Windows 7 Starter is to Charge not

Similar Questions

• Explorer.exe freezes when Windows XP starts. Programs do not run but clickable.

  Start Windows XP.
  Click on I want to open an account.
  Type password.
  Windows desktop with icons appears.

  Start a hourglass when scrolling on her menu.
  Frozen, you won't fix.

  The Task Manager, end Explorer.exe
  Run Explorer.exe
  Freezes again but clickable for 2 seconds.

  All icons on the desktop clickable and says they are running but does not actually open.

  PC works fine in SafeMode w / networking.

  Help please,
  PC Professional, accounting files needed!
  SOS!

  The fact that your system works well in Safe Mode (w / network) indicates that a program run as part of your startup that causes this condition.  Safe mode is nothing else than Windows running with a bare minimum of programs and processes required to start your system (that is, all non-essential is cut off).

  This problem will be a proposal of chance.  You need start your computer Safe Mode and run a configuration manager (msconfig or autoruns) and disable programs that run automatically at startup, until you find the (s) which is causing your problem in a selective way.  First turn off non-Microsoft and programs that extend if necessary MS programs.  These programs will warn you generally if you try to disable something you shouldn't.  After you turn off some of them, you restart normally and see if the problem persists.  Once you find the program/process disturbed, the procedure is usually obvious as to the difficulty (usually UN-installing then re - install)
      
  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  Procedure using "msconfig".
  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW

• Windows 7 Starter accepting not product key

  I have a laptop with Windows 7 Starter and he does not accept the 25-digit product key when i ' v tried so many times to enter. I need the facilities of Word etc now, while I "ve been done without him.  Suggestions, it was like that again and I have purchased from a reputable retailer?

  I guess you try to enter the product key found on your computer in the activation for WORD Wizard?
  If you READ the label, you will see that it is for WINDOWS, no WORD.
  You are unable to activate Office with a WINDOWS product key.
  To use any component of Microsoft Office, you will need to pick up a copy.

• Remote control does not not in Windows 7 Starter

  Hi all

  We have an application that can be controlled via the remote control. It works fine in Windows XP PC. But when I try to access the same by opening Internet Explorer on a PC running Windows 7 Starter OS, I only get the "download 0.00% of 0 bytes'. I disabled Windows Firewall and there is no software antivirus also. What could be the reason for this? How could I solve this problem?

  Thanks in advance,

  Luxama

  The system that had the problem was a netbook comes with Windows 7 Starter. We recently discovered that there are some parental control utilities in the netbook that has prevented the LabVIEW remote command access. We were not aware of his presence, and he had not shown any indication that he had blocked communication remote panel. We have uninstalled this utility & remote control began to work as expected. Thanks again for your help.

• When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  It is a message from the BIOS. You can press F2 and go into BIOS and select "set as default" then save and exit. The PC actually has a floppy drive?

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• HP Mini 110 windows 7 starter edition will not be upgraded to windows anytime

  Help! Can't get my HP Mini110 of windows 7 starter edition Home Premium. Got the key, but it is said that this key is not compatible with current windows and cannot be downloaded. What does that mean? How can I download and install this upgrade? I paid for it.

  Probably means that you have a copy of Windows 7 32 bit installed on your computer and you are trying to download and install a 64 bit version of Windows 7.

  You can't do an anytime upgrade from 32-bit to 64-bit. New ball game. Requires installation not an anytime upgrade.

• WINDOWS XP STARTS TO LOAD. STOPS LOADING AND VERTICAL LINES APPEAR ON THE MONITOR. LAST DAYS ONLY. CAN NOT USE COMPUTER.

  WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

  WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

  =================================
  Looks like you may have a type of material
  failure, but the following article may be worth a visit:

  (307852) how to start your computer using the
  the last known good Configuration feature
  Windows XP
  http://support.Microsoft.com/kb/307852/en-us

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: RunDLLEntry It just started and I have not installed anything new.

  I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.

  Hello Lscherr,

  Thank you for your message.  To clarify, you are able to print out your design program?  You can try to perform a clean boot and printing of your design program.  A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality.  If you are able to print, the problem may be caused by another application of part 3.  Click HERE for instructions to boot.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I can't advocate for windows to start. Have uninstalled and not reinstalled no difference. Error OX 800106ba. Can someone help me please?

  Sorry I'm new.  I accidentally deleted windows Defender. So I tried to install just that - it did not work, so I uninstall and then reinstalled and it still does not work.  I'm a great Grandma with no. kids to help hope someone can - thank you.

  Hello

  Here is the Vista Forums.

  If you have uninstalled then reinstalled Defender using Vista.

  Defender is part of the Vista operating system.

  Read this information on the Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• My key Windows VistaTM Starter will not work

  My laptop was bought after 3 years... and now I'm fighting through activation problems.

  When it is freshly installed by my uncle (in fact it has just changed), a technician was there to set up our component; He saw my notebook and asked if he wants me to degrade to XP because Vista is slow... since I'm naïve at this point, I just said yes, not knowing that my uncle made a lot of changes to the laptop.
  For about 1 year, I went through different reformat (after degradation 1 time, I asked him to update back); up to 1 times my license key has stopped working. It's a key Windows VistaTM Starter legitimate , I asked some elderly parents w / knowledge to my problem and said it could be that someone stole my key.
  I said 'No' because the key is known only to me and to the technician. I don't know if it uses it or what, but I can't activate it.
  My laptop does not now, and he's going to need someone to fix soon... but here is some information that might help:
  • I have the media recovery disk, all the stuff for Windows Vista and the LG drive (where you can install display, sound drivers etc..).
  • The laptop model is LG RD405.
  I hope someone could help me. PS; the call of my country cost much so I can't take the phone option especially since I have a bit in hearing deficit... and my position is on the Philippines.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• sound does not play when windows vista starts or stop

  sound does not play when windows vista starts or stop

  Hello

  • When the issue started?
  • Will there be any changes made prior to this issue?
  • Otherwise, the sound works well?

  Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
  ' http://support.microsoft.com/kb/321735 '.

  Step 2: To change the sound on closing down.

  Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.

  b. the sounds tab and then, in the list programs, select the event you want to change the sound.

  c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.

  'Change the sounds of the computer '.
  ": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I dropped my laptop and now windows starts too slowly or not at all, except in safe mode.

  Hi people out there

  I dropped my phone a few days ago and now Windows, when started normally, goes ridiculously slow and then stops before he installed the sidebar.

  It still works in safe mode with networking and the other.  Then one of my friends suggested I just get my vista disk and re-install/repair windows.  However, I am currently in Poland, and my drive is in Scotland.  Is there a way I can solve these problems with my windows?  Can I borrow a disc from a friend?  I am really attached to money at the moment then, really, to take it to a store is very much a last resort.

  Can anyone offer some (very basic please) advice on what to do?

  Thank you

  Cardno85

  You can also have problems of material thanks to a fall!

  See if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner