Windows 7 Professional 64 bit constantly "not responding".

Similar Questions

• New installation of Windows 7 Professional 64 bit does not install the Windows updates

  I tried it twice.  I install Windows 7 Professional 64 - bit on a ThinkPad T61.  After installation and activation successful Windows, I tried Windows updates.  The 'check updates' never ends.  After the first installation of Windows, I tried all sorts of bugs found either here or other Windows Help Web sites, does not.  So I reinstalled Windows, but with the same result.

  After that the first installation was impossible to install updates, I received the Windows Update stand-alone Installer and downloaded the stand-alone files for updates.  Would install things like IE updates, but no security update would install, as well as most other updates.  Yet once, just standalone Setup would continue to search for already installed updates without ever ending.

  Does anyone have an idea how to solve this problem?

  Thanks for the comments.  It's good to hear that you have actually solved the problem.

• InDesign Server CS6 / Windows 7 Professional 64 bit: could not start the server

  Hello

  I develop plug-ins for Indesign Server CS6.

  Now, I would like to install Indesign Server CS6 on my PC with Windows 7 prof 64-bit Developer. But do not start the server.

  The message "the Application could not start correctly (0xc000007b). Click OK to close the application. "is displayed.

  -Is it possible to install the server on Windows 7 prof 64 bit?

  -If not how can I debug my plugin?

  -A work around?

  Thanks for the help.

  Kind regards

  Hans

  IESHIMS.dll indicates a problem on my system, but my msvcr100.dll seems good.

  I sent you a private message with the output of my depends on for IDS.exe (InDesignServer.dwi) you can load and compare with your own case.

  Concerning

  Caerwyn

  PS. apparently I can only attach images and videos. If you want to the CFA, send me a PM with your email and I'll send it by e-mail.

• HP EliteBook 8440p with i5 650M core and Windows 7 Professional 64 - bit is not recognize 8 GB of ram

  I had XP Professional. I installed Windows 7 64-bit and put 8 GB of RAM (2 x 4 GB DIMMS), but it only recognizes 4 GB.  Need help!

  Hello:

  What appears in the BIOS?  4 GB or 8 GB?

  If only 4 GB appears, the module of memory in the lower memory compartment is defective, or the slot on the bottom of your PC memory is faulty.

  If you have replaced any existing memory in your laptop, put it back in and see what happens - or under the keyboard to determine if this 4 GB chip is bad and 6 GB now shows upwards or downwards to see if 6 GB appears or remains at 4.

  My money is a hardware problem.

  Paul

• Remote Desktop on Windows 7 Professional 64-bit does not connect to my computer Windows XP VPN

  I recently updated from windows XP 32-bit to Windows 7 64 bit.  According to the same installation instructions, that I used on XP to connect to my computer to work through VPN & remote desktop is no longer working.  I can connect to the VPN connection without no problem, but when I use remote desktop to connect to the computer, it does not work.  I get the message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are all very well, so it must be another problem.  I also checked windows firewall remote desktop is allowed on the exceptions list.

  Any help would be greatly appreciated!

  I fixed, which was ultimately quite simple.  I changed the 3 settings, 1 - uncheck the TCP/IP v6 2 - in the options of the remote desktop, ADVANCED tab, I changed the server authentication for: connect and don't warn me.  3 - below, to connect from anywhere, settings...  I chose: do not use a remote desktop gateway server. \
  I checked the TCP/IP v6 and everything still works.
  Hope that helps someone.

• Product key for Windows XP Professional 32-bit does not?

  Hello I had to reinstall windows xp, so I downloaded a fake copy the xp installation disc so that everyhing would be legal. And if I tried to put in the product key located on the bottom of my Acer TravelMate 4070 (just to tell you I've already called support of Acer and they told me to call Microsoft, but Microsoft phone lines are closed.) that did not work. Well, so I tried to use the key that I worked with before I tried to reinstall windows xp pro (laptop came with Windows XP on it, I got the key with magic Jelllybean Keyfinder.) and it still says: invalid product id. Please help I have work I need to do and I can't keep my life on hold for too long.

  Thank you!

  EDIT: Recovery media is no longer available for the computer/serial number.

  "Geebmaster" wrote in message News: 68097bed-58ab-4316-8f4f-4a36c5835c93...

  Please try to use the Acer Recovery Media purchase program. Carey Frisch

  The recovery media is no longer available for the computer/serial number.

