Windows 7, with Asus USB-BT-211 and Sony DR-BT50

Similar Questions

• installed windows xp with a usb flash drive and it says plugin.ocx is missing

  recently, I tried to re - install windows xp to format my hard drive and evrything was going well until he says plugin.ocx was missing. now I can't complete installation and my computer is absolutely useless. I used a program called wintoflash to make a USB bootable cd-rom image. to my knowledge wintoflash uses your existing windows installation to do this. I tried to download plugin.ocx and place on the drive hard usb, then the installation says that's not a valid windows image... Please help!

  so bad I has not successfully copied the disc of windows through wintoflash

• Sony DR-BT140Q with ASUS USB-BT211 on Windows7

  Having problems become headset Sony DR-BT140Q to work under Windows 7 (using ASUS USB-BT211 dongle) after completing the discovery.

  Before plugging in USB - BT211 ASUS, I installed with the utility or driver of reboots CD Windows7. After starting, I plug in the ASUS USB-BT211 and he finishes the driver installation. I right click on the icon on the taskbar start Windows7 and add bluetooth device... he finds it and he finishes the installation... but never gives me a windows dialog box enter the Sony DR-BT140Q.

  Sony DR-BT140Q has a passcore by default, but I can't seem to find the windows dialogue that will allow me to enter the password. After several minutes... just headphones turns off to save batteries.

  Yes, I've scoured the web to find only small pieces of info.

  Yes, the pairing code is 0000 for the DR-BT140Q. Asus Bluetooth dongle seems to be recognizing the headset from your description - you should see "DR-BT140Q" in the dialog box. If the software does not go as everything in the check of the aircraft to see if there is a matching software to refresh on the ASUS support site that is specific to your version of Windows 7. Try pairing the headset with another device like your phone to see if you still have a problem. If you are still unable to pair the headset Sony support a call and they will be happy to help you:

  http://eSupport.Sony.com/us/Perl/suppor... l = DRBT140Q

• How can I install Windows XP with my USB?

  I tried to install winxp with my USB. I used to copy the contents of the cd to my USB software wintoflash. then I tried to install the operating system. It has worked well. It shows the instructions as "1 text mode setup 2nd gui mode setup + 1 start windows" it's education that I got. and installed the operating system. According to the guidelines I tried and installed the operating system, after I've changed the first boot device as my local disk and I got the error msg "error loading operating system". then I changed the boot sequence to my USB stick, by doin so my laptop works very well. but without the USB, it says error. I can't find where I have error. (my laptop starts only with the USB key)

  original title: installation of Windows XP with a USB key.

  Hi Arjun Mcs,

  ·         What happens when you change back to normal boot sequence?

  ·         Are you able to see the files in the USB key?

  Answer with the information required to help more.

• Driver problem with prolific USB-to-Serial and Windows 7 connector

  I'm trying to connect a UPS to PowerPanel to my new ACER computer with 64-bit Windows 7 via a prolific USB-serial connector software. The convenience store says he has a driver problem the convenience store is unable to correct. However, messages also said that my driver is up to date and the device working properly. I have installed, uninstalled and tried to fix several different drivers, run the troubleshooter, etc.. I tried to run the stand-alone Windows Installer, but it says "not compatible with your computer." Help! Is there anything else I can try?

  Hi Mary,

  Until solve us the problem we need more information on the issue.

  ·        What is the exact error message that you receive when you connect theprolific USB-serial connector to your computer?

  ·         Could you plug the connector on the computer as soon as possible without any problem?

  ·         What is the model number of the connector?

  ·         The ups and the computer manufacturer and what is the model number?

  ·         Who is the stand-alone Windows Installer you tried to install?

   

   

  You can first check if the USB connector to prolific series model if its compatible with windows 7 Access the link below to check the compatibility with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also contact themanufacturer prolific USB-serial connector and check if the device is compatible with Windows 7 and if you need to install any other drivers to get the device to work.

   

   

  Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the USB ports, coast and Bluetooth in Satellite A100-237

  Hello, I own a laptop Satellite A100-237 and I have an annoying problem for quite a while now. The two USB ports in the side as well as the Bluetooth device will not work. What is the bluetooth device is it is simply not recognized by the system, as if it wasn't there (it is said the installation of the driver too) while any device I connect to USB ports side does not work either.
  The other two USB ports in the back work very well.

  Hello

  Maybe this two ports are really defective, and there is not much to say. You will get your laptop for repair, or you live with it and use the other two USB ports. Sorry, but I see your ad as a report short and not as some to ask for help.

  Bye and good luck!

• Reinstall Windows 7 using a USB Flash drive and an ISO image

  My laptop is not an optical disc drive in order to reinstall Windows, I had to rely on the USB that I have. I downloaded an ISO image of the operating system on the Microsoft site and created a bootable USB stick using the xcopy command in command prompt. When I restarted the system and chose the USB as a boot device, nothing happened for half an hour. Then I had to reboot the PC somehow and it booted normally. Since he did not work once again, I downloaded the Windows 7 USB DVD download tool. But even the tool cannot complete the writing process, even after several attempts. So as a last attempt, I opened the folder where I had extracted all the files and ran StartCD.exe but it terminated immediately by posting "too big for memory. (BTW, I use a 8 GB flash drive) What should I do to fix this?

