Windows 7 with SSD crashes when ideling left, but restarts and works fine

Similar Questions

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 freezes or crashes when on google chrome

  trouble with freezes & crashes when I go on the internet with google chrome...

  trouble with freezes & crashes when I go on the internet with google chrome...

  =================================
  The following link might be worth a visit:

  Google Chrome help
  http://support.Google.com/chrome/?hl=en

• EPA 11, in an ongoing project (45 min. of material), expert opinion, active project Panel is empty!, if I Add Media to my project Panel files open but it is empty. This has happened with no cure 2 days ago. Yesterday it worked fine. Today is not w

  EPA 11, in an ongoing project (45 min. of material), expert opinion, active project Panel is empty!, if I Add Media to my project Panel files open but it is empty. This has happened with no cure 2 days ago. Yesterday it worked fine. Today, it does not work. I closed and then open the program several times now without success. Active project Panel is non-existent (empty so that I can"move my project.) Help, please!

  hankholmes

  What operating system is involved?

  If Windows 7, 8, 8.1, or 10, please remove the Adobe Premiere elements prefs file.

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  11.0

  and in the 11.0 folder is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the entire 11.0 the folder in which the Adobe Premiere elements Prefs file exists. Don't forget to work with folder Option show hidden files, folders and disks enabled so that you can see the full quoted path.

  What is the duration of your project, when the problem is? You have the same problem if you open a new project? Where are your stored source media, and do you get coloured poster of the Offline Media in the open project (in thumbnails active project or in the content of the timeline)?

  For any question or need clarification, please ask.

  Thank you.

  RTA

• None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have. How can I fix this?

  None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have.

  How can I fix this?

  I use the SHIFT + F7 work much and would really appreciate help in getting up and running.

  Thank you

  Check if you have an F LOCK key in the top right of your keyboard.

  If this is not the case, try a system restore:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine.

  Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine. It must be a sequence of keys... but I have no idea what it could be. Thank you and God bless you

  Hello
  When exactly the problem occur?
   
  Follow the steps below and check if that helps.
   
  Step 1:
   
  Test the issue in safe mode and check if the keyboard is blocked.
   
  Step 2:
   
  If your computer very well in Safe Mode functions, you can put your system to boot and check if any third party or any service application is causing the problem and therefore the computer to freeze.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.
   
  Once the system is in a clean boot state, check if the computer continues to block or not.
   
  See the link below for more details:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have a problem with the mouse cursor moving left to right and not conversely when switching between screens.

  Original title: change the direction of the mouse moves from the main screen to the external monitor

  My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change

  Hi Jayson Bourne,

  Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  Change the settings of the mouse

  Method 2: Update the latest drivers/software for the mouse.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Window Popup with strange characters when you want to play music from the cloud

  When I try to play music on the cloud (music downloaded on my computer), I get a popup with some strange characters. It was working fine 2 days ago. Nothing has changed on my computer. I tried uninstalling iTunes and reinstalling. Shows the problem. Any help would be appreciated.

  This is what looks like the pop-up window.

  

  PS - all anti-virus software are up and running.

  As an addendum, I tried to download music (by clicking on the cloud icon, which then shows an arrow pointing downwards). This popup has shown once again.

  Then I thought maybe it was having a problem with my account or my computer don't think she was allowed. So I checked my account login, and I was connected. Then I tried allowing my computer and this popup appeared again. I then tried my scroll wheel and it seems that it is a right screen. I guess that is the lower right button 'accept' but I'm not confident in the present.

  Strange things brewing.

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Windows Vista Media Center crashes when I change the channel

  Original title: Windows Vista Media Center

  Since the beginning of June whenever I try to change the channel on the TV tuner in Media Center it crashes. I tried to do a system restore but restore never worked on my count. Problem event name: APPCRASH. Application name: EHShell.exe I'm looking for suggestions that might solve this problem.

  1] updated TV Tuner card driver. Visit the manufacturer's Web site and download and install the latest driver.

  [2] delete the file mediaCenterDataStore.db. By default, this file is located in the following location:
  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
  
  Delete: -.

  Start > run > type in %SYSTEMDRIVE%\ProgramData\Microsoft\eHome\mediaCenterDataStore.db > OK.

  Locate mediaCenterDataStore.db and right-click on it, select Delete.

  Restart the Media Center.

  S.Sengupta Media Center MVP

• Windows 7 RC crashes after installed updates. Initial Setup works fine.

