Windows 7 update Modules

Similar Questions

• On all the Windows 7 update Modules (X120e)

  Hi all

  My integrated Lenovo X120e update me program recommend to download many of these "Windows 7 update Modules", what is it?  There are like 6 that he advocates (and 12 as he is listed as compatible X120e on this page: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-76363, all with the same name but with different dates and numbers.)  Can I download them all?  If Yes, in what order?  Or simultaneous?

  Thank you.

  Moderator edit: link fixed.

  Run Windows Update first, then see if updated system offers always them.

• Update module intercepted error: 12007 the server name cannot be resolved

  AHI get dialogue when the computer starts windows 7 Professional update failure. The update module intercepts an error: the error code is 12007. The server name could not be resolved. Check that your internet connection is active and that no system of filtering or security is blocking the connection (Control Panel > Internet Options)

  I run a network home and the internet is connected but still this problem, I use Outlook 2003 Pro and have noticed desktop updtae KB907417 and ms outlook 2003 junk mail filter KB2466074 not sure if this the problem that all other windows update install, it may not update some aspects there are 3 files that will not update service of office 2003 pack 3 (sp3).

  Thank you 1 million in advance - too small Word uses IE8 32 bit as default browser

  Did cancel registration and re-register it, this seems to have solved the problem thanks for all your help

• Outlook Express 6 with Windows XP updated with Service Pak 3.

  I have Outlook Express 6 with Windows XP updated with Service Pak 3. I can receive emails but cannot open them, reply or forward them. This message is received for all the above "there was an error opening this page. An error has occurred. "

  Also when I try to open my address book this message appears "unable to open the address book. The AddressBook is may not be installed correctly. »

  Is Office or Outlook is also installed on this machine? If Yes, see the reference by PA Bear in this thread.
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995

  If Outlook is not installed, see these links.

  Courtesy of Michael Santovec:
  http://pages.prodigy.NET/michael_santovec/techhelp.htm

  All of you who have the same cause.  Something is screwed up with your address book.

  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook

  For more details, take a look at:

  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321

  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm

  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• patch of active update module has stopped working

  Keep is mocrosoft message this patch of active update module has stopped working. Microsoft said it can be fixed by searching online, but the message keeps returning.

  Hi Westsiddavy,

  A. you are able to install updates?

  B. you get an error with the message code?

  C. recent changes made on your computer?

  Try the following steps.

  Step 1: online antivirus scan

  Perform an online virus scan to check if your computer is infected.

  www.Safety.live.com

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2: safe mode

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 3: reset windows update components

  Try this step if you found the error during the installation of updates. Open the link and click the fix button.

  http://support.Microsoft.com/kb/971058

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• 27 - 1110ea: Windows 7 update does not update

  Hello

  I did now 2 installs fresh with the HP recovery discs and both windows update does not work. I tried different patches from microsoft that I found online in this regard and nothing works.

  I don't know if it's related, but said SP1 is installed, but when I look in the installed updates it isn't here. If I try to uninstall from a command promt it says is not installed and if I try to install it from the microsoft download it says it is installed.

  It makes me crazy. I was expecting it to work from a clean install, but it doesn't.

  Any help would be great.

  Hello

  Welcome to the HP Support forum. Thank you for posting.

  If it says SP1 is included, it means it is included and comes with the system, so you can not unintall it - it is part of the system - built in. You will not see the updates installed because it's built, do not subsequently installed.

  It is a known problem that now when you perform a clean installation of Windows 7, the installation updates will be delayed. This is due because of many things including the fact that W7 is more priority Microsoft because of new OS on the juice of the horizon: like Windows 10. Some users have reported that after the new facility it may take hours of waiting until Windows 7 poster updates are available. But don't worry - they are not that critics and you shouldn't worry so much for them.

  I can offer a workaround is to:

  -Windows 7 update agent be manually updated to the latest version > > https://support.microsoft.com/en-au/kb/949104

  -Download directly from MS "April 2015 battery maintenance update" and install it manually

  > > https://support.microsoft.com/en-us/kb/3020369

  -Download Win 7 convenience roll update and install it manually

  > > win x 64

  http://download.windowsupdate.com/d/msdownload/update/software/UPDT/2016/05/Windows6.1-kb3125574-v4-x64_2dafb1d203c8964239af3048b5dd4b1264cd93b9.MSU

  > > win x 86

  http://download.windowsupdate.com/d/msdownload/update/software/UPDT/2016/05/Windows6.1-kb3125574-v4-x86_ba1ff5537312561795cc04db0b02fbb0a74b2cbd.MSU

  This update package, which combines updates dating all the way back to February 2011, is not be made available in Windows Update. If you install a Windows 7 system from scratch, you will need to go out of your way to download and install it. If you do not, Windows Update will download and install the updated way on day one by one, the slower, more tedious.

