Windows 7 Ultimate does not show wallpaper after update in Vista Business

Similar Questions

• Windows 7 Ultimate does not recognize the Tungsten E2

  After that I've upgraded to Windows 7 Ultimate, Windows does not recognize my Tunsten E2 cable into the USB port.  I went to Device Manager to search for a triangle in order to use Aceeca.  However, there is no triangle.

  I tried using a USB key into the USB port and it worked perfectly.  However, when I tried my cable of tungsten, it's as if nothing happened in the USB port.  No recognition by Windows at all.

  Any viable solution would be much appreciated.

  Thank you.

  Hi WyreNut,

  FYI: I got it working.  However, there are a few things that had to be done.

  1. clean unlock it.

  2. go to regedit and make sure that all records of palm have disappeared.

  3. after cleaning regedit, I cleaned the registry again.

  4. disconnected from the USB port.

  5. restarted my computer.

  6. USB connection back into the port.

  7. follow the signs to Aceeca.

  8. everything works.

  Have a great week.

• Windows XP Pro does not correctly load after the release of the Radeon graphics driver

  Hello

  I have a Shuttle XPC with Windows XP Pro and an ATI Radeon Sapphire graphics card. The entire system is 5-6 years, if that helps my raw description.

  My graphic card Radeon has had performance problems, so I downloaded ATI "autodetect tool" and he did choose the update of the driver concerned. After installation and reboot, my PC load Windows XP, but remains unused in ' grainy 8 colors low resolution version ' of my office. No icons, toolbar or whatever it is well visible. The mouse moves the pointer autour, but does not respond to clicks. The only combination of keys which gives anything is Ctrl + Alt + Delete, raise the usual options (in this case useless) to lock the computer, close the session, stop etc.

  In short, it seems that I'm not really on my desk, even if it loaded my wallpaper by default.

  'Safe mode' or "last working configuration" does not take me anywhere useful.

  How to contact with the system to at least start to change my settings for graphics cards?

  I thank very you much for any help.

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Windows Live Calendar does not show daily events

  Original title: calendar does not display the daily events

  Windows live calendar shows only a small icon on Sunday.  The events are listed in the details, but he no longer appear on every day.  Tried rebooting, see more, etc.  How can I get the events to show every day again?

  Hi juliemortimer,

  For more specialist on this question help, post your query on the Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/product.aspx?productid=15

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!

• Creating cloud App does not show the last updated on After Effects

  1. Works on Mac OS X 10.9, German
  2. New CC installed again. German as default language
  3. Applications are displayed in the form of updates, no more than left.
  4. Start after effects CC, he tells me that I am using AE 12.0 CC and that this version is not running.
  5. I go to the download page for Adobe for upgrades http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=5675 & starts = 5686
  6. There is a newer version of AE

  Why the CC application not shows any upgrade to After Effects, even if it's the only way to run this program on Maverick?

  Hi Mrs. Willi Adelberger,

  Please see the Ko: http://helpx.adobe.com/after-effects/kb/effects-launch-mac-os-109.html.

  Kind regards

  Romit SInha

• Windows Update does not work for five updates to Vista x 64.

  Updates are identified as KB2378111 KB967723, KB235886, KB970430, KB972145.  I am running Vista Ultimate Edition with service pack 2.  Whenever I tried to load updates 'failure '.  This happens on a daily basis.  The error code is 80070490.  Assuming that these updates are important, what should I do to load?  Assuming that these updates are not important, what should I do to "erase" the queue of the Windows Update?

  ERROR_NOT_FOUND 80070490
  Windows could not search for new updates

  Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2 under the resolution on this page - see
  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Don't forget to download and record the version of readiness (CheckSUR) system update tool corresponding to your system architecture.
  If you don't know what it is, click on the link under "If you are not sure which edition of Windows is installed, follow these steps:"for "
  Method 2: download the update directly system preparation tool from Microsoft Download Center .

  Once the download is complete, configure the computer to start in minimum mode - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  Restart the clean boot state and run CheckSUR with the system connected to the internet, you will need to download files.

  NOTE: in the Clean boot state all the 3rd party firewall will be disabled.
  Click on the round to start, in the Start Search field type in the firewall.
  Click on the link to the State of the firewall Check to verify that the native now on Vista firewall.

  After that end run CheckSUR, cancel the clean boot procedure, and then restart.
  If a 3rd party firewall is used, ensure that it is now and the native Vista firewall isnot.
  See if the system can update now.

  If it still cannot be updated, please post the contents of one of the newspapers that CheckSUR created when he ran.
  They are in

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheclSUR.persist.log

  And, please copy & paste lines for 50 or so of WindowsUpdate.log as well as one of the CheckSUR newspapers, too.
  How to read the Windowsupdate.log file

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Windows Media Player does not allow me to update track information

  I have Windows Media Player 12 on Windows 8 running and when I try to update the titles of songs, artists, genre, etc.  updates do not change the actual files.  I tried everything I found previous discussions and it has not solved the problem.

  What I've done

  (1) run the Windows media player troubleshooting library and search for the question - when I run the utility troubleshooting that indicates that the database is corrupted and one erases / reconstructions it however the problem persists once the database is rebuilt.

  (2) disable and enable Windows media player using the features Windows power solution - no change to my question.

  (3) run the fixit from following link: Fix Windows Media Player videos and other media or from the library - this tool is not available for Windows 8

  (4) running %LOCALAPPDATA%\Microsoft\Media Player and then deleting all files, forcing Media Player to rebuild - worked for a very short time and then the same question. When I tried this fix the 2nd no time no change, I can't update the portion of my files.

  It's everything I could possibly find it please someone help me!

  Hi Jessica,.

  As with any database, the information that is stored in the database or the database itself can be damaged. The Windows Media Player library database can usually recover automatically from the database. However, the database may be corrupted in such a way that Windows Media Player is unable to recover the database.

  a. press the Windows key + run , type %LOCALAPPDATA%\Microsoft\Media Player , and then click OK .
  b.Select allfiles in the folder and then clickdelete on the file menu.

  Note You don't have to remove the folders that are in this folder.

  c.restart Windows Media Player.

       Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files . To do this, follow these steps:

  # If you are runningWindows 8/8.1, press Windows key + run, type %LOCALAPPDATA%\Microsoft and then click on OK.

  # Select thefolder Media Player and then click delete on the file menu.

  # Restart Windows Media Player .

  Note Windows Media Player automatically rebuilds the database.

• PS 6 13.01x64 does not show 13.06 update

  I have PS 6 license perpetual worm 13.01x64. I think the latest version is 13.06, but I do not see in help > updates window. I was wondering why I do not see updates and if it is safe for me to download and install the latest update manually. (If it's important, Creative Cloud application displays installed and registered as a previous Version of Photoshop).

  In fact I see good latest version for Windows is 13.0.1.3 that I have.

• Uninstall does not work for system update in Vista

  I use the uninstall feature, try to uninstall a download called system development.  Windows says the uninstall capability for development of the system has stopped working because a component is missing and I get a pop up every 2 or 3 minutes that says "update system stopped working.  How can I get rid of this from my computer?

  Hello

  Download and try the program revouninstaller FREE to remove it

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  also to run a scan for malware on your machine

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 7 ultimate does not legitimate after reinstall thanks to wubi install linux

  What happened to my wife for laptop and my office together using win7 ultimate OEM. I made the mistake to install Kubuntu usin a live CD and the WUBI Installer. This changed the MBR victory and I couldn't boot into windows. I have physically deleted the drives and connected them via an adapter ub for a PC using a locator of recovered product keys the code and work.
  I formatted the drive and the reinstalld win 7, but after a few days the key was not accepted. That computers were purchased with win7 preinstalled, I have no CD to install only a recovery CD. I have another DVD from a previous PC OEM that is 'dead' that I could use to install and I know that ago iso is available for download, but as long as I can't get the ID oem accepted I'm stuck.
  Brian
  PS I tried help already online but to no avail

  I finally spoke to someone at microsoft, the Office was purchased with win7 oem someone who built and repaired PC, on my PC, there is no sticker with the 'Product Code' ' but of course, as the PC has worked for 2 or 3 years, it came to activate the license, is it possible to find that back of the registry?

  Otherwise, I am probably 450 euro pocket for 2 new DVDs!

  Hi Brian,.

  I understand that you are unable to download the Microsoft diagnostic tool report. You can view the screenshots. See this link for the instructions download the screenshot.

• Windows Movie Maker does not show the extire file

  original title: VOB's with Windows Movie Maker and Windows Media Player.

  Ok.  I have a DVD that was made of a VHS tape.  There are several VOB files only when you open with Windows Media Player are still drop and are less than an hour long.  I want to take out of hours of video clips and post them to YouTube.  I used WIndows Movie Maker to edit my videos.  When I opened one of the videos with WMM, it will display only 14:41 the vidoes and not all of it.  I've seen the proposed changes to the MPG or WMV file extension.  I made a copy of one of the VOB files and renamed the extension to MPG.  Now when I play this copy of this file, as it is now is only 14:41.  He did the same thing when I tried to change WMV.  I need to know how to get the entire file appears in Movie Maker.  I tried to use Any Video Converter but it will show up only there as a 14:41 file as well.  I copied all the files on the DVD also.  There are two of them. BUP and two. It is of the IFO files.  Here are the videos from a friend of mine who was a boxer.  He passed away this summer and I want to download these videos in tribute to him.  Any help would be great.  Thank you.

  Thanks for the info.  I was think there later that day and I was wondering why when I play all the VOB's to he it's all the same hour on video.  So I opened the first with Movie Maker and added then the following for her, there were five in total.  After you have added all the he composed the entire hour long video.  All I had to do is then save it and now it is in WMV format so now I can modify it.  Thanks for your good help.

• Windows live mail does not show deleted items

  Under a fast display, it doesn't show deleted items. How to restore?

  Thank you, Bruce. Today than a live windows position was who has the deleted items folder. The title of the folder it contains is what was not there the last day of little. Hope that he corrected himself because I couldn't figure how to fix.

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.