  Everyone knows about system crashes after installation of microsoft after a successful Windows 7 updates installed.  I would like to point out that the installation of the operating system is going very well and there seems to be no problem, another that I have a found unknown device that is not described here until you go into system properties.  When the windows update notification is in place there are usually 7 updates important and 36 optional updates.  Optional updates include drivers for the video card and other drivers and also a Toshiba ACPI value-added product for the General and logical devices.  I don't know what it is because I can't find any information about it.  It is not really important at this stage because everything hangs!  I had this problem since the beta version and it is still not resolved.  I have read and tried to fix this with "accidents of the Explorer of windows 7 after update" using the Microsoft fix by regedit keys.  It did not work.  I also tried various updates one at a time to see if it has an impact, without success.  I tried to go to the Toshiba website for updates, but so far there is none.  I continue to read the forums and also sent food to Microsoft beta on this problem.  Someone can help me.

  System Specs:
  Toshiba phone L355D-S7829
  AMD Turion x 2 dual core mobile RM-72
  4 MG RAM
  ATI Radeon 3100 Mobile graphics card Shared
  Dual-boot system: Vista 64/Windows 7 (64-bit) RC

  System works fine on Vista and as long I don't upgrade anything, Windows 7 works very well.  Software installs works very well as long as they do not require a video card update.  I tried to use the video driver for Vista and it still crashes.

  If I can offer any other information I can be set aside, please let me know.

  Thank you!

  James

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the Windows 7 Forum.

  These Forums you are in are to help posters with the problems of Vista.

  Windows 7 questions should be directed to the place that above.

  See you soon. Mick Murphy - Microsoft partner

• After effects crashes when switching between applications (Mac) and After Effects does not start after you enable journaling

  Hey there,

  When to (for example), Illustrator and AE program seems to have a greater likelihood of crashing. I was not able to determine exactly why this is happening.

  I often copy - paste forms of AI in AE, but it is not always plant AE. It could be the speed with which I switch between programs, but I'm still not sure about this.

  In addition, it breaks the audio driver somehow and Spotify (running in the background) stops playing. Restart Spotify corrects this problem.

  AE crashes and is often frustrating. I sent Crash Reports, but so far no help.

  I just activated registration--which has also caused some AE to fail. This time when (re) launch the program. It wouldn't start, but also did not highlight as suspended in the Force Quit of OSX dialog box. She would not answer Force closes and hung my system when I tried to reboot. You had to manually restart my Mac Pro.

  Well, variable time!

  Mac Pro (end 2013) 3 GHz 8-Core

  64 GB of ram

  OS X Yosemite (10.10.2)

  After Effects CC 2014 with the latest updates

  Illustrator CC (not 2014) same with the latest updates

  He does not behave like that on my iMac at home.

  Any advice would be (very) welcome at this time.

  Huh! I should have checked the settings correctly. It is a facility relatively new compared with at home.

  Solution: Check that there is enough RAM available for other programs.

  In addition, light AICB could do the trick, too. But I suspect that the latter has a much greater effect.

• CS4 crashes when I send to print and pen tool loses the ability to maintain a multi striped line attributes.

  With the help of Illustrator CS4 (impossible to pass because the office that I contracted does not level) on a Mac under the Mavericks 10.9.5 (just upgraded to 10.6). CS4 crashes when I send to print (I was save as PDF and print only). In addition, the pen tool loses the ability to maintain a multi striped line attributes.

  For the second, deselect new Art has basic appearance in appearance (small triangle in the upper-right) Panel dialog box. With regard to the other you tried to delete and time the printer to your list of printers? In addition, since nothing sooner than CS6 has been tested with 10.9.x, the PDF method can be your only hope.

• I got 15 major updates that neede says windows must be installed. When I tried to install and check the recent update file, almost all of them FAILED. The error message was: Installation failed, error 80072EFE. Any ideas? __

  Failed installation error 80012EFE

  If you are referring to the Security Center window, it isn't what you think it is. See http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Security-Center

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  If you please note that a repair installation (upgrade AKA on-site) will NOT fix it!
  
  See http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Note: When you reinstall Windows, McAfee free trial will be also reinstalled (but not valid, of course). To reinstall your current application of McAfee (purchased), use this three-step correction: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The menu label Muse with special characters when exporting html site, do not work

  I create a web site with a menu navigation Muse. In the menu (labels), I have some special characters (Portuguese characters) as a and i (official, noticias) c. When I export to html format in a folder this menu buttons don't work - html link - http://agml.pt/agmlteste/ . But when I save the temporary link Business Catalyst site - http://agml.businesscatalyst.com/ keys work well. Thanks for the help!

  The issue here is your host is not configured to serve the page with special characters names, but BC does not handle them correctly.

  Right-click on your pages and choose "Page Properties".  Go to the third tab, 'options', and clear the check box to use filename with the same name as the Page name.

  Use a file name that does not contain these special characters and it should work fine.

  See you soon,.

  Justin price

  Community Manager