Windows 7 Professional - impossible to pass the beta Office 07 to 2010.

Similar Questions

• You want to upgrade Windows Vista to Windows 7 Professional. I ran the Windows Upgrade Advisor, and he told me that I can upgrade to Windows 7 Home Premium and Ultimate. Why not professional?

  I want to install Windows 7 Professional.  I ran the Windows Upgrade Advisor, and he told me that I can upgrade to Windows 7 Home Premium and Ultimate. Why not professional? Or is this correct?

  You can still install Windows 7 Pro, but it requires a custom installation. This will remove all your programs (you will need to reinstall them), but you can save your files and settings to external storage before doing so.

  If you want to make a place in the upgrade you will need Home Premium or Ultimate.

  How to install Windows 7:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  What Upgrade Options are available for Windows 7?
  If you are running Windows Vista , in some cases you can proceed directly to Windows 7, and in other cases, you must perform a custom installation. The following table shows what editions of Windows Vista can be upgraded to Windows 7.

  Windows Vista Home Basic	Windows 7 Home Premium, Windows 7 Ultimate
  Windows Vista Edition Home Premium	Windows 7 Home Premium, Windows 7 Ultimate
  Windows Vista Business	Windows 7 Professional, Windows 7 Ultimate
  Windows Vista Ultimate Edition	Windows 7 Ultimate

  For more information, see upgrading from Windows Vista to Windows 7 . (http://windows.microsoft.com/upgrade-windows-vista )
  You can't go from 32 bit to 64 bit, a clean install is required. If you have any questions about the upgrade from 32 bit to 64 bit or vice versa, please see this FAQ: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
  If you have any general questions about reinstalling Windows , please see this site:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

• You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read DVDs

  You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive.  able to read other DVDs

  Hi, Virgil,.

  1. what kind of DVD are you trying to format (DVD + R or DVD + RW)?

  2. you receive messages or error codes when you try to format the drive?

  You can check if you are able to format the DVD in another computer.

  You can also read the following article and check:

  Format a CD or DVD

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• Windows 7 Professional, can I pass its default language in the other, like German?

  Hey
  I have a question on my windows 7 professional language problem.
  When I bought the laptop the default language is English. But now I want for the shift in German? How to make possible?
  I knew the Ultimate version could change language 32 at will. What about that professional?
  Any suggestion...

  Hello

  You need Windows 7 Ultimate or enterprise, change language.

  "How can I get additional display languages?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-additional-display-languages

  Note

  • Language packs are available in Windows 7 ultimate through Windows Update as optional updates. They are not installed automatically. If you are using Windows 7 Enterprise, contact your system administrator for more information about installing additional languages.

  See you soon.

• Windows 7 jumplist is absent from the beta version of Firefox 15

  I'm on the beta update channel and I think that I've recently updated to Firefox 15.0. After I run Firefox on Windows 7, I can't make it appear a jumplist so I can't pin in my taskbar.

  UPDATE: this bug has been fixed with Firefox beta 16.0. Once it was installed, I was able to pin again. Several updates since then, and always able to locate.

• My windows xp professional (home) restarts from the beginning. It repeats

  When I start windows xp professional, the screen displays windows xp, then the screen changes to ask me to start in safemode, secure with implementation network, normally known, or was last started.  And none of these work.  She does several times.

  Hello

  · What is the number and the model of the computer?

  · Will there be any changes made on the computer before the show?

  · Who is the service pack installed on the computer?

  · Have you set up the Windows XP disc?

  You can try the steps listed in the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

• How can I work around an entry password of Windows XP Professional, can I change the password?

  How can I bypass the password entry to windows xp professional?

  Hello

  Unfortunately we are unable to help bypass the passwords to reset or change a password.

  I suggest you to refer to this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  It will be useful.

• Uploaded image of Windows 7 Professional will not accept the product key that came with my computer.

  I have a Dell laptop, Studio, approximately 1 year, delivered with Windows 7 Professional installed - the label with the genuine product key is located at the bottom of the laptop. Shortly after I got it I deleted the recovery partition to make room for Linux installed next to Windows. I had problems with Windows system (mainly caused by me bad installation software and drivers without proper backups) so I decided to reinstall Windows. I had already deleted the recovery partition and wouldn't use it anyway because I prefer a clean system without unwanted from the manufacturer in this regard. I did not receive a Windows operating system installation DVD with my computer, so I downloaded a (64-bit Windows 7 Professional, the same as the original operating system) which already had SP1 on it (the version of Win7Pro installed Dell's not SP1). I installed Windows on this drive and attempted to activate using the product key that came with my computer, but it would not accept the key. I don't have time to try to solve this problem, but now the period of one month is up and my computer does not work correctly.
  I suspect that the problem may be due to me using the SP1 disc. If this is the case, should I reinstall Windows again? I have * NOT * GOING to buy another product key when I have already paid for a genuine version of Windows. I just want to be able to use my computer without the ridiculous slowdowns caused by pre-installed software and the way I chose.