  Use Rufus:

  The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

• Networking Windows 7 with XP using the router and no internet - machines cannot be

  Hello

  I searched the web and tried all kinds of suggestions to do this, but my new Win7 machine does not always show my daughters XP machine, and vice versa his XP machine is not showing my win7.

  I don't want to have access to the internet so currently have my machine win 7 connected directly to my hub blank so that I can access internet from my win7 machine.  I then another connection from LAN port on my Win7 machine to the router which is also connected his XP machine.

  In my networks and sharing on Win7, I see my homegroup network, which has access to the internet.  Then the other network to the router shows as "unidentified" and the public, but I am unable to change anything on this subject? So can't make a working group or at home.

  The XP machine has also recognized the network and created a shared folder for its own files, but nothing for the win7 machine.

  Both seem to recognize the router and network, but not each other.  Am I missing something?  If it makes any difference, I've already named two machines with the same workgroup name.

  Is anyone able to offer advice?

  Any help is appreciated.

  Thank you

  Vicki

  Hello!

  First you must make sure that the two PC's on the same workgroup. Just checking if they have the same subnet mask. And finally make sure you works discovered the network on Windows 7 PC.

  If computers are subnet masks different IP addresses, they will not be able to see each other.
   
  That I understood your message, you don't want to not PC your daughter to have access to the internet. You can assign static addresses of daughter and your computers. Try to do this:

  1 assign to computer on Win XP LAN network card public static address 10.0.0.10 and the subnet mask 255.255.255.0.  To do this, go in Control Panel > network connections, choose the connection you must edit (the one that goes to the Windows 7 computer) and click Properties. In the windows that opens, double-click Internet Protocol (TCP/IP). Then choose use the following IP address and fill in the fields with the information above.

  2. the PC Windows 7 go Network and Sharing Center > change the settings of the card and double-click adapter that connects the computer to Win XP. Click on Properties and Internet Protocol Version 4. Then choose use the following IP address and put 10.0.0.11 subnet mask 255.255.255.0.

  3. on the Windows 7 PC to go network and sharing Center > advance change sharing settings. In the public profile check turn on network discovery.

  4. make sure that both computers are on the same workgroup (important)

  After completing these steps computers must be able to meet and communicate.
  Hope this will help. Please let me know the results!

• Has no Windows updates with error codes Vista: 80070641 and 641

  Using Vista Home Premium 32-bit. Have not been able to install updates for the past week and the error codes I get are not listed by Windows. It comes to 80070641 and 641. Is the computer safe to use?

  Mike in Maryland

  Hello

  1. What is the number of KB (Knowledge Base) for the update of Windows?
  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: run the Microsoft Fixit and see if it helps.
  http://support.Microsoft.com/mats/windows_update/

  Method 2: perform the steps in the article mentioned below and see if it helps.
  http://support.Microsoft.com/kb/818018/

  Hope this information helps.

• XPS 15 9550 CPU speed is as low as 0.75 ghz after manually installed windows 10 with all the drivers installed and BIOS updated

  I just bought this XPS 15 9550 in January, and I really appreciate it at first.

  However, one day, as pushed microsoft update to 10586 version of windows 10 and the machine will always fail to install the update, so I decided to download the image file and install it myself.

  The installation went smooth, but after a few days use, I found the computer is very slow during playback of videos and games and I came to find the speed of the CPU shows the label of performance in the Task Manager always will be 0.75 ghz and 0.78 ghz. He cannot go above that. I also found that the use of the CPU cannot exceed 30%.

  I've already updated my BIOS to 1.1.19, reinstall the system, a few times, choose the battery mode high performance, etc and this does not help.

  I also downloaded the power of intel and found gadget for my processor power consumers are still weak and the speed of the CPU is always not 0.80 ghz.

  In addition, I encountered the problem that after plugin the AC power, the speed of the CPU will fall to 0.39 ghz...

  Someone at - it an idea of what is happening here and how can I solve the problem? I'll really appreciate it. Thank you.

  I had my problem is solved. Follow these steps:

  1. download gadget power intel, you can search online for it.

  2. check the power of your CPU (package pw...) rate and open the videos and applications that will constantly consume the CPU power. See if the power is still weak.

  3. If the power is still weak, try to update your BIOS (download dell drivers and the new version should currently be 1.1.20) and see if things are getting better.

  4. If the power is still low, you must contact dell technical service to replace your hardware (my computer has replaced the northbridge, southbridge, I forgot, but after replacing, the CPU works fine)

  Note: If you run games using your discreet graphics card, such as starcraft II and you found that it's extremely slow, it is possible that your cpu is capped.

• Whenever I close any microsoft windows opens with, there is a problem and leaves the program, I'm on. WHY

  Let me know how it can be fixed thanks

  Hello

  1. what operating system do you use?
  2. What is the full error message?
  3 did you hardware and software changes before the show?

  Please provide comprehensive and relevant to the issue so that we can better help you. Please visit the link below and repost your request.

