Windows 7 ultimate does not legitimate after reinstall thanks to wubi install linux

Similar Questions

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• Windows Vista Ultimate does not install on Satellite M40

  Windows Vista Ultimate settles not on this laptop. Vista hangs after the installation and does not start. Someone knows what's the problem?

  Hello

  As mentioned above the hardware of the laptop must be compatible and must be able to manage the Vista. The M40 is certainly not Vista capable
  But I have installed Vista on the A50 and this laptop is no longer able to Vista but I upgraded the RAM and HARD drive and it works.
  Of course, the many features of Vista like Aero don t run but I was able to install it.

  Maybe the BIOS is not compatible with Vista! It is possible

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.

• Business app does not work after reinstalling Windows XP

  Original title: program programs application Applications compatibility

  I have an application that runs on the client computer with XP.  When I run the application, it will be all first authenticates the user by collecting the ID of the system that must be registered with the key to series given by the owner.  Once the registration takes place, then only, the application should open. Recently, I had to reinstall XP Pro (SP3) on my PC. Now, the same application when it is running on my PC with XP or laptop with Windows 8 with compatibility to XP, it does not jump the authentication window, instead, directly opens the application.
  Without authentication, the application should not open. What is the solution.

  Hi Santosh,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=windowsxpitpro

  I hope this helps.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Windows 7 Ultimate does not show wallpaper after update in Vista Business

  I did the upgrade from Vista business to Windows 7 Ultimate and cannot make a wallpaper of work. I can select only solid colors, but not images or slideshows. I googled for similar problems and it seems people offer various solutions, including through 0 to some attributes of registry related to Active Desktop under HKLM or HKCU Software / Microsoft / Windows / CurrentVersion / policies... And also checking / unchecking a few boxes that appear under easy access control panel, but nothing seemed to help. So I'm a bit lost and it's pretty depressing always focus on the black background, knowing tones of beautiful images are waiting for show it :(
  Can anyone suggest what can be done in this case? New - only full office colors can be changed at this point...

  I finally thought to myself... I don't know which two actions helped, but here's what I did:

  1. I made an order of setwallpaper default under various graphic files pointing to Windows Photo Viewer CLSID extensions (before they were pointing to a different CLSID, which I believe was Office Fax Viewer - {ff609cc7-d34d-4049-a1aa-2293517ffcc6}). Here's how I did it:

  -In RegEdit, I searched "wallpaper" and under HKCR\SystemFileAssociations, he found several extensions (.bmp, .jpg, etc) where I swapped the value for a key 'HKEY_CLASSES_ROOT\SystemFileAssociations\.bmp\Shell\setdesktopwallpaper\Command\DelegateExecute' of {ff609cc7-d34d-4049-a1aa-2293517ffcc6} to {FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}

  - Then he found similar key under HKEY_LOCAL_MACHINE - their values were already set to {FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}, but it won't hurt to check

  2 then I removed the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Control Panel\Desktop\Wallpaper". This key has an empty value - so I assumed that there is not much use and then shortly after I did it I got my wallpaper of the theme chosen.

• Sync does not work after reinstalling Windows 7

  Sync works great between my Windows 7 Desktop and 8.1 tablet. The PC got a clean installation of Windows this weekend and now Sync does not work. I do not receive my bookmarks/history/etc on the desktop.

  -Two versions of Firefox are updated (40.0.2)
  -J' read the troubleshooting and installation FAQs
  -I am able to sign in sync on both computers
  -For the signature, I get a popup saying that Sync will begin momentarily and an e-mail notification. Nothing happens tho.

  I suspect that the problem is related to this 'new' version of Sync. I tried to follow the FAQ "Updated to the new version of Sync", I took off the two devices, I checked both are on the latest version of Firefox, but the next step is to create a new account to sync and it doesn't let me do, I plug my email and get "account already exists." What Miss me?

  The new profile created from the clean windows installed a fusion with other devices? Check the device to see if it retains profile data.

  Have you changed the password? This would stop all data from previous synchronization that was not local.

