Windows 7 USB issues - ENVY HP dv6-7245us

Similar Questions

• Installation of Windows 7 ultimate 64 bit on DV6 2165TX

  Hello

  I had posted earlier on the unused hardware reserved RAM when I upgraded my RAM to 3 GB, 6 GB. Link pasted below

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-Pavilion-DV6-2165tx-3GB-hardware-RESE...

  I have suggested that I install 64-bit windows.

  I tried to create the bootable USB key, but it simply doesn't. Have tried the steps as mentioned in the following links

  USB bootable - Windows 7 key

  Installation Windows 7 64 bit

  In brief -

  ISO downloaded 64-bit Windows

  Approach 1-

  1 downloaded Windows7 USB DVD Download Tool and created a USB of my 32-bit Windows 7 OS drive

  2. the installation program has not completed. Received error "utility could not create the boot sector on the USB key.

  Approach 2

  1 used my laptop desktop - download Windows7-USB-DVD-Download-Tool and created a drive of my Windows 7 64-bit OS

  2. installation completed successfully

  3 Connecting USB in my DV6, and click on "setup.exe" in the USB

  4. has received the error "this version of this file is not compatible with the version of windows that you use...". "

  Approach 3

  1 used my laptop desktop - download Windows7-USB-DVD-Download-Tool and created a drive of my Windows 7 64-bit OS

  2. installation completed successfully

  3. change the order of boot in my DV6 - to charge from USB

  4. start Windows gets stuck on "windows loading files" and keeps restarting all stuck in the same loop

  Then, when I try to create the bootable USB of my laptop DV6 32 bit, I get an error. When I create my computer laptop desk, my DV6 won't start him.

  I read in one of the positions that

  • You can only create a USB stick bootable Windows 7 64 - bit flash player if your current Windows 7 installation is 64-bit also.
  • You can create a USB stick bootable Windows 7 32 - bit flash player if your current Windows 7 installation is 32-bit or 64-bit.

  I think that even if I try to burn a DVD, it will be the same question

  Can you please.

  Thank you in advance.

  -Tushar

  Found the problem...

  I got 6 GB RAM inserted in the notebook (4 + 2 GB sticks).

  I removed the newly isnerted memory stick 4 GB and replaced the original configuration that is 1 GB + 2 GB RAM

  Windows booted from my USB and I installed 64-bit Windows OS.

  Well that now the purpose of installing64bit what OS is still not reached... as the new Windows does not start when I put the 4 GB of RAM in all configurations

  Thank you.

• I could install windows 8 on my computer hp Dv6-6070ee laptop

  I could install windows 8 on my computer hp Dv6-6070ee laptop

  Windows 8 is compatible for all the things in my computer hp Dv6-6070ee laptop

  Hello

  Thanks for posting again.

  I will now give you instructions how you can test whether Windows 8 will work for you.

  Before we begin, I want to say again that

  • Material to your computer allows you to install and run Windows 8.
  • However, I could not find drivers for your machine to Windows 8 and your model was not officially tested with Win 8HP.
  • Personally, I do not guarantee 100% compatibility with absolutely everything and everything works perfectly.
  • So it is for you to test it or not.
  • The procedure takes time.

  Before you begin:

  1. You must create a recovery HP (disks or USB) media - this can be used in case you want to recover your computer to factory default - instructions can be found here
  2. Very important - using Windows 7 built-in options and go to control panel-> system and security control, click on save to your computer. It opens his backup center and restoration. You will need a disk (CD/DVD) and do a Windows recovery disk. It can be used in the case where you have to reimage the machine and return to Windows 7. Instructions here.
  3. Yet once in the backup and Restore Center-> create a system image - this will make a copy of all your hard drive right now. This will help you restore in Windows 7 and the State of the machine (if Windows 8 does not work for you). Instructions on this subject can be found here. I recommend that you create this image on an external hard drive.
  4. Back up your most important files by using the Windows backup utilitity - instructions can be found here. Place them on an external hard drive.

  Once you are ready with the above steps, and if they have successfully completed, you are fully backed up and you can continue with the experience/test.

  Download the Advisor of Windows 8 upgrade from here and run it.

  It will scan your computer and if it is compatible and what needs to be changed before you move to Windows 8.

  Follow his instructions to fix what may need to be corrected. This could take some time.

  At this point, don't buy Windows 8.

  Check these instructions from HP on the upgrade to Windows 8 - Note that not all written inside is related to your case, but you can read to get an idea. Read the paths of upgrade of Windows 8 here.

  After that depending on your edition of Windows 7 current and according to your preferences, you must do a clean install of Windows 8 or to do an upgrade.

  You can download the free 90-day Windows 8 Enterprise Edition on Microsoft TechNet evalutional version - link.

  You will need to register using the Microsoft account - it will provide you with a license key and a downloadable ISO image of Windows 8 Enterprise. On your own drive you should burn this ISO (double-click it) to make the installation of Windows 8 disc.

