A new username displayed on my computer after a windows 8 update.

Similar Questions

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• HP ENVY 360 M6: Wfii adapter on new 360 M6 desire becomes invalid after the last critical update.

  The wireless adapter on my new laptop becomes invalid after the last critical update. Reboot / restart, diagnosis or troubleshoot cannot fix or repair. I was forced to do a restore to the date preceding the update. Adapter Ok now? This is a problem on other models?

  Hello

  Try this first

  Download and install the latest driver of wireless LAN adapter can solve common problems with wireless Internet. Follow these steps to use the Device Manager to find the latest WLAN driver:

• Latitude E7440 display goes black / white after "starting Windows."

  I suspect that he is an out-of-the-box issue (like the power button lights, either), but maybe I'm missing something... This particular unit fired upward, as planned and took our standard image. Somewhere along the way (probably during one of its reboots), I noticed that the screen is out. Turn down and the back didn't solve it, or don't have reset the BIOS. Dell diags run without problem and I can start Windows in Mode safe... but whenever I start Windows normally, it removes after "Starting Windows" flashes by.

  AARRGGHH! I'm kicking myself. It was something I discovered some time ago and since then I forgot... I had stacked them! I have closed an E7440, placed another on top of it and proceeded to the image of this second unit. At some point, I must have changed it so slightly... put it right above all that the devil is in the cover of the display of the unit of the first! (A magnetic field, is my guess). And "in white" is the second display unit... hit the light of the power button, and as a bonus. It worked as planned, when I moved this unit to another place, in order to tap into a flat HDMI. And it is blanked, as soon as I put back it on top of the first E7440. Mystery solved.

• No Internet after October Windows 7 update

  I have Windows 7 Home Premium 64-bit. 10/13/2010 my computer has installed several Windows updates. Immediately after the restart, I couldn't have an internet connection on Firefox (or Explorer or other).

  Problemmatic computer is a brand new Dell XPS 7100.  It came with a 15-month McAfee subscription, which I immediately enabled to connect to the internet.  I am connected to the internet via an ethernet cable, attached to a Belkin Wireless Pre - N Router.  My old computer is also connected via ethernet to the same router and works fine.  Wireless on this router also work with a macbook.

  I tried to connect my cable modem directly to the Dell printer, but also without result.

  Any thoughts?

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer to Spybot, Ad-Aware Ad - Watch & guard, guards SpySweeper, etc.), disable any third party (e.g., McAfee) firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #XX below.

  2 Uninstall "Cumulative Security Update for Windows 7 (KB2360131)" or "Security Update for Microsoft Windows (KB2360131)" via start | Control Panel | The Maintenance and the system (if you use Classic view, skip this step). Programs & features | Installed updates day & reboot.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e. KB2360131).

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• OfficeJet Pro 8100: Lost my printer drivers (after a Windows 10 update)!

  Hello

  After the recent Windows 10 updates (one installed on Christmas day), I lost my (custom installed) to the printer drivers. No big deal I thought, ONLY MIcrosoft MOST inconvienience - I'll reinstall just them. But when I open the properties of the printer Panel, I found that ALL ADVANCED TAB where I needed access to reinstall drivers is now GRAY and completely unaccessable! I not only lost my custom drivers, I also lost my second tray of the printer (installed optionally) capacity! YES, MERRY CHRISTMAS!

  Now I need help to reinstall (they gave me specific instructions for installation, so I won't bumble worse trying to install them differently (as a regular driver) without confirmation first.)
  This is a PERFECT EXAMPLE of why we should be allowed to choose for outselves when and what updates to install on OUR computer! I checked the Windows Update history and there is NOTHING there that would strike even he would have had to change printer drivers, nor I anthing that would affect them being changed (for example, allowing control HP from my PC to automatically updated drivers), but clearly something changted them.