  If you go down this road of troubleshooting, the account must be deleted first. However to prevent data loss, you can click on remove account from accounts.firefox.com and then re - sign up.

• Windows 7 Ultimate does not recognize the Tungsten E2

  After that I've upgraded to Windows 7 Ultimate, Windows does not recognize my Tunsten E2 cable into the USB port.  I went to Device Manager to search for a triangle in order to use Aceeca.  However, there is no triangle.

  I tried using a USB key into the USB port and it worked perfectly.  However, when I tried my cable of tungsten, it's as if nothing happened in the USB port.  No recognition by Windows at all.

  Any viable solution would be much appreciated.

  Thank you.

  Hi WyreNut,

  FYI: I got it working.  However, there are a few things that had to be done.

  1. clean unlock it.

  2. go to regedit and make sure that all records of palm have disappeared.

  3. after cleaning regedit, I cleaned the registry again.

  4. disconnected from the USB port.

  5. restarted my computer.

  6. USB connection back into the port.

  7. follow the signs to Aceeca.

  8. everything works.

  Have a great week.

• mute dv4 1225dx windows 7 button does not work after restarting

  Hello world. I will try windows 7 on my pavilion laptop and everything works perfectly except the button mute who does not work (do not put on mute or turn red). I installed the driver sp45073 which is supposed to be the one to W7 64-bit. the curious thing is that it works perfectly once the computer restarts after the installation, but if I restart again, it stops working. If someone could help me that would be great. Thanks in advance,

  Well, I ended up reinstalling windows 7 64 and it works now. It seems that the problem was the installation of the drivers via windows update. I just installed those appearing on the hp Web page and there is no problem so far.

• Windows 7 Ultimate Key not working after clean install!

  Hello

  I reinstalled windows 7 ultimate 64-bit because my computer got slow.

  So I followed all the steps, but when I tried to activate my key does not work.

  I reinstalled windows once before because it was full of junk, then the key worked (windows has been activated).

  When I did first reinstalling windows, I made a screenshot of the window that says that windows is activated.

  I'm a little desperate, please help.

  Sincerely,

  mvegter197

  P. S.

  Sorry for my English, I'm from the Netherlands. (screenshot is in Dutch)

  Well he's activated windows.

  I reinstalled again and installed the driver network first, then activated windows. When I got the activation problem I first changed a few things in the control panel and windows update before you activate.

  Thanks to everyone who helped me.

  Sincerely,.

  mvegter197

• WiFi does not work after reinstalling the system

  I have Pavilion dv6t - 6 c 00. I had to reinstall Windows 7 due to a virus. After installing all the drivers available from hp.com for my model, everything finally works but Wifi still does not (network controller shows lack driver even after I tried like 8 different). Here are the technical details:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Appreciate any help. Thank you!

  Hello:

  Download and install this driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Windows 7 Aero does not work after the computer and Lync 2010 screen sharing session force shutdown

  Hi guys,.

  I can't activate Aero, my theme is stuck on Basic after that I got a power issue and forced stop running Lync 2010 screen sharing (this disables Aero but it turns on when the sharing is stopped).

  I'm running Windows 7 Ultimate x 64 on a workstation with the following specifications:

  CPU: AMD Phenom II X 4 955

  RAM: 16GB DDR3 Corsair

  GPU: nVidia GTS 450 (1 GB of GDDR5 memory)

  My Windows experience index is 5.9 (determined by HDD SATAII, the rest scores are higher than 7).

  Troubleshooting I executed before writing these lines:

  • Updated my nVidia drivers
  • Checked the themes and DWM Session Manager services, both started, both the Auto value
  • Ran the store built, the problem cannot be resolved
  • Running the Wizard Microsoft Fix It, he pointed out that my graphics card does not support Aero Glass

  So the GPU is not the problem, I've been running Aero until this problem has occurred.

  Any ideas?

  Thank you!

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum.

  You can follow the link to your question:

  The customers TechNet Lync and devices Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads