Windows 7 SP1 won't install; computer crashes.

Similar Questions

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Vista SP1 - won't install not gets as much as 37056/89805

  Vista SP1 won't install - gets as much as 37056/89805

  (! 0xc01a001d! 37056/89805 (\Registry\)
  Machine\Components\DerivedData...)

  then it just stays there

  I have Vista Home Premium (Samsung R60 Plus laptop) and plenty of space to install anything

  Hi Rita,.

  If you can't follow any step of the wire, please let us know so that we can make is easier for you.

  Happy! We could help.

  Mohan

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 SP1 will not install. Element is not found, the error not found (0 x 80070490) 490

  I'm running Windows 7 64.  I tried to use Windows Update and received this message: element not found, not found error (0 x 80070490).  Code 490 Windows Update encountered an unknown error.  I tried all of the troubleshooting, difficulty, burning the .iso (which worked great on my laptop running Win 7 32) and I tried a repair, nothing works.  Any ideas or should I just not worry about installing SP1?

  Steve

  All,

  If all the above steps give no results, the next logical step is to perform an InPlace upgrade.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yes to accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  See you soon

• Windows 7 SP1 failed to install - 0X800736B3

  Any help would be greatly appreciated, I prefer not having to do a fresh install of Windows just to apply the SP1 update successfully, but here's a summary of what I tried to do so far:

  Attempt of Actions:
  (1) Windows Update - failure installing SP1 (0x800736B3)
  (2) installation of Microsoft Download Center (MDC) - failed

  Windows6. 1 - KB976932 - X 64 .exe - failed
  0X800736B3 ERROR_SXS_ASSEMBLY_NOT_FOUND
  The referenced assembly is not installed on your system.

  (3) installation of Microsoft Download Center - failed

  7601.17514.101119 - 1850_Update_Sp_Wave1 - GRMSP1.1_DVD. ISO - failed
  0X800736B3 ERROR_SXS_ASSEMBLY_NOT_FOUND
  The referenced assembly is not installed on your system.

  (4) disabled software anti-virus and convenience store update Windows performed via the Control Panel - has no

  Message received that error is corrected and reattempt to installation of Windows Update - failure (0x800736B3)

  (5) properly installed update tool of the system for Windows 7 for x 64-based systems (KB947821) [February 2011]

  Tried to install SP1 via Windows Update - failed (0x800736B3)
  Tried to install the SP1 package MDC - failed (0x800736B3)

  (6) restarted with only the system Windows drivers via Misconfig - has no

  Tried to install SP1 via Windows Update - failed (0x800736B3)
  Returned to install SP1 package MDC - failed (0x800736B3)

  (7) Installation of SP1 package MDC SafeMode - failed (0x800736B3)

  0X800736B3 ERROR_SXS_ASSEMBLY_NOT_FOUND
  The referenced assembly is not installed on your system.

  Solutions suggested to try:
  (8) run sfc/scannow
  (9) run Windows repair from the Installation CD
  (10)...
  (11)...
  (12)...

  Hardware specifications
  Processor: Intel Core i7-950 4.0 GHz (167 X 23/24 - TB & HT @ 1.312V)
  Primary GPU: Palit GeForce GTX 460 2 GB (1800/825/3600 @ 0.9 V) - 266.58
  Secondary GPU: Palit GeForce GTX 460 2 GB
  Tertiary GPU: Palit GTX 450 1 GB (783/1566/3608 @ 0.9 V)
  Memory: 12 GB A-data (2GBX3) DDR3/1600 MHz (1333-167 X 8 @ 1.81V 7-7-7-20)
  Motherboard: GigaByte GA-X58A-UD3R (Rev. 2.0 - FE1)
  PSU: Corsair HX1000W
  Hard drives: 1X1TB SATA III 6.0 GB/s (WD1002FAEX) and 2x1To II SATA 3.0 GB/s (WD1001FALS)
  Case: Azza Hurrican 2000 Full Tower
  Processor cooling: 570 LX Asetek liquid cooling w / 240mm radiator push-pull Configuration (40 c/70 ° C)
  Optical drive: Lite-On burner 24 x DVD
  OS: Windows 7 Professional 64 bit

  Information on the end:
  More detailed information some Windows updates had similar problems, which were resolved to install the Windows fix or installation after reboot with only system drivers. But this time non-joy, I hope someone here can suggest other possible solutions, I may have missed.

  Attempts to update:
  (8) run sfc/scannow

  After running Diagnostics, the log contains a series of mistakes which the diagnosis has not been able to fix, rather than take the time to identify and attempt to fix every error in topic, I chose to start with a clean slate.

  (9) new Windows installation - success

• How to deal with error code 0 x 643 ('NET Framework 1.1 on Windows XP' installation won, t install automatically and now what?)

  Problem is indicated in the title. What now?

  You mean install an Update for .NET Framework 1.1... KB2833941? If so, try this...

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If this does not fix it try this...

  Uninstall the .NET Framework 1.1.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941

• Windows vista SP1 failed to install about 50 times Error 80070002

  My windows vista service pack 1 did not install.  Error 80070002... Windows tried as an automatic update, and I tried to install manually from windows... I don't know what to do to have it installed.

  • Windows Update Error 80070002
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
  • Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
    http://support.Microsoft.com/kb/956698
  • Description of the update of the system for Windows Vista tool
    http://support.Microsoft.com/kb/947821
    0 X 80070002 ERROR_FILE_NOT_FOUND
  • You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
    http://support.Microsoft.com/kb/910336

• My computer crashes as soon as I log on Windows.

  Hello. Every time I open Windows 7, Windows Aero off suddenly and my computer crashes very easily, easily which means that shortly after I click on a few things or type stuff in, and when one thing goes down, everything else done including the taskbar. What happened 2 days while I was watching a video, and I noticed the noise started going nuts. Later, I tried to uninstall a software included with my new camera, successful Arcsoft. Then I tried to uninstall something weird anime that I've never seen before, and then he said "You have already uninstalled this program.", and then he disappeared. When I refreshed, all programs have disappeared! To avoid this, I reinstalled Windows 7, and then he started crashing non-stop. Please help me.

  PS: I did a scan of virus with Avast! and Windows Defender, no viruses. I also tried the memory diagnostics.

  PSS: I posted this in SafeMode with network.

  Hello

  Use the other methods here and startup repair to see if you can access more and then
  Use the methods in my my 1st answer above and don't forget to launch SFC and CheckDisk. Also you
  can try a repair Installation.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Repeated installation of Windows Vista SP1 in Windows Update and fake notification of successful Installation.

  I was using Windows Vista Home Basic 32 bit OS in my Dell Inspiron 1501. The operating system is preinstalled and Windows Update updated to SP2. But recently an unknown problem has occurred and my laptop cannot connect to the internet. As no reason was found, experts have advised the reinstallation of Windows Vista. I reinstalled Vista by running the operating system provided by Dell with my laptop DVD. The laptop started to connect to the internet normally.

  I started to receive an update to Windows Vista SP1. I installed it. Installation has suddenly didn't have that about five minutes and the computer also has not restarted several times on its own as expected. At the end of the Windows Update notification "Update" successful installation Update history shows also succeed installing SP1. However, I am receiving the same updated daily and installed in exactly in the same way with the same result. After installation, the Windows version does not display Windows Vista Home Basic SP1 but only Windows Vista Home Basic. What should I do?

  I had the same problem and it really irritated me. Even when you install SP1, and he says there are successful (takes like 1 sec inst) and you click on updates search is there once again. He said in the story who is has been installed, but is not there, when I tried to install SP2 maually it is said first install SP1, and then I tried to manually install SP1 and it says that I have already. But if you go to start > right click on 'computer' > properties it does not say you have SP1. So here's what I just did and now it worked and SP2 as well.

  When you click on the support link that he gave u get the ability to run a thing 'fixit '. That run. And it still didn't work. (read everything in the support page) Then I went on this link and ran the virus Hunter MS. Nothing was found, problem still there. so I ran again the file 'fixit '. (twice he said them that something was fixed.) then I restart my computer and tried to install the SP1 Setup again and it worked perfectly :) then SP2 and it worked as well manually. and he has actally took like an hour to install. maybe try, worked for me. lol, don't know what measures was unnecessary, but it worked. You can download the SP to install it manually, simply google "manually install SP1/2 for vista" or something and download it.
  Sorry for the bad grammar/spelling. In a hurry, lol. I hope that you manage!
  (if the link does not IE - http://www.microsoft.com/security/scanner/ )

• Update that installs get Windows 10 app Windows 8.1 and Windows 7 SP1 KB3035583 is NOT hidden

  Hello

  I have Windows 7 SP1, and because my computer is a netbook (small laptop) with only 2 GB maximum installable RAM, I don't want to upgrade to Windows 10.

  Nor do I want to find that I have any nagging application on my computer, which I find I become obliged often to answer, in order to re - hide the app.

