Windows 7 update disabling Intel my WiFi Technology adapter

Similar Questions

• In the notifications area, shows an error "Intel my Wifi technology: card not found".

  I have a HP Pavilion dv6 6031-tx laptop running Windows 7 64 - bit, bought last month. I still have to use the technology wireless with this device, but have you noticed the error message ' Intel my Wifi technology: card not found "when plane on an icon in the notifcation area. First of all, I noticed this little time after the update from my computer through the program of support of HP, but it could be he leave early.

  Thanks for the follow-up, but after a bit of searching on Google, I managed to find a solution.

  In Device Manager, I have cahanged the the power management of wireless devices by unchecking the option "allow the computer to turn off this device to save power". When the computer reboots, the error message disappeared.

  Thanks anyway

• Satellite L655-11J - disabling Intel Turbo Boost Technology for heat

  My temp Satellite L655-11J used to be under full load of cpu 75 now, it's about 80 ~ 85 maybe because of the heat wave, I don't know

  I disabled the Intel Turbo Boost technology and its high value at full load is now about 68 ~ 69 and the laptop is not hot at all, and I did not notice a difference in performance, so you should try it if your laptop gets hot

  My question is there utility to disable through windows?

  null

  > My question is there utility to disable through windows?

  Usually, this must be done in the BIOS.
  But as far as I know Toshiba offer a tool called Toshiba HWSetup located in all programs-> Toshiba.
  This software allows you to change some settings in the BIOS Windows System.

  I m not very good if you the Intel Turbo Boost Technology options are available in the HWSetup utility, but you can check it otherwise you will have to change the settings in the BIOS

• What are windows vista compatible with intel rapid storage technology

  I had fix it Purifier and as he came the technology intel rapid storage, what is it and is it compatible with vista and I can uninstall without creating a problem, thank you

  Hi nancych159,

  Intel rapid storage technology is a required for your hard disk controller is compatible with Windows Vista. For more information, see link below

  Intel rapid storage technology

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?ProductID=2101&DwnldID=19607&lang=eng&IID=dc_rss

  Note: Before installing this application or technical support from Intel, it is suggested that first contact you your system manufacturer. They can provide the software that is specifically configured for your system

• Update for Windows 7 update driver Intel Corporation Intel HD Graphics 4600

  I get error message Code 80070103 Windows Update has encountered an unknown error when I try to make this important update.  I tried to restart my computer and no difference - the same error.

  Just another instance of Windows Update using a wrong driver update.  It is unlikely that you need to update the driver, but if you want to:

  Click on Start globe

  Find Device Manager by typing device in the box above

  Open Device Manager

  Click on graphics cards

  Right-click on the list for you Intel graphics, choose software update

  OR

  Go to the web site Intel utility driver and download and run it.

• Message 'Adapter Intel My WIFI Technology' not found

  HP Pavilion dv7

  Windows 7 Home Premium 64-bit

  I can't turn on the WIFI system, noway, nohow.

  I downloaded the latest driver/utility intel HP and the WIFI of MY work once again, when I click on the button Activate the button turns red and it shows active, and I'm able to share the WIRELESS internet to my.

  However, the taskbar Icon is still showing the "... adapter not found" message, although it works!

• Cannot install Windows 8 update for Intel 965 Express Chipset

  Updated - update the driver Intel Corporation for Mobile Intel (r) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1) moved.

  Displays error:
  Some updates have not been installed.
  Failed: 1 update
  Errors found: Code 80070002

  Current driver Info:
  Driver date: 23/09/2009
  Driver version: 8.15.10.1930

  System information:
  Edition: Windows 8 Pro with Media Center
  Type: 32-bit performance, x 64 processor

  Had the same problem.

  Just go to C:\Windows\SoftwareDistribution\Download\Install (may be different, just check where the drivers have been downloaded)
  Right-click on igdlh.inf and select install,
  worked for me :)

• Intel MY WiFi Technology, when I try to "share my Internet", I get the message below:

  Product: Pavilion dv7-6c80us

  OS: Windows 7 64-bit

  Error message: "your Internet connection is currently shared with another personal area network (PAN) such as.

  Bluetooth *.  In order except my Internet, the other SIDE will lose access to the Internet. »

  Looks like that in the error message that the other SIDE would lose the connection to the

  Internet and other devices would be able to connect to my computer, but this is not the case.

  Any help will be greatly appreciated.