  What I HAD... I use a printer Officejet Pro 8100 bought two years ago February next with the option second tray of the installed printer. I also use Officejet 8600 drivers in order to be able to print my graphic files properly (these drivers were recommended on this forum once I have posted having problems printing after the first installation. These drivers worked PERFECTLY in all of my PC (running Windows XP, 8.1, and 10), but now with the missing options, everytting is printing through the upper status bar (where I have a THICK paper). I don't have the ability to choose which try to print (Tray 1 or 2), and I need to change paper whenever I want to print on different paper (I always had a THICK paper on top (Tray 1) and plain paper in the lower part (tray 2) because it would not print thick paper from the tray at the bottom.

  To use the 8600 drivers, I was given specific instructions (on this forum) on install in the section "NEW DRIVER" of the ADVANCED TAB in the properties of the printer. Now that I don't have access to this tab, I need to know if there is a way to access new (my preferred method) OR another way to install (for example just install them as if I would install the printer (8600))?

  It's free enough explainatory tab FULL area is GRAYED OUT, but in case there are any doubts, I have attached is a screenshot showing what he looks like.

  I apprecate any help you could offer.

  Kind regards... Chugbug

  

  OK, now it's really WEID!

  I tried during the last 24 hours to get to the Panel in question, including the restart of Windows at least half a dozen times without success.  But now tonight after that I dug around the different tabs, once again, INCLUDING clicking on through security and permissions panels (but not to make changes) AND for posting my question here, all in the advanced Panel was suddenly accessible once more!

  I reinstalled my 8600 drivers again, then reset my printing (default) preferences (paper 2 / plain plateau), and everything is good again (kumbaya...)!

  Good thing, I took a screenshot of it (grey) or I can't believe myself!

  Happy holidays!  Chugbug

  Screenshot showing access with my 8600 drivers installed:

  

• After the Windows 10 update, I have a problem with color

  I tried really a lot, but when I'm ready with an image in Lightroom (or in Photoshop) and I save in Windows, then the color is totally different. Please, can someone tell me what can be the problem? I'm getting really crazy.

  Thank you

  Check your display settings. Hold down the Windows key and press X on the keyboard, and then choose Control Panel. To the default display mode would normally be sRGB, unless you have a monitor calibrated with a specific profile.

• P7-1298cb: Multi-color flickering lines in columns displayed on the screen after upgrade Windows 10.

  I upgraded Windows Windows 8.1 1O.  I've updated the drivers.  The monitor multicolored poster of fine lines in columns.  The lines of twinkle randomly.  The monitor is a diagonal LED of 2711 x 27 inch HP (XP600A) screen.  It is not that there is a specific monitor for Windows 10 driver.  Any suggestions on how to fix this?

  HI @TLL2016,

  Thanks for getting back to me.

  There is no update BIOS, but there is more recent graphics driver.

  Here is a link the download AMD UMA Graphics Driver.

  Just to check the monitor, here is a document for display quality problems.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Slow computer after reinstalling Windows

  Original title: where can I download XP with SP3 and make an installable CD

  I have Xp home basic CD. As the partition on which the operating system has been installed is full I formatted the HD and reinstalled XP home basic, updated to SP3 as before, but now the system is slow. I did reinstalling, the second time, but the problem persists. I used to reinstall it form the CD, where can I get a CD of XP home SP3 with for installation. OR is the site from where I can download and burn a CD installable.

  The installation of XP Home Sp3 then installation will produce exactly the same results in terms of performance as the installation of a CD with Sp3 integrated on it. You need to study more directly what makes the system seems slow. Because of differences in the product ID, it is possible that the license key that you currently have will not work on a built-in drive.

  You can not legitimately download an integrated cd image but if you have some versions of the software, you can create your own CD burning by slipstreaming service pack on the copied on your hard drive XP CD files, and then creating a new CD bootable with the result.

  A search for "slipstream sp3 xp home" will give you a lot of help.

  Speed for new construction problems are almost always due to hardware specs, the easier to solve in memory.

• After the Windows Vista updates, hard drive of the computer constantly "working".

  Since the last microsoft automatic updates, my laptop is running continuously very strong as if if it does not work on something. It freezes now and then.

  I have a Samsung M60 and use Vista.

  Hello

  I suggest you follow the methods and see if it works below.