  You may be able to acquire the recovery disc for your PC from www.restoredisks.com
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Kodak esp3250 drivers do not install on Windows XP Professional 64-bit

  Hello

  I just want to ask if it is possible to download drivers for my Kodak ESP 3250 printer. I heard that it is not compatible with Windows XP Professional 64-bit machines, but I think that it is not true.
  Thank you
  Zuga01

  If you really have XP Pro x 64 (which is rare), you're right that current software/driver Kodak for its all-in-one printers (including the ESP 3250) will not work for your operating system.  See http://support.en.kodak.com/app/answers/detail/a_id/32108/selected/true

  It is possible that Kodak may have an older version of its software that works.  See http://support.en.kodak.com/app/answers/detail/a_id/23858/related/1/selected/true

• Brother printer driver hl-1230 parallel not recognised in Windows 7 Professional 32 bit.

  Brother printer driver hl-1230 parallel not recognised in Windows 7 Professional 32 bit. It is supported by MS and brother informed me to contact MS support, but of course MS wants MORE money for support.

  How can I get this printer working?

  * I have updated the list of printers supported in adding/Printing Assistant
  * printers only like mine is HL-1240 and HL-1250. I installed them, but it did not work. Only the white pages are out.
  * I went to Windows Update, and was the only one available update for Windows Defender
  * I have not tried all of the Vista drivers for this printer, because I don't think I would have, if MS wrote W7 is pressed it.

  [http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Brother%20HL-1230%20Laser%20Printer&v=Brother&uid=HL-1230ZU1&pf=0&pi=0&s=brother%20hl-1230&os=32-bit]

  Brother written all Brother print drivers included in the operating system as well as those on Windows Update.

  Have you already installed the drivers from Vista 5/2007 for this device since the Brother's Web site?

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/DLF/000000/003300/dlf003321.html?reg=us&c=us&lang=en&prod=hl1230_all&type2=1&OS=74&flang=4&dlid=dlf003321

  I'll send the mail for the Brother printer driver testers who are in Redmond and confirm which driver what they recommend for the device.  I do expect a response until after Jan. 4.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Could not find Realtek HD Audio version 6.0.1.7404 windows 7 Professional 64-bit

  My wife PC is a HP, win 7.1 running and it has Realtek HD Audio (version 6.0.1.7404). This version has a feature of the "SOUND EFFECTS" tab that allows you to select different sound options, such as: living room, Hall, Arena, Rock, Jazz, Live etc.

  I want this version on PC HP 'MY', (which is running Windows 7 Professional 64-bit).

  "How this work?  and ' where can I get it?

  Please keep your answers as simple and direct as possible because I'm about to lose my mind. If you knew the amount of anger, frustration and blasphemy that went into this project, you'd laugh.

  So... having to him.

  Rob R.

  Your hardware may be different from the PC to your wife, so does not support the feature. Or your drivers are not updated.

  It would be useful that you could provide us with the details of your hardware and the driver version. Use Device Manager to find it. Open Start, right click on the link to the computer , and then select Manage. Then, in the left part of the window that opens, click on Device Manager.

  According sound, video and game controllers, let us know the details of your material or post a screenshot.

• printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

  Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

  Hello

  HP Photosmart 7345 is compatible with Windows 7.

  Download the drivers for your printer from the below mentioned link and check if it helps.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997

  
  Contact HP support for further assistance.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• Hibernate not available after powercfg-h on in Windows 7 Professional 32 bit

  This is recently cleaned installation of windows 7 Professional 32 bit on my laptop HP Pavilion dv6330ea PC, had previously vista home premium 32-bit.

  I noticed that the hibernation is missing. I have run cmd as administrator and run powercfg h
  and restarted my system but always Hibernate does not appear.

  Finally, I found a solution to my own post after a long time.

  Hybrid sleep is another new feature of energy saving designed primarily for desktop computers. Hybrid sleep saves all open documents and programs in memory and on your hard disk, and then puts your computer into a low power state.

  Unlike laptops, desktops have generally not focused on backup battery power. So a power failure sudden to a desktop in standard sleep mode, you risk data loss.

  But with hybrid sleep is turned on, Windows can restore your work to your hard drive. On desktop computers, hybrid sleep is usually on by default.

  When hybrid sleep is turned on, clicking sleep automatically puts your computer into hybrid sleep. When hybrid sleep is turned off, or if your computer doesn't support hybrid sleep, clicking Sleep puts the computer to sleep.

  To enable or disable hybrid sleep:

  1. Open Power Options by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Power Options.

  2. On the select a power plan page, click on change settings for the plan under the selected plan.

  3. The parameters of change for the plan of the page, click on change advanced power settings.

  4. On the Advanced Settings tab, expand sleep, expand hybrid sleep allow and then do one of the following:

     • If you are using a mobile PC, click on battery or plugged (or both), click the arrow, and then click.

     • If you are using a desktop computer, click setting, click the arrow and then click.