  Hey Buddy. Have you tried these steps yet?

  http://www.Intel.com/support/wireless/WLAN/mywf/sb/CS-029375.htm

• Problem starting Windows 8 (associated with quick start + Intel Smart Response Technology SSD cache)

  Hello
  I have a problem with the fast start-up of Windows 8. When I shut down my PC everything works fine, but when I turn on the PC, Windows will load until a certain point and then suddenly start screen appears again. The second departure is always successful.

  I discovered, when I turn off the Quick start, the computer starts without error on the first attempt. It goes the same for when I disable Intel Smart Response Technology (SSD cache). There are no problems when I use Hibernate mode.

  Recently I did a BIOS update, so I don't know if there is a setting in the BIOS that is may cause this error?

  Thanks in advance for any help!
  Martin

  Hi Martin,

  Glad to know you solved the problem. Thanks for sharing of the resolution, because it would help the other members of the community to the same question.

  Please do not hesitate to answer, in case if you need help or information on this issue.

• Windows 7, update services does not work

  I have a problem to update software in windows 7.

  I have a HP G72 laptop.

  I replaced my hard drive. 350GB, Western Digital 750Go digital West.

  -J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).

  The new disk hard there however any possible updates of windows. (the bar is red on the left).

  -After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.

  -Remove the folders from the dir c/windows/SoftwareDistibution, no results.

  -Checked the status of services: windows update is statred and in automatic mode.

  N ' tried microsoft 'Fix - it' no results.

  -updated the drivers intel, no results.

  -Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.

  Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]

  Do a clean boot, without result.

  Does anyone know a solution to this problem.

  Thank you.

  Ed.

  Windows 7, update services does not, RESOLVED.

  The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.

  For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .

  Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.

  Good luck to solve you yours it took me two weeks to find it.

  Ed.

• Microsoft Virtual WiFi Miniport Adapter missing (hostednetwork starts but cannot connect devices)

  I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.

  But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop. He sees the connection, but still hung on authentication / "obtain an ip address" phase and sometimes loops around that. While this same cell phone is able to connect to wifi hosted on the laptop from my friend, via the same netsh command, also it connects fine to routers wireless etc.

  I noticed that in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" has disappeared. I tried to run the command

  "netsh wlan set hostednetwork mode = command not allow."

  and then

  "command netsh wlan set hostednetwork mode = allow."

  but nothing is done, the virtual wifi adapter doesn't seem to be back. I've updated my drivers for wireless card that is "Intel Centrino Wireless - N 1030 BGN". But still no change, map of miniport does not return. Then I ran the cmd command "sfc/scannow", in the hope that maybe some file is corrupted and he could get fixed, but even after checking and restarting, it was still no effect on wifi.

  So, basically, that is what is happening, I run the command

  "netsh wlan set hostednetwork ssid = keyUsage htc = key command persist = mode abcdefgh = enable".

  and it will

  "Hosted network mode has been set to allow.
  The SSID of the network hosted has been changed successfully.
  The user key hosted network password has been changed successfully. »

  Then I run

  "netsh wlan start hostednetwork.

  and it will

  "The hosted network began.

  But in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" does not appear, instead when the connection is started, "Microsoft hosted virtual network adapter" appears and disappears when the hostednetwork is stopped. But nevertheless, no device is able to connect to this hostednetwork, stuck on authentication / phase "obtain an ip address", as a DHCP server is missing or something.

  Kindly, help me out I searched on internet a solution for almost 2 days now, but nothing helped.

  Abdoulaye.

  Follow the links and check

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/566a63d9-a5f8-4210-a5ee-48411425f5c3

  http://social.technet.Microsoft.com/forums/en/w7itproui/thread/86ab166f-0d3d-4b9b-ad7f-4b840221ac33

  http://www.SevenForums.com/network-sharing/14593-Microsoft-virtual-WiFi-miniport-adapter.html

  http://helpdeskgeek.com/Windows-7/what-is-Microsoft-virtual-WiFi-miniport-adapter/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-virtual-WiFi-miniport-adapter/cccc143a-2fa8-41EF-B4C5-20cc233c2720

  http://msdn.Microsoft.com/en-us/library/dd815252 (vs.85) .aspx

• Download Microsoft Virtual WiFi Miniport adapt

  I want to download Microsoft Virtual WiFi Miniport Adapter but I can not find the download link for Microsoft Virtual WiFi Miniport Adapter! Please, I beg you!

  For information, see - http://msdn.microsoft.com/en-us/library/dd815243 (VS.85) .aspx and http://helpdeskgeek.com/windows-7/what-is-microsoft-virtual-wifi-miniport-adapter/

  If its apparent problems, try to remove/uninstall from Device Manager and reboot the PC to see if that helps.

  But, if there is one, what's your real problem?  It does not say the missing drivers, or you just want to update? If it is enabled in the Device Manager?

• Computer laptop Windows 8 is not connecting to wifi after update

  My windows laptop 8 recently updated and now I have wifi problems.

  It is connected to my wifi, but won't really go on the internet?
  Makes me crazy lol
  My laptop is an Asus K55A
  Can anyone help!

  It works:

  -> Intel® Dual Band Wireless-AC 7260 more Bluetooth 4.0<>

  -> It works already any WiDi + WiFi + BT<>

  Uinstal all WiFi + BT aplications for before connection.

  Install the sample driver to Win 8.1 64bits

  The sample driver for Intel link

  Œuvres:

  -WiFi, WiDi, BT

  -Skype reception/end calls of the click in the headphones.

  -Sending pictures from phone to computer (Android or Win Phone)
  WiDi - by dragging your finger across the screen.

  (Thanks INTEL who you are). It works, nothing more, I'm sorry.

  Another manufacturer loose hell (Broadcom, Atheros, Keeler),

  My year of life, for the configuration of return!

  

  

  

  other devices---> push their signal---> your card is reduced.
  because do not want to collide with the old maps of wifi technology.
  Your card is smart and gives way to the road, another wifi. :-)

• Update the offsets of wifi driver WiFi Ralink 802.11 adapter problem b/g/n after Windows 8

  Hello

  I recently experience this terrible problem with my Wifi, everything used to work fine until a recent Windows 8 update (I don't remember which exactly) because I thought that the problem is related to my antivirus or I need to reinstall my windows because its gets lag

  The problem is that the Dungeon of Wifi that come and go, which causes terrible lag and crashes when I try to play games online such as Dota2 or other

  Please check this picture: http://i.imgur.com/U0Ns0Yw.png

  the photo shows the behavior of the Wifi during an online game, it continues to go up, then down to ZERO (here when he lags behind in the game) then reassemble and so on

  I tried several versions of the driver already installed later did nothing, installed the older... still nothing works.

  Notes:

  -the problem is not due to my router, I checked with my other PC and it work perfectly without delay whether

  -my laptop is a HP Pavilion 2212ek g6

  -Currently, I installed the latest version of Ralink 802.11 b/g/n WiFi adapt Driver 2013-04-27, Version5.0.25.0

  -My wireless card is: Ralink RT3290 802.11bgn wifi adapter

  anyone with the same problem as me? anything to solve this problem? Help, please!

  Thank you very much

  Hello

  I think that I sloved the problem, after a morning of messing around with drivers and reboots

  the trick is to go to the

  1 - Control Panel

  2 - Click on hardware and sound

  3. in the devices and printers click on 'Device Manager '.

  4. in the "Device Manager" click on "network adapters" then right-click on the ralink 802.1bgn wireless adapter, then click 'properties '.

  5 - go to advanced

  6 choose the sensitivity of homelessness

  7 - change the Disable value

  that worked for me, hopefully it do the same for you

• Intel Rapid Storage Technology driver update for HP ENVY Phoenix 810-135qe desktop

  Hello

  I recently bought a HP ENVY Phoenix 810-135qe desktop computer, during a performance of the construction in the auditor of updates to HP program that it is announcing the following update available for my machine and I was wondering if there were more details about what he actually did and/or updates/patches?

  Intel Rapid Storage Technology driver

  Description
  This package provides the driver for Intel Chipset SATA RAID solutions and SATA AHCI Controller in models supported that are running a supported operating system.

  Communicate details
  Exit the: 2014-01-23
  File name:sp65114.exe [1/1, 17.92 M]
  A Version12.8.2.1000 Rev.
  Compatibility:
  Microsoft Windows 7 (64-bit)

  Fix/development
  -Provides original drivers

  As you can see the description of correction and improvement really provided no details as to what is fixed or improved.

  If I need to apply this patch, it would be nice to understand a little better what to expect and what is fixed and/or improvements.  You have to forgive me because I'm old school and I usually generally follow the routine "if it ain't broke don't fix it".  I'll do what it takes well so I have a better understanding of what is going to happen in the case where updating mess something inadvertently.

  Thank you

  JCOOPER2

  Hello:

  What is the technology Intel Rapid Storage Technology software.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-020784.htm

  It is not necessary to install the update if you do not want.

  I doubt you will notice a difference in performance if you have it installed.

  It is unlikely that all the problems would result in the update (however could apply Murphy's law), but like you said... "If it ain't broke, don't fix it."