Windows 7 will not restart after an installed cleaning

Similar Questions

• Satellite P850 - Windows 8 will not restart properly

  Does anyone know why Windows 8 will not restart correctly on the laptop Satellite P850?

  It seems that whenever I have to restart, especially after the installation of an update, it crashes right on the screen of "Reboot" and I usually find myself having to hold the power button down to completely stop and then turn upwards again. Sometimes, I still have to do to make it stop.

  I would be very grateful for any help that anyone can give me please.

  I have no idea why the Windows 8 will not restart correctly, but this document should help you to repair or restore the system of Windows 8 on your Satellite P850

  + Windows 8 recovery & Repair +.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Please post comments if this helped and how you can solve this problem!

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• The Explorer will not work after you install Office Jet 4500

  Hello

  Can someone tell me why my windows Explorer does not work after installation of my printer Office Jet 4500 wireless?  I am currently using windows vista.

  Thank you

  Go to a command prompt.

  Type sfc/scannow and allow to run the System File Checker. Restart your PC to see if Windows Explorer works.

• just paid for photo shop, items online and it will not open after I installed

  just paid for photo shop elements and it will not open after installation

  CC applications close immediately after the launch

• Windows 8 will not start after installing Windows 8.1

  I have laptop with Windows 8 on the drive (C :), I installed windows 8.1 on drive (d). When I want to choose Windows 8, it didn't start!

  There just restart and ask me to choose again.

  I tried "automatic startup repair" with the DVD but it did not work, I tried this command also:

  Bootrec /FixMbr

  bbootrec /fixboot

  bootrec /rebuildbcd

  Hi Michael,

  I would be grateful if you could help me with more information.

  1. What is the error message accurate/complete that you receive when you try to start Windows 8?
  2. Are you able to boot to Windows 8.1 without any problem?

  This problem can occur because of bad sectors on the hard disk. I suggest you run the disk check and check if you can start Windows 8.

  1. Press the Windows key + X, click on (Admin) command prompt.
  2. At the command prompt, type chkdsk /f and then press ENTER.
  3. Now, type chkdsk/r to repair.

  To run the check disk on C drive, try the following steps:

  1. Press the Windows key + E to open Windows Explorer.
  2. Click the drive you want to check (C :).
  3. Click Properties andcclick on the Tools tab.
  4. Click the control button user error checking.
  5. Follow the on-screen instructions.

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Windows Vista's Aero theme will not work after you install a major update and reboot into Windows Automatic Update, can I fix?

  Update: Windows x 64?

  After I did a reboot the theme changed to Standard or Windows Classic theme.
  When I try to change the theme back there is no preview on the window and when I try to apply the theme, there's just the same thing.

  Hello

  also try to go to your site in manufacturere graphics or computer cards and find the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  You may also like to change how you receive updates for do you download this update problem still through automatic updates

  for any update you don't want to, make a right click on it and hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need or who have limited access to internet

• Windows will not restart after running updates.

  The last 2 times I ran the updates my computer will not re-start automatically.  Blue screen appears with the message indicating that Windows has been arrested to avoid damaging the computer.  If the first time screen seemed to shut down and restart.  Then a message says that if a software or a hardware had been recently installed must be removed. Why Microsoft Webcam has been reinstalled during execution of updates that I don't know.  Running updates the problem or software for this webcam?

  The last 2 times I ran the updates my computer will not re-start automatically.  Blue screen appears with the message indicating that Windows has been arrested to avoid damaging the computer.  If the first time screen seemed to shut down and restart.  Then a message says that if a software or a hardware had been recently installed must be removed. Why Microsoft Webcam has been reinstalled during execution of updates that I don't know.  Running updates the problem or software for this webcam?

  Hey RetREMF

  We cannot say what update is the cause of the problem

  one thing that you should never get 3rd party drivers from windows update hardware

  Find them directly in the hardware manufacturer's Web site

  I suggest that change you how to receive updates to try to find the exact problem, we by installing one at a time

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need or who have limited access to Internet

  Walter, the time zone traveller

• Windows 7 will not activate after a clean install and several improvements to my computer.

  I bought a copy of Windows 7 Home Premium 64-bit.  I installed my old hardware running, but found Windows 7 either too many resources.  When there was enough money kicking around to upgrade my computer a few months later I did (new card mother cpu and ram).  Windows 7 would not start normally or in safe mode, my old installation of XP would not boot normally but would start in safe mode.  So I reinstalled Windows 7 with a clean install (reformatted my hard drive) and it works fine but now it won't turn on!  It says that I have to type in a different product key because I typed the product key cannot be used to activate Windows on my computer.

  I understand the need to fight against piracy, but the thought that I can't upgrade my computer without having to buy another product key is ridiculous!  There are solutions to this problem?

  Activate manually.  It is detect your previous installation and seeing this as an attempt to install the product on another computer.  It is a common phenomenon.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate the operating system.

  I hope this helps.

  Good luck!

  If this does not work (these procedures are for Vista, but I guess they will work with Windows7), and then republish your questiion in Windows7 Forums:http://social.answers.microsoft.com/Forums/en-US/w7install/threads where they can provide the procedure for this OS if it is different.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows xp will not update after re-formatting

  I have a windows XP. I restored my computer back to factory new and now I am unable to load updates. I tried to loaqd SP1, SP2 and SP3. None will not load. You have a solution?

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section on your service pack level
  • Also, take note of your computer processor type: section

  What is your current level of MS?

  What is the brand and model of your PC and what type of processor?

  Where did you try and get service packs to? What happened when you tried "load" them, and what do you mean by 'charge', download or install?

  Best place to download SP2...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  Best place to download SP3...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  But do not install right away, answering the questions above for more guidance.

  Tricky

• Windows Installer is GONE. Please help me. My computer (windows Vista) will not be updated or install anything. I looked at microsoft, and there are no drivers that are obvious to me.

  I think I did too many updates at the same time and it has messed up my Installer.  I ran 3 virus different scans so I'm sure that this is not a virus.  Looking for drivers from microsoft and nothing.  I'm really frusterated with this one.  If you need information, just send me an email to * address email is removed from the privacy *.

  Hi webchikk61,

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  For reference:

  You cannot install some programs or updates

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

• Phone of blackBerry Smartphones will not restart after the installation of new app

  Just install the free application PAndas vs Ninjas and now my phone does not restart.  Goes half way thorigh the process and then restarts.  Ive removed the battery then reinserted it but no change.

  Any suggestions? !!

  You are able to reboot your device in SafeMode as shown in KB17877?

  I guess, because it is taken in a reboot cycle, when you connect to the desktop software it does not have a stable connection to reinstall your software?

  If this is the case, remove the battery and keep it off when you connect to the desktop software. You will get a pop up that the device cannot connect and there should be buttons retry, update and cancel. Select Update and you will then be able to reinstall the latest version of the device software.

  When the load progresses, you will see a step that says "waiting for initialization of the devices '. At this point, insert the battery and recharging must complete.

• Windows Vista will not activate after I reload.

  * Original title: Windows Vista

  Hi, I had to reload Windows Vista on my laptop that has been loaded correctly. My problem is that it will not activate its telling me the code and I need to get another.

  This software is used only on my laptop so why wont he accepts the code, can someone help me with this please?

  Thank you

  Hello

  Do the activation of the phone and hold on to explain to a real person it's a reinstallation on the same laptop you do.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.