  5. Click OK and then click on save changes.

• computer laptop Sony vaio S - series VPCS133GN, operating system windows 7 Professional (64 bit) genune, these days, my pen drives are not installation and opening

  I use a computer laptop sony vaio S - series VPCS133GN operating system windows 7 Professional (64 bit) genune, last few days my pen drives are not installation and opening. Kindly help me.

  Best regards

  A.C. Dutta

  Hi Johanna,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use the USB in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this

  1. you get any error message?

  2 have you tried using different USB ports?

  3. any other USB key works on the computer in question?

  4. do the USB works on any other computer?

  5 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  (a) click Startand then click Control Panel.

  (b) click system and Maintenance, click System, and then click Device Manager.

  (c) Note if the control panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  We would be more than happy to help you if the steps above did not solve the problem.

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• Can I add an additional 1 GB of RAM to upgrade my Windows XP 32 bit to Windows 7 Professional 64 bit?

  I have a gateway Windows XP with 2 RAM slots.  Originally, there were two 256 mg RAM. To increase my RAM, gateway who sent Kingston 1 GB DDR2 memory live extra.  In order to install my XP 32 bit to Windows 7 Professional 64 bit, I need 1 GB of additional RAM.  My questions are the following:

  (1) can I just install another 1 GB of RAM in the housing currently containing one of the original MGs 256 of RAM?  (2) make a DDR2 1 GB RAM module?  The instructions of Kingston show that DDR2 and DDR modules are not interchangeable.

  Thank you.

  I have a gateway Windows XP with 2 RAM slots.  Originally, there were two 256 mg RAM. To increase my RAM, gateway who sent Kingston 1 GB DDR2 memory live extra.  In order to install my XP 32 bit to Windows 7 Professional 64 bit, I need 1 GB of additional RAM.  My questions are the following:

  (1) can I just install another 1 GB of RAM in the housing currently containing one of the original MGs 256 of RAM?  (2) make a DDR2 1 GB RAM module?  The instructions of Kingston show that DDR2 and DDR modules are not interchangeable.

  Thank you.

  Read manuals for said material or contact the manufacturer of the device of said responding better material questions.  In this case you may also look here:
  http://www.crucial.com/
  Use the Advisor to memory with the brand & model of your computer to see what to buy.

  However - given what you have - I would replace the entire machine with a refurbished with Windows 7 included.

• RECENTLY I HAVE WINDOWS 7 PROFESSIONAL 64-BIT AND THAT YOU CANNOT LOAD LABTEC WEBCAM MORE.

  RECENTLY I HAVE WINDOWS 7 PROFESSIONAL 64-BIT AND THAT YOU CANNOT LOAD LABTEC WEBCAM MORE. I GET THE MESSAGE 'THIS PRODUCT NOT DESIGNED FOR YOUR OPERATING SYSTEM' I TRIED TO GO ON THE LABTEC WEB SITE AND DOWNLOAD DRIVER FROM HERE, BUT STILL WILL NOT WORK. CAN ANYONE HELP?

  Hello

  Please, do not type in capital letters as it is difficult to read and considered to be shouting.

  -----------------------------------

  As you know that there are no Windows 7 drivers for this camera. Check with the support of Labec.

  Labtec Webcam software
  http://www.Labtec.com/index.cfm/service/listing/APAC/en, crid is 68, crid2 = 1764

  Labtec support
  http://www.Labtec.com/index.cfm/service/splash/APAC/en, CRID = 3

  ----------------------------------

  You can try loading the latest driver available in Compatibility Mode which sometimes
  work however, it isn't anywhere near a sure thing.

  Exhausted all other methods in the Troubleshoot utility above before trying these.

  Logon as ADMINISTRATOR for all of them.

  You can try Compatibility Mode but this rarely works on the device drivers.

  Right click on the driver executable (.exe) file - select Compatibility Mode

  In the drop-down menu choose XP or Vista and Service Pack (if it is the version
  "you try the drivers).

  Click OK, and then let the race to see if it will install.

  =================================================

  It also rarely works on the device drivers but it is worth trying:

  Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  Open an elevated command prompt : (probably looks like this)

  C:\Windows\System32 >

  CD \the path to this folder as C:\User\Your user Name\Camera_Folder or whatever the path
  is the folder where the driver is unpacked.

  In this case it would be \User\Your User Name\Camera_Folder CD and would look at the prompt:

  CD \User\Your user Name\Camera_Folder >

  This in type at the prompt and press ENTER.

  -I - one *.inf PnPUtil

  It will take a little time to respond.

  If it does not (error) use the full path to the driver, for example (which can be used for)
  "no matter what guest):

  PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf

  Still wait to see if it will install.

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  The PnPUtil command syntax
  http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspx

  PnPUtil.exe - operating instructions
  https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">