  Thanks for any help with this problem, I really need fo fix my computer.

  original title: Activation error, Windows 7 Professional
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  Windows license Type: OEM SLP

  The key to your report is your OEM SLP key which can not be activated. This isn't the key to COA.

  but the key I tried to use is what I copied on the COA the day I got the computer of the book where I put all the information on my computers.
  
  
  Is the product key in your book is the partial key in your report?
  You must change the product key to the one on your COA.
  Check your compartment of the COA.
  The other solution is to reinstall your Dell OEM recovery disks or recovery partition. This self will activate your computer.
  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Downgraded Acer Aspire V3 575 G for windows 7, but impossible to install the wifi driver

  Hi, I got a new laptop yesterday, the model is Acer Aspire V3 575 G 73ZZ. I didn't like the 10 preinstalled with windows so I installed a new copy of windows 7 on it. However, once the installation is complete, none of my drivers work. I went looking for the drivers for my model, but they were all for windows 10 and were not compatible with my laptop. I tried to install the drivers wifi during the night, but none of them work on my laptop.

  Does anyone know what wifi Drivers to install so it can run on windows 7?

  I found the solution to my problem! I did a search on acer and discovered that my device is using Win Driver Atheros Wireless LAN (NFA344) 10 64-bit, so I did a search on Google to find the version of Win 7 64 bit for the driver and came across this page: http://support.lenovo.com/sg/en/downloads/ds105865

  Even if the driver is Lenovo, but I ran on my Acer Aspire V3 575 G and it worked perfectly. I am able to connect to the wifi now!

• I just did a clean install on the same pc (windows 7 professional 64-bit) with the same key, but it says its invalid?

  As it says in the title I did a clean install on the same pc and this time when I try and its saying its invalid key product keys?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  --------------

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I have the new Windows 7 computer. Also have the HP office jet 5510 printer range. Printer does everything except printing color photos.

  Windows 7 Professional Dell computer. HP Office jet 5510 printer all-in-one. Just had to plug in printer for it to work because the drivers are automated by Dell and HP.

  Printer does everything but images printing color. Pics. out in black and white. I think I tried everything. This has happened since the new computer.

  Nothing to do with the printer that used to be useful on the old computer is left as the amount of ink etc. I printed everything in color. It's just the pictures.

  Hope this is enough information. Thank you. Muriel

  Origonally you posted this Q 13 and it came true.

  You have not installed according to the instructions of HP, but simply pluged in there. Follow the link to HP on the previous answer and install the device properly

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/HP-OfficeJet-5510-will-not-print-color-pics-on-my/e87896f1-53e1-443B-aa08-7c297e8e1259

• Pavilion G6 2210us + Windows 7/64: impossible to adjust the screen backlight intensity

  I replaced unacceptable Windows 8 on Pavilion G6 computer 2210uS laptop with Windows 7 (64-bit). PROBLEM - I can not adjust the intensity of the backlight display (Fn keys assigned to the change of backlight do not work, they worked in Windows 8). The screen backlight is still full intensity. HP Driver web page does not include some drivers and applications for this laptop, however, I was able to locate the missing drivers on the web sites of chipset of the seller, so the Device Manager shows all devices running and the machine works otherwise OK. What additional pilot program is necessary to enable the keyboard command change the intensity of the backlight screen? Thank you.

  No, it is not normal.

  You tell me that you didn't have the video driver installed correctly.

  Perhaps this is indeed the issue.

  Try the HP Windows 7 driver for your video card and see if it works better.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-107649-1&mode=4&IDX=1&prodTypeId=321957&prodSeriesId=3688868

• Impossible to pass the version staged in the room

  I have Vista Home Premium on my Sony laptop. Support will soon cease. I bought Office 365 to install Office on this and other computers. I need to upgrade to Windows 7 or 8, (Office 365 is not not compatible with vista,) but you have to use 7 due to working software. Try the upgrade, I get the error message that the staged version cannot be upgraded to a version not stadifiée and the upgrade fails.

  Any help gratefully received.

  You happen to have access to MSDN or TechNet? If so, make sure that you do not download a controlled version, those who cannot be used to do in place upgrades of commercial versions of Windows.

  Upgrade to Windows 7 from the following operating systems is not supported:

  ·      RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS

  ·      Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2

  ·      Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.

  ·      Place of cross-language upgrades (for example, en - us en - us) are not supported.

  ·      Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.

  ·      Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.

  ·      Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.

  ·      Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.
  For more details, see the link http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

• Impossible to pass the numbers or iWorks

  somehow, I lost my iMac iWorks.  I reinstalled the original version.  Always impossible to open my files.  I'm trying to upgrade, but nothing happens.

  Hi Mike,.

  What "original version" numbers you have reinstalled? How you don't have reinstall it?

  What version you are trying to upgrade to?

  Kind regards

  Barry