Windows 7 Ultimate will modernize Vista Ultimate using the full version (not the upgrade version)?

Similar Questions

• In Windows 7 Ultimate, using the Universal application box, but shows terminate error 00000001

  I am using windows 7 ultimate .i used universal box of the application there is error 00000001 showingterminate. How can I solve this problem? Please answer soon...?

  Hello

  Please provide the requested information for a better understanding of the issue.

  1. When you make facer this error "terminate error 00000001 '?

  2 are you facing a bluescreen error or a system failure when you receive this error?

  3. what was the recent change in hardware or software performed on the computer before the question?

  Once you have published the information requested, I'll be able to provide specific troubleshooting procedures to help solve the problem.

  You can also try to uninstall and reinstall the universal box and check first.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I hope this helps.

• Reinstallation of Windows Vista by using the upgrade media

  I'm trying to fix my friends computer. Each time it starts up, it says Windows could not load the NLS being missing or corrupted data. Reinstall Windows Vista. When I try to reinstall vista using the CD there that said to use use this product key you must start Windows installation while running your existing version of Windows. What does that mean? What should I do? The computer used to have XP and it has upgraded to Vista using this CD.

  If Vista is an upgrade, so it must be installed as an upgrade.  Install the original XP operating system and turn it on.  Then upgrade to Vista and which to activate.  You can't ignore all during the first stage.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• If I have to reformat Windows 7 I will be able to use the download Windows Anytime?

  If for any reason any I have to reformat my computer I will be able to download and use only my previously purchased at any time download for free as long as I know the keycode?

  Yes.

  Here is an example:

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
   
   
   
  -Samsung uses ESC on most of its systems
   
  -HP use F9 on most of its systems
   
  -Fujitsu uses F12 on most of its systems
   
  -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

  -Dell uses F12
   
   
   
  In general, look at the screen during the POST for a tip for what is possible.
   
   
   
  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
   
   
   
  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• Hello, I currently windows 7 Home premium 64-bit running on my laptop, can I install windows 7 ultimate 32 bit over this as an upgrade? I have the ultimate disc then, how do I use it? Thank you, Mark.

  I am running windows 7 Home premium 64 bit on my laptop. I have a disc of windows 7 ultimate 32 bit, is it possible to upgrade to the ultimate disk, if so, how, if not how do I use the ultimate disc? Thank you very much, Mark.

  No, you can't, but if its Windows 7 Ultimate you want, simply use the Windows 7 Ultimate product key to upgrade Windows 7 Home Premium to Windows 7 Ultimate using Anytime Upgrade.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  Cases of failure to upgrade Express:

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Is it possible to upgrade Enterpsie from Windows Vista to Windows 7 using the upgrade HP program?

  Hi all

  I want to upgrade to Windows 7 Windows Vista Enterprise. I read on the ability to upgrade to Windows 7 at low administrative cost by HP upgrade program. However, the site mentions that I can only upgrade from Vista Home Premium, business or ultimate edition. My laptop HP (the EliteBook 8530w) had Windows Vista Enterprise is installed. So I want to know if it is possible for me to upgrade to Windows 7 using the upgrade HP program.

  I bought this laptop from my University. They had a program, so we could buy our laptop with many applications that we need for our study pre-installed. It could be that they have replaced the Vista HP installed with Windows Vista Business version. If this is the case, is it possible for me to somehow re - install the previous version of Vista, so I can still take part in the upgrade program?

  I bought my laptop at my University. They have installed all the software and it is possible that they also installed Windows Vista business. When I looked at the description of the Elitebook 8530w, he mentioned Windiows Vista Ultimate as the operating system. So I am clueless why my University is using Windows Vista Enterprise.I have decided that I will contact HP support on this issue, to see if I can install Vista Ultimate and then upgrade to Windows 7.

  UPDATE: I contacted just HP support by phone. The Elitebook 8530w comes with Vista Bussiness installed and they send me an installation disc within 14 days. They have also described here it might be possible to do a clean install with upgrade cd, although they did not know for some. I think I'll try the clean install first, and if that doesn't work, I'll install Windows Vista Bussiness and then perform the upgrade.

  In any case, I want to thank everyone for the help they provided.

  Message edited by Bliepo on 10/29/2009 05:57

• Before you buy Windows 7 it will modernize my Windows XP?

  Before you buy Windows 7 it will modernize my Windows XP?

  First, see if your computer meets the Windows 7 system requirements:

  o 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  o 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  o 16 GB available space disk (32-bit) or 20 GB (64-bit)
  graphics device o DirectX 9 with WDDM 1.0 or higher driver

  If so, run the Windows 7 Upgrade Advisor to check for possible problems.  If it passes this test, you can buy a Windows 7 upgrade version and use it to perform a custom (clean) installation.   For more information, see upgrade from Windows XP to Windows 7 and Windows 7 Upgrade Considerations .

• just downloaded windows 7 ultimate throught (the anytime upgrade feature) and now it won't turn on... Please help

  just downloaded windows 7 ultimate throught (the anytime upgrade feature) and now it won't turn on... Please help

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows Media Player will burn a data CD for us but not an audio CD.

  Windows Media Player will burn a data CD for us but not an audio CD.  We have Vista Home Premium with Service Pack 2.  Tried another brand of CD, slower burning speed, etc., but still does not.  And can not uninstall Windows Media Player and reinstall.  Help!

  Hi KathyDobrowolski,

  1. were you able to burn an audio CD before?

  2. what type of file you want to burn?

  3. This only happens with a particular file type?

  4. are you able to burn CDs with any other application?

  5. you receive messages or error codes?

  If the song file is protected by the rights of use, these rights may allow for playback of the song on the computer but prohibit burn them on a CD. If the Information button appears next to the song in the burn list, click the button to see more information on the issue.

  For more information, see the following link:

  Burn a CD or DVD in Windows Media Player: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista. I shut down the computer?

  Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista.  I shut down the computer?

  Yes. Close and restart, the updates will catch up.

• I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them

  I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them that I just want to be able to use the system restore and information system.  Thank you

  Hello

  What is the full and exact error message?

  Check if the article below or the thread will help.

  How to use restore system with Windows Management Instrumentation in Windows XP
  http://support.Microsoft.com/kb/295299
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/my-WMI-file-is-missing-i-am-running-Windows-XP/86242cad-ee5a-E011-8dfc-68b599b31bf5

• Want to downgrade from Windows 7 to XP using the upgrade disc

  I installed windows 7 on my laptop. Many problems. Tried to re - install Windows xp with a upgrade version, but will not recognize windows 7 upgrade to xp. How to re-install xp with a upgrade disk.

  * original title - replaced with win7 winxp. have xp updated but will not be installed with win7. How to make xp back on computer

  Hi Allen,.

  You will not be able to install XP on Win 7 using the upgrade disc. You will require your original operating system disk and you will have to boot from the OS installation disc, once installed you can use the disk to upgrade XP on this operating system. Another way is out to install your system disk and the boot of Winxp.

  I hope this helps.

• Cannot left click to advance to the next image in the image windows Viewer. I can move forward using the keyboard

  Cannot left click to advance to the next image in the image windows Viewer. I can move forward using the keyboard

  I have a folder of photos that I opened to see several thumbnails. I can left click on a picture and it will open full screen. Then I left click on this image and the next should show but nothing happens. I can use the keyboard arrows to move to the next photo, but I can't use the mouse. The left click works for everything I use it for. I've used regsvr32 /i shimgvw.dll and he said DllRegisterServer and DllInstall in shimgvw.dll succeeded. This does not solve the problem. This isn't a big deal, it just bugs _ on me because I'm a perfectionist. Thank you for your response and any other help would be appreciated.

  ===============================================
  If you use Windows Picture and Fax Viewer... left click of the photo is
  not supposed to promote the image. (some image viewers work this way
  but not Windows Picture and Fax Viewer)

  Left click on the blue arrows at the bottom of the screen will advance
  photos.

  See arrows in the following photo:
  http://blog.BrotherSoft.com/wp-content/uploads/2008/12/extend_200_image_support_for_windows_picture_01.jpg

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• IPhone 7 will accept multiple fingerprints using the key ID?

  IPhone 7 will accept multiple fingerprints using the key ID?  If so, how?

  My iPhone 5 allows you to set up several fingerprints via settings > Touch ID & password, I doubt that the iPhone 7 would have fewer features.

  (I asked for your message to be moved to the forum from iPhone to help, do not know why you decided to post on the forum to help iPad.)

• The new MacBook with touch of force will be able to use the pencil to Apple?

  The new MacBook with Force Touch will be able to use the pencil to Apple?

  N ° of Apple pencil only works with iPad Pro (the iPad Pro is sold in two sizes).

  Use the pencil to Apple with iPad Pro - Apple Support