  Method 1

  You can make the disk check to check if your hard disk contains bad sectors.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2

  You can run Microsoft Safety Scanner has to check if your computer is affected by virus.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-GB/default.aspx

• Error access denied when I tried to restore my files saved on the computer after reinstalling Windows 7

  Hi all

  I had to re install my windows 7, so I copied all my desktop files to my external HARD drive and from the new facility, I could not backup or even open most files file (most of them are PDF and JPG files) with annoying error access is denied. I have changed the ownership of these files on my user account and grant me full control over files and the same error still there.
  Also, I enabled the administrator account and tried to open the files with it and without change, also tried in safe mode.
  Any help?
  Thanks and greetings
  Nour
  
  Original title: access Denies

  Nour,

  Try here:

  http://support.Microsoft.com/kb/2623670>

  `~`

  The current time and the date now in Baja California, Mexico

  18:39

  Thursday, August 8, 2013
  DST - 0700 UTC

  UTC/GMT is 01:39 Friday, August 9, 2013

  Current weather conditions in San Felipe

  Sunny106 ° C / 41 ° C

• *.psd file icons displayed does not correctly after the CC 2014 update

  I just installed the new version of 2014 of some applications like Photoshop, Illustrator Adobe, InDesign and so on.

  The only problem was caused by Photoshop.

  First of all, all my default manager lost *.psd files, they were empty and no software was set to open.

  And then when I chose 2014 CC Photoshop as Manager default *.psd THIS happened:

  http://i.imgur.com/iFv9ngR.PNG

  as you can see the icon of the illustrator file is normal, but the *.psd file looks like Photoshop.exe icon and not the *.psd file icon.

  any ideas how to fix? (already tried to empty the cache icon)

  OS: Win 8.1 Pro WMC Update 1 (just making it clear if anyway, it makes a difference)

  I had this problem since CC came out last year and I came across a solution yesterday (finally!)

  This implies external Download program 3rd party, but now I have the correct icons, so I'm pretty happy.

  Here's what I did, if it helps:

  (1) download Default Programs editor this link here.

  2) once you have extracted the .zip file open the .exe and we go.

  (3) this is the first screen, you get...

  

  4) click on the first item "File Type settings" and you get this:

  

  5) click on 'icon '.

  (6) for this example I'll change a file, InDesign icon as I already fixed the Photoshop those. An excerpt from the next screen with the white ghost icon InDesign and yes it works if you have the icon default .exe showing instead of a blank white icon.

  

  7) type in the search box the file extension, you need. In this case because I'm changing the InDesign file I want it to be .indd but you can use for Photoshop .psd or .ai to Illustrator etc etc.

  

  (8) now, the program will ask what icon you want. What you need to do is click Browse and browse to the location of the default for the program .exe you change who will be in the folder Program Files. In this case my location is C:\Program Files\Adobe\Adobe InDesign CC 2014\InDesign.exe

  Once you open that default Programs editor will show the full icon set for this program, as you can see below.

  

  (9) simply select the one you want and click OK. Click the arrow next to the Save icon, and then choose Save in the registry and then BINGO!

  (10) GLANCE! He has worked.

  

  Just need to sort all my other out now, but he receives a helping hand to the top of me!

• After that windows 7 update kb/3006137, all extensions are disabled.

  It is the second time I installed an update of windows 7 and all my extensions are disabled with no button to activate the extension window. The last time I reinstalled all, which is a pain. This time that it happened after installing update "kb/3006137." I use Firefox 36.0. Windows 7 64-bit.
  All the solutions to this problem? I don't like the idea to go back before the update, since the critical updates are critical.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.

  If this did not help, then also delete the files addons.json and addons.sqlite possible.

• I had a password lock after a Windows automatic update 14/10/09.

  I restored the system to a point before the updates, and I managed to open a session, but the updates keep installation every time I stop and I have to keep restore to be able to connect. I changed the settings to do not automatically updates, but it keeps the installation anyway, and then it does not recognize my password until I have restore back again before the updates on 10/14. How can I hide the updates or otherwise prevent install?

  Hello

  Control Panel - updated Windows - right click on HIDE - you may have left superiors settings allows you to set
  it to download, but not install if you have a chance to HIDE. Once done, you can set it to auto.
  -------------------------------------------

  You should probably make these institutions.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.