruption during my problems. And no other computer in my house has similar problems.

  I reinstalled the network once drivers without success.

  I would like to address the downturn extreme Windows 7 after half an hour or so if possible because I have other NICs lying there if the problem comes from the network card.

  I'm pretty computer savvy and I've exhausted all my ideas, so any notice are useful! Thank you

  OK, so I think that the slow issue is resolved now. I blame intel speedstep, while part of my problem is fixed.

  Internet connection problems still remain.

  I ran my computer in safe mode with network for about 2 hours. When I booted in safe mode, everything was fine, internet connetion worked on download and upload at full power. I let it sit for an hour or two in safe mode and I came back and there is no internet again, as usual. All my browsers (internet explorer, my main browser firefox and chrome) refuse to function / load anything and their work will not end in the Task Manager. The device says it all works and it (network adapter) said I have a connection, but I am squatting me on my browsers or any other uses of the Internet. This test will run on a network interface card that I installed, with drivers. I did him wrong with shooting my motherboard cable network and its software driver port. This new card gives the same result, so I think now I know that this issue has nothing to do with my physical port or its drivers.

  The only things I can think that it either now are either:
  my router
  However, all the other computers in my house (3 of them, 1 win XP), 1 Win 7 64 bit pro, 1 Ubuntu and my Xbox 360 not having this problem and works perfectly

  or

  Something inside windows 7 that control the browsers or manages connections,
  I think it's most likely due to the fact that my browsers have problems in the Task Manager / they do not work properly

  All reviews are useful,

  Thank you!

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 Professional 64 bit constantly "not responding".

  As requested by Adam - Support Engineer starts a new thread to an old unsolved problem. Windows 7 Professional 64 bit constantly freezes showing a message "no answer." The gel can last from 10 seconds to a minute about. It happens with all the applications on my system, including but not limited to: IE, Windows Explorer, Notepad, All Office 2007 Pro (MS Word, Excel, Outlook, etc.), MS Calculator, MS Solitaire, Editpad, Acrobat Reader,... I tried all of the suggestions I found that applies to my system. Nothing has worked. I reinstalled Windows at least half a dozen times.

  System Specs:
  MB - ASUS M4A79T Deluxe rev 1.02 G
  BIOS - worm 3205
  Processor - AMD Athlon (TM) II X rev 4 965 RB - Black edition C3
  Video - ATI Radeon HD 5870
  RAM - 8 G OCZ3G1600LVAM2G
  NIC - Onboard Realtek PCIe GBE Family Controller
  Sound - Onboard Realtek 1200 8 channels high definition
  HDD (SATA) - Boot - Seagate ST3100528AS
  (SATA) HARD drive - backup - Seagate ST3160812AS
  DVD - LG GSA-H55L
  DVD - LG GSA - 4163B

  I forgot to update this. If anyone is interested the problem was hardware related. Have 2 players of DVD IDE was originally the system sometimes does not detect or lose contact with one or two hard drives. I've had the same 2 DVD connected to an another MB before the upgrade and they work very well together. I changed the old to a dvd SATA and that solved a problem. Don't know if this is a bios or Windows issue. The second problem was that the video card cannot have been well installed. This MB has a foam strip along the Panel of e/s that I really had to compress in order to align the screw holes in the Mo with those in the case. This fact is difficult to insert the cards, because there is not much space for the mounting bracket slide between the Mo and the case. I had to really force to get it in. To make sure that the video card was sitting properly, I loosened the screws MB, installed the card and then tighten the screws. This also gave permission, that I need to insert a USB 3.0 card later without having to fight with him.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Qmenu button and Windows 7 Professional 64 bit operating system

  Hi guys, I installed wacom and Qmenu program but, I have a really weird problem because writing pad and screen rotation buttons are working well but the Qmenu (Q) button does not work . I installed the latest version of wacom (5.05 - 7) and Qmenu (06.50.09.01) and I use the version of windows 7 Professional 64 bit.

  I check the device by installing the 32-bit windows 7 ultimate and all the buttons worked fine.

  Any help would be appreciated

  Hi guys,.

  I discovered this morning there is a separate label for Tablet PC in the Tablet PC settings window buttons. You can reach it via Control Panel.

  In any case, I'm happy to say thank YOU to all who have tried to address this problem

• My laptop camera image on the upside after the upgrade to Windows 7 Professional 64-bit.

  I have a laptop Asus G50Vt - X 1, which is a 64-bit computer. It had Windows Vista Home Premium 64-bit installed on it and the unit worked properly with him. I ran the update of Windows 7 Advisory on this matter and he said I could upgrade to Windows 7 64 bit. After the upgrade to Windows 7 Professional 64 bit the images from the camera are all upside. I contacted Asus about the problem and they sent me the drivers updated, but the images are still upside down. Pourrait Windows 7 cause this problem as I know that it worked fine under Vista?

  I also noticed that my dvd/cd player and external hard drives don't stop the execution after that I have quit an application. When this happens, I can't eject the cd or remove the drive from the computer.

  Windows Update has nothing to do with the upgrade of Windows. Post future questions in one of these forums, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'd get treatment faster with Windows 7 Professional 32 bit I have with XP 32 bit?

  Thank you for your quick response to my previous question on the upgrade to Windows 7 Professional 64 bit.  By the Windows Upgrade Advisor, my system will be the 32-bit version of Windows 7 Professional with my current RAM. I'd still get faster with Windows 7 I have with my XP 32 bit?

  Thank you.

  Hi Carrie,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have a query related to the speed of Windows 7 32 bit.

  Yes, the processing power will increase when Windows 7 is a more recent operating system, compared to Windows XP.

  Meet us if you encounter any other Windows problem, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Anyone know how to get a new existing product key of windows XP Professional 32-bit OS?

  NECESSARY EMERGENCY ASSISTANCE PLEASE!

  Hello

  Anyone know how to get a new existing product key of windows XP Professional 32-bit OS? (my key has reached the max limit).

  Please HELP URGENTLY if youi can as I have now just 1 day left to activate (& risk losing all my work in the last days where I reformatted and reloaded all programs, etc.). Really, I don't want to not upgrade to windows 7 (already tried) until I absolutely have to also really enjoy windows xp prof os - but complete support & can't buy more then? Download the new key or extend my use of existing key?

  PLSE Help!

  Thank you

  Angie

  There is no such thing as a "max usage limit" (other than to be in use on a single computer at a time) for a Windows XP product key.

  There is no limit to the number of times where you can reinstall and activate the same license of Windows XP on the same PC.  Is never a charge.  No more than a product key (as long as it is not an evaluation license) never expire.  If it's been more than 120 days you finally turned on this specific product key, you will probably be able to activate via the Internet without problem.  If it was less, you may need to do a five minute phone call.

  Here are the facts relating to activation:

  Piracy Basics - Microsoft Product Activation
  http://www.Microsoft.com/piracy/basics/activation/

  Windows Product Activation (WPA)
  http://www.aumha.org/a/WPA.htm

• With the help of Western WD50EZRX Digitial 5 to drive on Windows 7 Professional 64 bit

  Hello

  I bought this new Western Digital Green 5 to drive as a device of storage, but somehow, Windows 7 Professional 64 bit on both my Dell Optiplex 990 (with Bios A19) and Dell Studio XPS 8100 (with Bios A05) can't see the ability beyond 561 GB (instead of 5 TB). I tried to just put it in the USB port, docking station and internally via ATA cable connection, but there is no change.

  On my Dell Optiplex 990 I even tried to change the main drive of 1 G (it's a laboratory machine in order to clean and reinstall OS) use of AHCI in the options of SATA drive in the Bios that I read, that it may be able to see the full capacity. Yet the problems I'm running into now seem to be

  1 BIOS can't even see the 5 TB drive in the Dell Optiplex 990.

  2 Windows cannot install once even in the main drive of 1 GB that I have spend fast storage by default to use AHCI.

  Please please advise on how I can use this 5 TB internal SATA drive or external drive USB in Windows 7. Thank you.

  Hi Waynewcleung,

  Please try to update the Intel RST. That is usually the case.

• Windows 7 Professional 64 Bit 1 800700 error code

  I had big problems with my system and one is the inability to download 10 major updates since 16 Oct.  The error code 800700 1 iss.

  I tried fix - it, technical support microsoft, leveno support and that you have found no solution.  I went troubleshooting and fix - it, but I keep getting the same error.

  Curious, does anyone with this problem have "sonicwall" and Apple Application support, Microsoft Silverlight or and or 268,4 of NVIDIA graphics driver?  Check under the appearance tab under control panel program.

  Also, I had a lot of problems with the power supply.  There were so many shortages.   I lived 5 motherboards and 2 graphics cards in the last 8 months.

  I hope that we can find a common denominator.

  I need help fast!

  computer laptop lenovo thinkpad w701ds/windows 7 Professional 64-bit.

  0x800700C1 is defined as ERROR_BAD_EXE_FORMAT (%1 is not a valid Win32 application) in winerror.h, the most common cause is that some program trying to mix 32-bit code and 64-bit. Lucky 10 incomplete downloads or your drive is damaged is quite small.

  If you download and install the individual KB updates (look for their number of KB to download.microsoft.com), try the steps in the "Save the Windows Update files" section at http://support.microsoft.com/kb/2509997.
  If these individual updates of KB facilities fail, then you must check the forums related to the products cited in the articles as the man to deliver is now out of the question.