Message 'Adapter Intel My WIFI Technology' not found

Similar Questions

• In the notifications area, shows an error "Intel my Wifi technology: card not found".

  I have a HP Pavilion dv6 6031-tx laptop running Windows 7 64 - bit, bought last month. I still have to use the technology wireless with this device, but have you noticed the error message ' Intel my Wifi technology: card not found "when plane on an icon in the notifcation area. First of all, I noticed this little time after the update from my computer through the program of support of HP, but it could be he leave early.

  Thanks for the follow-up, but after a bit of searching on Google, I managed to find a solution.

  In Device Manager, I have cahanged the the power management of wireless devices by unchecking the option "allow the computer to turn off this device to save power". When the computer reboots, the error message disappeared.

  Thanks anyway

• Windows 7 update disabling Intel my WiFi Technology adapter

  I recently bought a Vaio laptop for WiDi features.  Out of the box, it worked as advertised, but after a tour of the various updates from Microsoft and Sony, the WiDi becomes invalid.  The message that appears is: My technology Intel WiFi disabled, please reboot your computer.  Another message that appears is: Intel My WiFi Technology: card not found.  I poured over all the seller community postings (Netgear, Intel, Sony) on this issue, but nobody seems to have a solution.  The only recovery method must do a restore of the entire system that puts everything back to factory settings.  As soon as I did this, it works for a bit, until the updates download again.  I tried to turn off the auto updates, and I have ensured that all the newer drivers have been installed (in the same after doing a full system restore), but nothing seems to prevent the adapter to become invalid.  I have no problem with WiFi, only the WiDi.  This issue seems to affect all brands with WiDi capabilities.  I don't know if it affects only Intel i5s or two i5s and i7s.  Does anyone have any other suggestions?

  Thanks for the suggestion to roll back the driver.  However, I have found that when I open the Device Manager, I managed to re - activate the device working properly and it was not necessary for me actually to restore the driver.

• I am suddenly unable to burn playlists to CD on my MacBook Air. Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.

  Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  Hi BVBigelow,

  I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.

  12 iTunes for Mac: If you have trouble burning a disc

  Take care!

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  George in San Diego

  Assuming that Windows XP has been reinstalled just for some reason any...

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I try to install the program on uniblue power I get an error message that the mia.lib was not found.

  When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?

  Hello
  Yes, it seems that this program is not running Windows XP. If the requirements for this program is Windows Vista or Windows 7, then the upgrade may solve your problem.

  I hope this helps. Just reply to the results.

• Parser Message: RCINT failure. STRINGTABLE ID not found. "42" to line 462.

  Whenever I start my computer, I get the following error;

  "Parser Message: RCINT failure." STRINGTABLE ID not found. "42" to line 462. "

  It does not even stop my machine gently. I have to putoff my power of the machine.

  If anyone has a solution please let me know. Your friendly co-operation would be really appreciated.

  Kind regards
  Abdul Wahab.

  Something that you have running in the background is a failure. Autour Googling shows a person who installed XP Style and that was causing the problem. Other links show people with the problem but no solution. So if you have not installed the XP Style, you will need to do some systematic troubleshooting.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is completely virus/malware-free, manage your startup to find the culprit.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Parser Message: RCINT failure. STRINGTABLE ID not found. "42" on line 23

  After that my pc has a virus, I implemented the Eset NOD32 Antivirus. I could scan all, but finally when I connect to my pc; He shows me the error message "Parser Message: RCINT failure." STRINGTABLE ID not found. "42" on line 23". I don't know how to solve. Pls help me... THX in advance u.

  Hi TitanSRT,

  1. Exactly when you receive the error message?
  2. You are able to boot into Windows after the error message?

  I suggest that you scan the computer for malware infections or viruses remaining and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  If the computer does not start in Windows, and then start the computer in safe mode with network mode and perform the analysis.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

• Windows 8 don't print a report with Quicken 2006. The message is "the PDF driver is not found.

  Just bought a new computer laptop operating system windows 8.  Taken some getting used to but it is to be expected.

  I ran Quicken 2006 since 2006 on \vista without problem.

  Windows 8 don't print a report.

  The message is "the PDF driver is not found.

  Any ideas?

  Thank you

  Rick

  Original title: program programs Application Applications compatibility

  Rick

  It seems that there is no driver installed pdf for quicken.  Your best bet is to contect for the pilot to win 8.

• Adapter Dell Wireless 1515 device not found

  I reinstalled just windows vista 32-bit several times that works fine, but when I try to connect to a wireless network there is no current wireless network. I tried to download the drivers for wireless network and I get the error message not found device adapter Dell Wireless 1515, I checked the card connections without wire inside the computer, they are fine. He has also nothing to do with the wireless router, I also tried to activate the transceiver via F2 aswel as Fn + F2 wireless. IM all that ideas, someone at - it a?

  Hello

  Step 1: Check the device status wireless card on Device Manager and after return the same. Also check the Red or yellow fringe for this device.

  Step 2: You can also try the Fix tool running of the article below and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 3: Update the chipset drivers, for this you may need to contact the PC manufacturer.

• Whenever I try to open a program, this message appears "Service.exe - Entry Point not found", it is on windows 2000 OS

  Whenever I try to open a program, this message appears twice "service.exe - point of entry not found" is on the Windows 2000 OS

  I hope this helps:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324762

  If not, you may need to reinstall the OS Win 2 K / Service Pack

• Receive the error message"Witcher2.EXE - point of entry not found «when you try to play The Witcher 2 Enhanced Edition»

  Original title: when I try to start The Witcher Enhanced Edition 2 since the Launcher I get the error message:

  witcher2. EXE - not found entry point

  The procedure entry point? setfilesystem@system@fmod@@QAG?aw4fmod_result@@P6G?aw43@pbdhpaipapax2@zp6g?aw43@pax4@zp6g?aw43@44|14@zp6g?aw4 3@4|4@zp6g? aw43@paufmod_asyncreadinfo@@4@z5h@z could not be located in the dynamic link library fmodex.dll

  Any suggestions... ?

  Hello Nashcat,

  Have you tried to run the Launcher in compatibility mode?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  Have you checked CDprojekt site for an update for the Enhanced Edition? Maybe they are aware of this problem?
  http://en.thewitcher.com/Forum/

• Receive the following start-up error message up to: 'sasnative32bddel.exe program not found - skipping autocheck.

  Whenever my computer starts it gets to the 'microsoft corporation' green loading bar then displays this message 'sasnative32 program not found - skipping autocheck. She disappears and start the computer as usual. How can I stop this from happening?

  I am running windows vista business 32-bit

  I found that the... entry sasnative is implemented by Lunarsoft software (I wonder if they are related to Lavasoft).

  If you had a few Lunasoft stuff installed and uninstalled lately, it sounds like it is not cleaned up after himself.  It's the same thing that happens with software Lavasoft - lack of hygiene.

  You must eddt your registry database and change this:

  autocheck autochk *.
  AutoCheck sasnative32bddel.exe

  At the entrance of XP by default, which is the following:

  autocheck autochk *.

  Just position the cursor and delete the entry so it's back to the normal and reboot.

• When I click on the windows media player, I get a message saying that the page is not found or no longer exists. Why is this

  When I click on windows media player, I get the message, the page you requested could not be found or no longer exists.  Yet, I cannot go into the library for the albums, I copied on media and it opens when I put in a USB stick etc to see the pictures in the media player.  Can someone help please.  I am running Windows Vista Premium Homwe.

  Hello

  You did changes to the computer before the show?

  Method 1: Check the protocol settings and proxy such as mentioned in the article below, and then try to use the functionality of online stores and a Media Guide.

  What protocols use Windows Media Player for streaming?: http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming 

  Method 2: If the problem is uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player:

  a. go to Start and in the search type "or turn off Windows features turn on."

  b. click on "turn Windows features on or off". ""

  c. find multimedia and uncheck the brand in front of Windows Media Player.

  d. restart the computer

  Step 2: Reinstall Windows Media Player:

  a. go to Start and in the search type "turn Windows features on or off". "

  b. click on "turn Windows features on or off". ""

  c. find the multimedia functions, and then place a check mark in front of Windows Media Player.

  d. restart the computer.

  For more information, see the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off