Similar Questions

• HP Pavilion mode # 15 - n065: standby / Hibernation does not not on this laptop (model # 15 - n065) (10-window-pro, 64-bit).

  Hello

  I've updated my laptop HP for Windows - 10 - PRO EDITION (64-bit).
  
  Update went well.

  All the drivers seem to be installed device and work.

  Operating system works very well.

  I'm having a problem with sleep / Hibrernation modes.

  When I close the lid for a few seconds and then reopen the lid the laptop does not wake up.

  When the computer goes to sleep it seems to go in hibernation. Even though I disabled the hibernation in the power of the system settings.

  When I press a key on the keyboard of the laptop won't wake up.

  It will not wake up from sleep or hibernation mode.

  I need to power cycle the notebook to log in Notepad.

  My laptop (HP 15.6 "15r011dx with the baytrail-M Intel Pentium platform) works very well with Windows-10 and wake up very well to the mode sleep and extended. So, I know what present works with Windows-10.

  How can I fix?

  Do I need to install other drivers/software?

  This feature is not supported on this HP laptop?

  Thanks in advance,
  Alex

  -----------------------------------

  My hardware:

  HP Pavilion 15.6 "laptop with Intel-Core-i3 4005U haswell CPU (model # 15 - n065)
  Product # E8B13UA #ABA

  ------------------------------------

  

  Hello

  Please find the link given below might help you solve your problem.

  http://support.HP.com/us-en/document/c03383935

• Tecra M2 - standby, hibernation does not work

  I use Tecra M2 with Windows XP and Office 2003. If I try to put my cell phone in "standby" mode or "Hibernate" nothing happens... the computer remains always on. Only "disconnect" and "closing" works correct. Also do not work Fn + F3 and Fn + F4.
  Any ideas?

  Hello

  you have the Toshiba Power Saver installed? If so, you must uninstall and download the current https://eu.computers.toshiba-europe.com

  If this solution does not keep me!

  Chris

• Standby/hibernation does not work on satellite

  Click on start/stop of the computer/standby and nothing happens.

  Hibernation icons and the day before are not active just stop and cancel it.

  Can anyone help.

  Hi Colin,

  Go to the Toshiba power management option and click on the "Advanced" tab make sure that the enable hibernation support option is checked. Alternatively, if you use Microsoft power options, then click the Hibernate tab, and check that put into hibernation is enabled.

  Kind regards

• Re: Not possible to enter sleep/standby extended - standby/hibernation is not allowed now

  No matter what method I use to try to switch to Stanby or hibernation mode, a prompt indicating "standby/hibernation is not allowed now" appears.

  For example, this happens when I go through start-> shut down the computer, or when I close the lid of my computer that I put to sleep mode.

  Help, please! Thank you!

  Hello

  First of al I'd like to know what model of laptop you have.
  Then it is possible that the Hibernate mode.

  Please check the settings if Toshiba Power Saver was installed on the laptop to save energy, and then check the settings there.
  Otherwise, you must check the power Windows Option in the control panel

  See you soon

• Windows 7 auto mde sleep and hibernation does not

  Hello

  I am Windows 7 64 bit Home Premium SP1 - computer laptop ASUS K55A and automatic sleep mode / hibernation does not work.

  Please tell us what to do to fix.

  Thank you

  Lynne

  Thank you for your time and your answers...

  I ran the Microsoft Fix It and now everything seems to work very well. .  sleep/wake extended and even the screen saver is now working.

  I am a very happy customer.

  Difficulty of MS is an excellent solution - and easy to use.

  See you soon
  Lynne Carter

• iPhone 5 on/standby button does not.

  iPhone 5 on/standby button does not

  • Re: iPhone 5/sleep button does not

  Visit your Apple store or an authorized service provider and seek redress.

• mode full screen does not work when playing games, recently ive changed my os from vista to windows 7... Please help me

  Im having dell inspiron 1545 graphics Mobile Intel (r) express chipset family... I changed my os from vista to windows 7 32 bit... after the mode full screen does not work just playing games... a black bar is the view of both sides of the window... can help a whole... ???

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Download the latest driver adapter disaplay from the manufacturer's website, install on your computer and check the status of the issue.

  Inspiron 1545

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-1545

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• Satellite A200-14F - standby and hibernation does not work

  Hello
  I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

  I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

  If you have had the similar problem please write what I have to do.

  Concerning

  Hello

  > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
  After Installing Win XP, you must update the BIOS to the XP version.
  You should check the page European driver of Toshiba. There are BIOS for Win XP.

  After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

  Welcome them

• Envy 17 17 t-j000: HP Envy 17 suddenly goes into hibernation, does not beyond a certain point

  Last week my laptop has been experiencing some battery problems.

  First of all, I noticed that when he got about 25 or 30% of battery, he would suddenly mode 'sleep' (at least that is what I think it does. When I plug it in and turn it back on, the HP loading screen appears, but everything comes back to exactly how it was). Once the battery has been reduced to 1%.

  In addition, it does not load past certain percentages, which are progressively more low gretting. At the beginning it was 98%, while 93% and just 35%.  He will say that he is in charge, however.

  When I use HP Support Assistant, my battery is displayed as 'Okay '. My friend used a program that drained my battery so fast that it could (I apologize that I don't remember what this type of program is called) and I think he said that he had done in about 25 minutes, which is expected of a laptop of this age (about a year and a half).

  @Fletcher089 ,

  Please report back and that was great info by the way.  What you showed me the battery you have past, however, it is on its way. It has a dead cell and other cells are harder to provide enough oomph to keep things happy.

  You will not get a full charge of the battery at this stage, and it can disturb your hibernation systems.

  I look to see what is available for replacement or run your system without the battery and just the power until you get a new one.

  I hope this has been helpful

  I thank you again for posting.

• ORA-16086: standby database does not available? Help me

  Hi all
  I use logic ensures db,.
  my database is very well that there is an error: ORA-16086: does not log pending available files, standby database contain
  It's log_archive_dest_2 on the primary database: log_archive_dest_2 = "service = LGWR SYNC dgora SAY valid_for =(online_logfiles,primary_role) db_unique_name = dgora'"
  
  even then, oder data still are transported from primary eve db db and then applied on the eve of the database.
  I run the command: select group #, the journal of v status $; -> the result is normal.
  
  can someone help with this problem?
  
  I thank you,

  They are a bit like the pads to do it again.

  It will speed up to apply, rocking and tilting.

  Standby Redo Logs are similar to online redo logs and the difference between the two is that standby Redo Log is used to store restore data by progress coming from another (primary) database.

  Standby redo logs are used only when the database_role is in sleep mode, it is recommended to add in the primary also so that they can be used on the evolution of the role, however, in the normal course work standby redo logs will be used at all on the primary.

  Using groups of waiting for redo log depends on the rate of generation of redo, you can see only 2 newspapers roll forward pending use even if you have 4 groups of waiting for redo log, when the production of roll forward rate is lower.

  It is recommended to have a group of newspapers of recovery sleep when redo production rates are high and all of the current log roll forward pending use.

  Best regards

  mseberg

  Add correct you issue?

  Published by: mseberg on July 20, 2011 08:17

• After the closure of full concert screen in edit mode, the interface does not

  If I create a new concert, or open an existing one and I full screen it in edit mode, when I close and I'm back to the main menu, I can't interact with the interface; It does not. I can't click on anything, the menu bar does not work, the 'Choose' button flashes, but when I click it, nothing happens. The only way to get the application to work is to right click on the dock icon and click "exit". So, when I reopen it, I let the same windowed concert and close, this isn't a problem. Everyone knows this?

  I encounter the same problem on my MacBook Pro 2013.

  Version 3.2.4 (on both machines)

  I would add that if I restore the concert before closing, I don't have this problem and I can communicate normally with the menu that appears after the closing concert.

• Satellite L300 - 11G XP (Home, Poland): Hibernation does not work

  Hello
  I bought my computer without OS, I installed XP and drivers (but I could not find info on the order appropriate to the installation of drivers - y at - it all?)
  Everything works without hibernation.

  Standby power dosnt see this function
  Turning off the energy saver and turn on this option under XP (it's in the window with the screen savers - I don't know proper name) causes an error and the information that another process is using Hibernate

  Are there missing drivers?

  Darek

  Hi again,
  I'll try to ask my question in a more coherent way ;-)

  Material:
  Toshiba Satellite L300 - 11G
  Brief model number: PSLBCE-00F00EPL
  (Made 2008-05-24)

  OS: Windows XP, home edition, Polish version

  Problem:
  (1) hibernation is not present as an option
  energy saving
  (2) hibernation may not be enabled in Windows XP Power Management - communicate the resulting error says that "another process is using this function.

  Is hibernation in someone Thoshiba L300 11 G with windows XP?

  I downloaded all the necessary drivers, but I don't know if I installed them in the proper order.

  I don't know which driver is responsible for the hibernation, so I do not know which to reinstall, change or check.

  Darek

• Scan engine mode on RT does not not with EtherCAT NI 9144 chassis

  Hello

  I have problem with communication of the cRIO-9074 RT with NO 9144 via EtherCAT.
  I add the expansion with a NI 9203 module chassis to my system running on the cRIO-9074.
  I use it in engine scan mode. My PC application communicates with RT by network data stream. When I run only asks to RT, the RT is the reading of variables EtherCAT I/O chassis with no problems, but when I run the PC host application, RT probably go into configuration mode and interrupts communication with chassis EtherCAT - I can see that the LAN LED on expansion chassis stops flashing. "" Then, with still running application I click in the LabVIEW Project Explorer, the item target and select utilities ' Mode Scan Engine "pass back"Switch to active"Configuration, then it starts to communicate. I tried to do the same thing programmatically work with the Scan Engine VI Mode Set but it doesn´t so Runt-time it does not work as well.

  The behavior described above happened when I added the chassis extension in the project and only the module place entries in this chassis are affected, the rest modules 8 places directly in the cRIO-9074 work withou any problem.

  System:

  Professional Win7
  LabVIEW 2013 SP1
  OR-Industrial Communications for EtherCAT 2.7
  OR CompactRIO 13.1

  Hello

  problem solved. The reason was function RT Set Date and TIme.vi what casues on NOR-9144 error and blocked EtherCAT communication. I found that this function is no longer supported in LabVIEW. After the removal of this feature of application of RT, everything works fine.

  BR, Jan