  When the installation disc is ready, use to make clean install Windows 8 or update install. Look at all the instuctions I provided. After installation of Windows 8 upgrade, or own, you should try to run Windows Update to ensure that it is up-to-date. If a specific driver is required, you can try to install the Windows 7 version - download it from here. You can restore your personal files from Windows 7 upwards you created earlier.

  Experiment. If this works fine, you can later restore to Windows 7 image, then buy a proper version of Windows 8 and perform the upgrade on the spot or other clean install.

  If this does not work and you decide to go back to Windows 7, boot from the Windows system recovery disk (created before - look above at step 2) and use the option of image recovery system to reimage the machine and return to the State of Windows 7.

  Instructions on this subject can be found here and here

  Good luck and happy testing!

• B1H40EA #UUW: cannot install Windows 10 USB and Windows 7 online

  Presario CQ57-400SO.

  I can't install Windows 10 from both usb and online.i once finished the installation process of void and he returned my system to the old program Windows 7

  Oh I managed to download Windows 10via usb, I think that I never had a driver hp support? Updates

• EliteDesk 800 G2: USB issues

  I am able to boot from USB key, in order to install Windows 7 x 64. However as soon as I get the: install windows 7 window (language to install, time and currency format keyboard or input method) USB keyboard and mouse do not work and I can't go any further.

  Any ideas will be appreciated, thank you in advance.

  Hello:

  Ether use a PS/2 keyboard and mouse, or you need to run this utility Intel USB...

  There is a Readme file for instructions.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  I also assume that you went in BIOS and enabled legacy mode and disabled startup secure, correct?

  W7 is not compatible with secure startup.

• Already have a bootable Windows 10 USB, can I use it with Bootcamp?

  Already have a Windows 10 USB bootable. I converted to an ISO using an Apple Guide file. Bootcamp says:

  In addition, on Bootcamp it shows Windows 7 or later version instead of Windows 8 or later.

  1. Please make sure that your USB Installer is not an installer 32-bit/64-bit mixed. If it is greater than 4 GB, it's a mixed Installer.

  2. Please download an ISO 64-bit of the https://www.microsoft.com/en-us/software-download/home for your desired version of Windows. You may need your product key for Windows 7.

  For Windows 10, MD5sum values

  OpenSSL md5 Win10_1511_English_x64.iso

  MD5 (Win10_1511_English_x64. ISO) = a0d4271b7537732a060909fd39d54829

  OpenSSL md5 Win10_English_x64.iso

  MD5 (Win10_English_x64. ISO) = 23e397a21a9e01f141c64b7e1260314a

• How can I download photos in Gallery windows on USB microphone please

  HOW CAN I DOWNLOAD PHOTOS IN GALLERY WINDOWS ON USB MICROPHONE PLEASE

  HI Margaret Winwood.

  There is no way to directly copy the photos from Windows Photo Gallery into the micro USB drive.
  You will need to manually copy the pictures from the original location of the pictures on the computer, and then manually copy into the microphone connected to the computer player.

  Try the following steps to copy photos in the micro drive.

  (a) right click on the photo in Windows Photo Gallery and then click Open file location.
  (b) now right-click of the photo, click on copy, then open the Windows USB drive and paste it.

  Windows Photo Gallery: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

• Cannot install Windows 7 USB

  When you try to install Windows 7 USB, I get the following message:

  "Setup could not create a new partition or system to locate a system partition. See logs of installation for more information".

  I'm trying to do a clean install of Windows 7 on my new laptop that does not have an optical drive, so I have to use a USB key. I read on the forums countless that USB is the problem - Windows 7 will not install with a connected USB drive, because blah blah can't install on a disk that can be removed. Or something. Only I do not want to install on the USB. I'm installing FROM. So I HAVE it up.

  How can I fix it?

  Hi TheOneGuy,

  Looks like you did some research, so I apologize if it is redundant.  Did you see the next post?  It is quite similar to your question and has a possible solution:

  http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to format my USB after making it bootable with Windows 7 USB/DVD Download Tool

  I used the Windows 7 USB/DVD download tool to make my bootable usb key. But now I can't format it. When I open my computer and connect my USB it is shown as a cd. Also when I go into disk management it is shown that two disks hard each of them Go 99,76 and a CD-ROM that has 1123,13 GB RAW. I've tried a few programs for formatting, but they say that it is protected against copying. Is it possible that I can use as a normal USB again?
  Thank you very muck for your help.

  Hi mifocc,

  ·         What is the brand and model of the USB?

  Check if there is no slide switch on the side that provides protection against Scripture. This spectacle of a lock closed and open on each side.

  I suggest you follow these steps.

  (1) Insert the USB key into the USB port.

  2) click Start, type devmgmt.msc in the search text box and press ENTER.

  (3) find hard drives and expand it.