  How to ask a question:
  http://support.Microsoft.com/kb/555375

• Question - the upgrade with 3 USB card and esata

  I have an early 2008 Mac Pro Quad core 2.67 going to have maxed out RAM soon and are planning to get a couple of 2 TB seagates Macgurus. I'm a little embarrassed by my lack of knowledge, but I'll put my questions over there anyway. Last year, I bought a 120 GB ssd card Accelsior PCIe mercury OWC - not being aware of the s and outs of things, but I knew it wasn't a port multiplier with two external esata ports. so my question is this: since I have to live with this card can I connect the esata ports to discs in separate outdoor pens and then through disk utility make a raid 0 set, and what size of disc must be effective for the cost the least?  I intend to get a USB 3.0 also so that I can use this speed also.  My other plans must be a drive of fusion with the ssd 120 on the map of Accelsior with a disk of 1td existing in my drive for the system Bay and replace all small readers of seagate more big HARD drive and I'm wondering if the 2 TB is the largest capacity I can use internally. I am on a very limited budget so that's the reason why I'm thinking hdd and if there is someone with advice on a card USB 3 I would appreciate your comments - in fact, I would be happy to comment on everything I mentioned, I'm a little out of the loop on the evolution in recent years. It is possible to configure a raid with two disks of two PPI crd esata ports would there be an advantage with drives of 2 TB or 1 TB disks would work as well for raid 0. Do I intend to put in storage for Time Machine with the USB 3 map, and what size disc would be appropriate for Time Machine? I'm not lazy and waiting for someone to find out - I did weeks of research to get to this point and I just need a little advice. I'm just going through what I know and what I can afford, but maybe I'm missing another solution to try to get a little more speed and back up storage for my photoshop files.

  I do only cc2015 Photoshop, Lightroom and On1software version 10.1 using OS X El Capitan and a cg 276 Eizo monitors more a second older Eizo. My usb ports 2 are all used and I rarely use a firewire port. Thanks in advance to all those who have advice. This is the first time that I have not posted anything on this forum

  Time machine is a USB 2 connection. No real reason for a USB 3 connection.

  There is no RAID in disk utility in El Capitan. Apple dropped the disc utility in El Capitan. However, you can still the Terminal commands to configure RAID.

  https://www.reddit.com/r/OSX/comments/3d7aw2/does_el_capitan_disk_utility_suppor t_raid.

  You should be able to create a set with eSata RAID

  Here is a map of the BSE 3 compatible with El Capitan.

  http://www.sonnettech.com/product/allegrousb3pcie4port.html

  USB 3.0 Mac Pro 2008 El Capitan

  Make sure that the card said it works with El Capitan. Some cards USB 3 is no longer with El Capitan as the CalDiget of first generation card.

  Internally the Mac can also use large HD depending on availability. However, there is a bug that first appeared in 10.8.4 and has not yet been set. To format a plu 2.2 to internal HD:

  -Use a disk utility of all Mac OS X older, including the 10.6 DVD (if your Mac can boot from it) or any of the installation DVD player or boost saved work.

  -Another solution is to move this drive in an external case and delete it there (assuming your case is modern enough to deal with readers more than 2.2 to.

  In addition,

  To sled mounting internal:

  The penetration of the screw depth for 'down-screw mount adjacent to the platters' on some readers from over 3 TB have been shortened. This may mean that the live sled down until they adjust and begin to compress the washers on the sled. If this is the case, your drive will not rest flat on the sled and do not breed with the connector backplane without additional adjustment.

• How can I set up separate e-mail folders in Windows Mail to two companies each with its own email address and the password?

  We use Verizon as our ISP.  I was getting our email to two different companies by connecting to Verizon in with another user name and password for each company.  However, we have received messages in our email that we were almost our quota and customer emails we would not come through and have been having rebounded.  I spoke with Verizon and learned to use a 3rd party to channel messages and thus free up space from the server.  They helped me to set up the email to go in Windows Mail, but now all the email for both companies will in the same e-mail account.  How can we separate the email for both companies so that each company can log on to Windows Mail with their own separate IDs and passwords?

  See this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   

• We can install 32 and 64-bit Windows 7 with a license on 2 computers?

  I bought windows 7 with 2 bits dvd 32 and 64 with a single product. If the software can be used in two computers, one with 32 bit and... everythink with 64 bit

  I bought windows 7 with 2 bits dvd 32 and 64 with a single product. If the software can be used in two computers, one with 32 bit and... everythink with 64 bit

  Hello

  You can install the 32-bit version or 64-bit on a single computer.

  You cannot use both versions at the same time.

  Concerning

• Re: Cannot start with driver USB Satellite A40-271

  Hello

  I have a Toshiba Satellite A40-271 and there was a problem with windows and I can not start, so I decided to start with linux. I tried once with a cd and it worked perfectly, now I try with a usb flash pen and it does not work.

  Can someone help me?

  Hello

  As far as I know the Satellite A40 is very old model laptop and I think that the BIOS does not support booting from a USB flash memory
  I know it of possible to start the USB FDD drive