  I have therefore configured as Windows Update settings:

  'Check for updates but let me choose whether to download and install them '

  I then "Hid" update KB3035583,

  and also confirmed that he had been placed in the: dialog "restore hidden Updates.

  I haven't used the system restore from the cache to update KB3035583,

  Yet it often reappears in the list of the optional updates available for installation,

  and then I have to hide it again!

  When KB3035583 reappears in the list of the optional updates, it also is more listed in the dialog box "restore hidden Updates", yet the other updates that I've previously hidden, remain in this dialog box.

  This problem only seems to affect KB3035583.

  This problem is normal?

  Any correction is likely?

  Is there a way to fix this?

  I hope to hear from anyone with a solution.

  Kind regards

  Ray333

  When KB3035583 reappears in the list of the optional updates, it also is more listed in the dialog box "restore hidden Updates", yet the other updates that I've previously hidden, remain in this dialog box.

  This problem only seems to affect KB3035583.

  Because updates automatically a mask itself as soon as MS Review and install a more recent version. I suggest to use use GWX Panel - ultimate Outsider to remove windows 10 messages.

• Computer crashes when the internet connection is detected

  Hello

  Need help with my dads pc, it is running Windows XP SP2 with IE7, the computer crashes as soon as an internet connection is detected, I have to remove the usb adapter WiFi to regain control of his PC, we use a model Linksy Cisco Modem ADSL2 + Daul-Band Wireless - N WAG320N, which is used for a certain number of laptops xbox and ps3 with no problems whatsoever.

  The system works very well without any problem until what the internet is detected and you must reset the computer of the tower base, we have tried a number of different usb adapters and a pci card but have the same result, a computer from freezing. I tried a number of different articles of this site, but all have failed, so it's my call for help to get my dads pc back on the internet, if I could get answers to the English plan as im not as good as I used to work on these systems.

  Help, please

  Kind regards

  Phil

  Hi Phil,

  1 have you made changes to your computer recently?

  2. you receive an error message when you try to connect to the Internet?

  3. what happens when you try to connect to the Internet by cable?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode with network.

  To use a safe mode with network option, follow these steps:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) use the arrow keys to choose Safe mode with networking in the Windows Advanced Options menu appears, and press ENTER.

  Step 2: PEd a clean boot and then check to see if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state

  to start your computer normally.

  Method 2: Update the network adapter and check if it helps.

  Updated a hardware driver that is not working properly

  Note: This link is applicable for Windows XP.

• HP help and support after Windows 7 SP1 update

  HP DV7-3079wm notebook running Windows 7 home Premium

  When I arrived to start and help, we help HP & support.  After that update Windows 7 SP1 has been installed the HP help & support is not there.  Is Windows help there in its place.  Does anyone have ideas how I can ger the back version of HP?

  Thanks to 200 tons

  200ton wrote:

  HP DV7-3079wm notebook running Windows 7 home Premium

  When I arrived to start and help, we help HP & support.  After that update Windows 7 SP1 has been installed the HP help & support is not there.  Is Windows help there in its place.  Does anyone have ideas how I can ger the back version of HP?

  Thanks to 200 tons

  Found the fix.  After trying to simply restore, (no restore points not listed a while ago).  The fix was to reinstall HP Support Assistant of the SW installation folder and restart. Problem solved.

  200 tons

• Where can I find the Windows XP SP1 Hot difficulty KB822603 update and how I install it on a computer without internet access?

  I'm trying to set up a wireless connection to a desktop computer with a wireless card. It is however that requires an update for Windows XP SP1 hot KB822603 of difficulty. I looked on the microsoft Web site and that you find it. So, I tried simply update service pack 1 by putting it on a disk and download on the desktop. However, it still requires access to the internet, which I did not (hence the reason for the wireless card). Any suggestions?

  A friend to download the file here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=733dd867-56a0-4956-b7fe-e85b688b7f86

  Burn it to a CD and use the CD to install on your computer.

  J W Stuart: http://www.pagestart.com

• I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  You need a disk FULL/license to do a clean install, not an upgrade license.

  Take it back to Wal-Mart and see if you can exchange it.

  See you soon. Mick Murphy - Microsoft partner

• How to install Windows 7 on my USB flash drive, just in case my computer crashes and I have to re - install?

  How to install windows 7 on my usb flash drive just incase my computer crashes and need to refurbish? can someone help me please?

  original title: help!

  Windows 7 does not support installation on external storage such as a USB Flash drive devices. You can back up your installation of Windows 7 on a hard drive external that you can restore in case your system becomes unstable. Please see the following for instructions on how to use the Image of the system:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  You have to an external hard drive.