  (4) find the USB flash drive you want to format, and then double-click it. He opens the Properties dialog box.

  5) click on the policies tab.

  (6) the default option optimize for quick removal of the selected options, put it to optimize for performance, and then press OK.

  (7) now, open computer. Right click on the USB Flash drive and select format. The Format dialog box will now appear.

  (8) in the file system field, select NTFS.

  9) Press Start and wait while the process will be completed.

  You can also connect the USB on a different computer and try formatting.

• I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers.

  * Original title: drivers

  I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers. help please?

  What drivers?

  Your hardware such as a video card may require pilots. Only you know what is in your version of the computer.

• Why I can't install Windows 7 USB DVD Tool?

  Hi, I am located in Sweden and recently bought premium to the home page of Windows 7 on the Windows Store Web site.

  I chose to download the file to .iso formats the hard drive.

  Then I was told to download Windows7, but just after full download USB-DVD tool and I try to install it, nothing happends.

  Restarted my computer and everything but nothing helps.

  I am currently under overcharging Windows Vista Home 64 bit and Windows 7 64-bit.

  Don't seem to find and sollution to my problem and really want to help.

  Tried to redownload the tool USB-DVD of windows 7 but still, nothing happends.

  Kind regards!

  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Install Windows 7 from USB drive/key
  http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• Windows 7 USB/DVD Download Tool > > I can't clear it

  My problem is the same title.

  Well, I delete it, but it is still on my Uninstall list
  I erased the with Revo Uninstaller, using the more complicated method
  (which deletes the unwanted file that are left)
  After this, I check Revo Uninstaller, so I can't erase another program
  but I found the windows 7 USB/DVD download tool exist (on my list)
  and I restarted and it has not disappeared... :(
  So, I installed again and deleted with its own uninstall program.
  But same result...
  
  How can I get rid of this?
  This is nothing but boring 4 person try 2 grant access to his computer...
  Hello
  
  Please follow the steps to uninstall a program from the registry:
  1. click on start, run, type regedit in the Open box and then press ENTER.
  2. Locate and click the following registry key:
  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall
  3. After you click the uninstall registry key, click Export registry file on the Registry menu.
  4. in the export registry file dialog box, click Desktop in the save box, type uninstall in the zone file name and then click Save.
  5. each key under Uninstall represents a program that appears in Add/Remove programs. To determine which program that represents each key, click the key, and then view the following values:
  DisplayName - the value of the DisplayName key data name listed in Add/Remove programs
  - and -
  UninstallString - the value of the UninstallString key data the program that is used to uninstall the program
  6. After you identify the registry key that represents the program that is still in Add/Remove Programs, right-click the key and then click on remove.
  7. Once you delete the key, click Start, point to settings and then click Control Panel.
  8. in Control Panel, double-click Add/Remove programs.
  9. in Add/Remove Programs, verify that the program for which you deleted the registry key is not listed.
  10. If the program list is not correct in Add/Remove Programs, you can double-click the Uninstall.reg file on your desktop to restore the original list of programs in the registry.
  11. If the program list is correct in Add/Remove Programs, you can right-click the Uninstall.reg file on your desktop and then click on remove.
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry 

• After you use Windows 7 USB/DVD download tool it says it was created ok, but USB is now in XP or Windows 7, nothing in diskmanager either! Help

  I just bought a 16 GB USB that seemed very well, ok with the image I did that I started the Windows 7 USB/DVD download tool that he says have been created, but now after unplugging the USB, it is found under XP or is back on my Windows 7, nothing in diskmanager! Help

  It is as if windows does not recognize the device in all machines, no prompts or messages appear

  The tool is designed specifically for image ISO of Windows 7 and 8 not others.

  While this is not supported, this blog describes a way of jobbing it to work with the other ISOs [and also explains why it does not work this way normally]

• ThinkPad X 220 clean install problems (Windows 7 USB/DVD Tool)

  Hi all

  My apologies if this has been answered before (I searched through the forums of viable solutions).

  I tried to format my hard drive on my laptop Lenovo Thinkpad X 220 and perform a new installation of Windows.

  Since my laptop doesn't have any CD player, I went to download a Windows 7 .iso file professional hoping to use it as a

  bootable USB tool.

  Extract the file .iso on the USB port, went into the BIOS and choose USB, but in vain.

  Decided to download the exe tool Windows 7 USB/DVD with the .iso file I always had, but eventually received this message:

  

  After a bit of searching on Google, apparently there is a bypass to this by changing the file .iso of UDT (However the .iso file I had was already ranked UDT).

  If anyone has had experiences with this, I'd love to hear your comments or advice.

  Hi Hiro,

  I think I downloaded the two files .iso on this site here which has the same links.

  Looks like .iso files are corrupt (I've heard some people sometimes had to re-download).

  I looked for alternatives and eventually found one that worked.

  Thanks for the help.