  You have now all the updates of Windows 7 since its initial release until may 2016

  After that, you try to install the new updates.

  I hope it works for you. Let me know how it goes.

• Reinstall the original software after Windows 10 update

  When I bought my HPE-180 t, it came with Adobe products already installed as part of the package I bought.  After the Windows 10 update, it became necessary to reinstall Adobe first Elements 8 and she asks a code that did not come with disks. What should I do?

  Windows 10 normally do that unless the application is too old.  Adobe Elements 8 first seems to be 2009, well before 10 Windows.  You may need to get a newer version.

• Windows 7, update services does not work

  I have a problem to update software in windows 7.

  I have a HP G72 laptop.

  I replaced my hard drive. 350GB, Western Digital 750Go digital West.

  -J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).

  The new disk hard there however any possible updates of windows. (the bar is red on the left).

  -After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.

  -Remove the folders from the dir c/windows/SoftwareDistibution, no results.

  -Checked the status of services: windows update is statred and in automatic mode.

  N ' tried microsoft 'Fix - it' no results.

  -updated the drivers intel, no results.

  -Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.

  Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]

  Do a clean boot, without result.

  Does anyone know a solution to this problem.

  Thank you.

  Ed.

  Windows 7, update services does not, RESOLVED.

  The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.

  For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .

  Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.

  Good luck to solve you yours it took me two weeks to find it.

  Ed.

• A new username displayed on my computer after a windows 8 update.

  A new username displayed on my computer after a windows 8 update. A name I do not know or do not recognize. After the update, the screen showed 2 users, the name of 'John' and myself. It was not there yesterday, and I'm the only user. I also bought the new laptop so it may not be a previous user. Can someone tell me how to remove 'John' from my computer. I'll do a system restore & see if it works. In the meantime, if anyone has had this happen, do you?

  Spoiler (Highlight to read)

   

   

  Yes, thanks a lot! I had no idea what to do. My husband googgled problem & apparently, what happens with a windows update currnent. I appreciate your help. There are still a lot of window 8 I don't know yet. I am a person mentally XP.

• The console of Windows Server Update Services (WSUS) falls down when you search for updates and displays the following error message:

  An unexpected error has occurred.
  Click the node server reset to try to connect to the server again

  Event type: error
  Event source: Windows Server Update Services
  Event category: no
  Event ID: 7053
  Date:
  Time:
  User: n/a
  Computer:
  Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
  Cause
  This can happen if the application cache is damaged.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Vista update error endless loop

  I am running Vista SP1, Windows Update keeps trying to install important updates for Vista, but every time he tries, it fails and I get the following error message: "updates were not correctly configured. Returning from the changes.  Then it restarts and goes through him everything again and again and again!  Please help me to solve this problem as simply as possible.

  Here is what shows the history of the Update window:

  Update for Windows Defender - KB915597 (definition 1.49.2011.0) definition important success 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 17 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 17 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 17 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 17 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 17 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 15 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 15 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 15 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 15 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 15 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 15 / 2009

  Update for Windows Mail Junk E-mail Filter [January 2009] (KB905866) successful recommended 1 / 14 / 2009

  Update for the filter of junk e-mail in Outlook 2007 (KB959141) important success 1 / 14 / 2009

  Update security for Windows Vista (KB958687) important success 1 / 14 / 2009

  Windows malicious software removal tool - January 2009 (KB890830) important success 1 / 14 / 2009

  Update for Windows Defender - KB915597 (definition 1.49.1841.0) definition important success 1 / 14 / 2009

  Hi Amby,

  You can try to install the updates in Mode without failure.  To do this, please follow the instructions below.

  When the computer restarts, press F8 while it is starting up.
  In the Advanced Boot Menu of Options, select Mode safe mode with networking
  Once the computer starts in Mode safe, it will hopefully install the updates that you have problems with.  If this does not work, try the following steps to perform a system restore.

  1. Insert your Windows Vista installation disc in the disc drive and start your computer

  2. Press any key when the message "press any key to boot from the CD or DVD shows on the screen.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. click on repair your computer.

  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  6. in the System Recovery Options dialog box, click System Restore.

  7. follow the System Restore Wizard and choose the appropriate restore point.

  8. click Finish to restore the system.

  Please let us know if you need more help, or have any other questions.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get windows or windows Defender Update

  I get the same error codes & I tried all the solutions suggested to update but none worked.  for the windows defender update I get error code 0 x 80240022 for microsoft update I get the 8024402C error code

  0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites
  http://support.Microsoft.com/kb/900936

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft