Similar Questions

• Windows 7 would not connect this morning

  Hello

  I had just installed the latest version of the Toolbox Lenovo that has a check mark on the Toolbox icon in the taskbar, last night and just fully supported my entire system in the case of an accident or something else. When I turned on my laptop to check something before I went out some time for shopping, I just couldn't get Windows 7 to connect at all. He displayed the thing spinning next to the word "welcome." For now, I have my laptop home with me to do something, that you may know that I can do to get my back on the Windows 7 Desktop because I took it to a computer shop to have a guy check it out for me and see what happens. I didn't backup my whole system and stop for the night and then could not reconnect to all the next morning. My laptop runs normally until it gets to the screen of the user. That's when it gets stuck when I select my user account name. Any ideas why he does this? Just in case this happens again I should go in safe mode and go back to using system restore? I did not have any system restore points after I upgraded Lenovo Toolbox so I hope that the guy can make a comeback at the time what I have to do is to reinstall again. I wondered after this happened if I have restarted my computer after installing this update. I did not do anything, so I got a little scared to do something that might not work. Got work that needs to be done to a cousin and have my laptop to do, but have an old laptop that isn't mine anymore to me til I mine back.

  Thank you

  Liz

  So much worse... my Lenovo has virus and that is why it would not open a session. It is now correct.

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• Windows 7 do not connect the wireless network adapter

  When in Device Manager it is k o workining with all installed software & advance mode: saying activated

  OM

  Original title: windows 7 do not connect the wireless network adapter when in Device Manager, it works with all installed software & advance mode: saying activated

  Hi omsaini,

  Thanks for posting your query on the Microsoft Community.

  Sorry to hear that you have to connect to a wireless network adapter trouble.

  To help you further on this subject, it would have been really helpful for us if you had

  mentioned a few details such as:

  (1) is there an error message you get when you try to connect to the internet?
  (2) is the persistent problem with all browsers installed on the machine?
  (3) what is the brand and the type of the network adapter (whether ADSL or an adapter included)?

  However, there are a few steps that we can try first:

  a. the following link has a very good tutorial on how to install a network adapter on the computer:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/networking/install-wireless-network-adapter
  (Note: the link is for Windows XP but works for Windows thus 7\8)

  b. the following link provides a holistic approach for DIY difficulty on the connectivity of Windows:

  h ttp://Windows.Microsoft.com/en-US/Windows/Network-Connection-Problem-Help#Network-Problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  c. also, you can visit the following links as well:
        http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
  And http://windows.microsoft.com/en-us/windows/cant-connect-to-network#1TC=windows-7

  I hope this helps. Please contact us if you encounter any problem.

• M1536dnf - the installation program could not connect to your device. Check the IP address

  I recently bought a LserJet Pro M1536dnf for my business, then we would have network printing and scanning. We have both Mac and Linux PC with a single machine Windows solitaire which is kept away from the network for his own protection, and I expect from Linux but this is not where the problem is. Due to our network configuration, the only way to connect to the printer is by IP, not not using Hello. When installing using the installer of HP on the Mac, I choose 'Add intellectual property arrangements', enter the IP (192.168.1.247) and click OK. After that, he always comes back 'the installer could not connect to your device. Check the IP address, make sure that the device is powered, and then try again. "I know I can get to the printer because I can access its web interface in Safari. I tried to reset, update firmware, reboots, power-off/power-on different computers, nothing works.

  Curiously, I could add the printer very well on Ubuntu Linux computers and print immediately, although the scanner still doesn't work here. So my problem is on the Mac.

  OK, I have now works. The HP installation program provided on the CD-ROM supplied with the printer does not work. After you download the new version of support.hp.com, I could successfully add the printer by IP address.

  Also, just a quick note to all the world using Linux (although it is not officially supported by HP):

  The printer works fine, using HPLIP, but requires at least version 3.11.1 to work. I had to add an additional to my linux installations software source to make it work.

  Under Ubuntu 10.04/10.10, add:

  PPA:hplip - isv/ppa

  Other Linux distributions will be different, if you are having problems check to see how to install the latest version of HPLIP software.

• Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

  I am weather evauating to buy Dreamweaver CS6...

  Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

  On the connection between States Dreamweaver: "server certificate expired or contains invalid data."

  I tried:

  -ALL Dreamweaver Server configuration options

  -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

  -Make sure the certificate "issued to the"domain name is my domain name. "

  I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

  This has been discussed previously. I recommend reading my old thread for details:

  http://forums.Adobe.com/thread/889530

  But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.

• You can not connect to your account because your father has blocked.

  Seems that your account has been banned
  You can not connect to your account because your father has blocked.

  
  
  E-mail address is removed from the privacy *.
  
  
  I can't account to enter the Inbox due to the closure and I do not have the father
  and please help as soon not to open mail and I can access works me it and
  I can access account to it, but the Inbox

  Hello

  I converted this thread in a guarantee of 1:1 for confidentiality purposes, please check the area of private message on this topic regarding the where you can meet with private aid. To check the private message, make sure that you are connected to Microsoft Community using the account that you have published this survey. After signing in, under your first post there are 2 tabs "answers all and Messages private.

  For users who have exactly the same problem, please post your concern in the link below, including the address affected so that we can help you. I will now be locking this thread.

  "Your account has been blocked. You cannot access your account because your parent has blocked it. »

  Kind regards
  Gerard G.

• "Preparation set up Windows. Do not turn off your computer"can't NOT GET PAST!

  I have windows 7, and once everything was loaded, she wanted to make a few updates
  I stopped him so he can make and it's updated 33/42 for 2 hours before I gave up and restarted

  now it is stuck on "preparing to set up Windows. Do not turn off your computer.

  Help!

  Hi Gronfors,

  Try to start the computer in safe mode do a system restore and check if it works very well.

  To start in safe mode follow the link given below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to boot to the desktop in mode safe mode try Method 1 if one does not work follow method 2.

  Method 1:

  Navigate to the specified location and delete the files, and then try to boot into normal mode

  c:\windows\winsxs\reboot. XML

  c:\windows\winsxs\pending. XML

  Once you boot to normal mode try to install the updates one by one and check if Windows update terminates the process.

  Method 2:

  If the above given step does not work try it to perform a restore of the system in safe mode and check if that helps. Follow the steps below.

  You can perform a restore of the system on the computer to restore the previous settings again.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Once the system restore try to boot to the desktop in normal mode and check if updates work fine. Try to install the updates one at a time.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.

  Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.     I have a small Toshiba laptop which has installed Windows 7.  I uninstalled my Norton (that I was instructed to do so by a friend); tried to reinstall Windows 8; and got the same message.  Any suggestions?

  Hi Dreah117,

  Thanks for choosing Windows 8!

  I understand that you get this error trying to upgrade to Windows 8. Its good that
  you have removed your anti-virus software are there is a possiblity of it
  causing problems with installation

  I have a few questions about your system

  1. what operating system (OS) you upgrade?
  2 what is a 32 or 64 bit OS?
  3. you try to install a 32-bit or 64-bit of Windows 8?

  You can try these methods to see if it solves the problem

  Method 1:
  Run the upgrade wizard and check to see if your system is compliant with the minimum requuirements.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Method 2:
  Disable or uninstall a software such as CD/DVD burning utility or third-party disk utility to defragment programs such as perfect disk / Daemon Tools

  (a) in the notification area, next to the time looking for icons of software disk utility

  (b) pass the mouse over it to check the name

  (c) right-click on the icon and select "Exit/Disable" or a similar option.

  Method 3:
  Make sure your computer is updated through Windows Update.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Update

  Method 4:

  Disconnect all unnecessary external devices such as printers / joysticks etc.

  Method 5:
  Put the computer to boot is a way to solve problems

  http://support.Microsoft.com/kb/929135

  Note: Please follow step 3 on the link if upgradation fails to return your system to a normal startup.

  We know what's going on and if we can be of any other assistance.

• I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

  I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

  Thank you

  You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB

• I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.

• Ivory Coast not in the list of the iTunes Store in the country? Countries on iTunes Store cannot be changed to Ivory Coast (Côte d'Ivoire)

  I have my store open in Thailand but now I move to my country for 1 year and I want to change my country store. I can't because the Côte d'Ivoire (Ivory Coast) not in the list.  Please I need help from apple

  FYI, you talk about other users on these forums, not support nor Apple iTunes.

  There is no currently in the iTunes Store in Côte d'Ivoire and until the month if - when Apple opens an it (we won't know where it's maybe) unfortunantely then you will not be able to download any iTunes store content - you cannot continue to use the Bank of Thailand, you can only use the store of the country then in the country.

• IBM ThinkPad T42 would not connect to my home network secure wireless

  Configuration IP of Windows __An internal error has occurred: a device attached to the system is not functioning. __Please contact support services technical microsoft for more help.

  Others have had a similar problem, but I tried the solutions that have worked for them, without success.

  All of a sudden, my IBM ThinkPad T42 wouldn't connect to my home network (WPA2-PSK) secure wireless.  It would be either (1) stay in a constant state of "acquiring network address" or (2) do not recognize networks wireless in the range.  Sometimes, it would connect to a nearby unsecured network, but the network would still not appear in the list of available wireless networks.  So I tried to connect directly to the ethernet, which also did not work.  I then ran the ipconfig/all command at the command prompt and got the message:

  Windows IP configuration
  An internal error has occurred: a device attached to the system is not functioning.
  Contact support services technical microsoft for more help.
  Additional information: unknown media status code.

  So, I went to Microsoft Product Support Services, which does not seem to offer all the solutions.  I searched this error online and found several similar problems - some users had problems with viruses.  Some users had winsock2 corruption, and some recommended to reinstall the drivers for my network cards.  I'm computer literate, but not a computer Wizard, so I was able to follow their instructions for checking the winsock2 corruption (I think), and I think it's very good.  I did a complete scan of symantec, but who came with nothing.  I downloaded the drivers for my network cards which are: Wireless - 11 a/b/g Wireless LAN Mini PCI Adapter, ethernet - connection of a Mobile Intel (r) PRO/1000 MT and was able to update my wireless driver, but not the driver ethernet.  The latter Assistant said we "could not find a better match for your hardware than the software currently installed".  I had wireless internet to work for a few hours last night, even if I still have the same error message when I run ipconfig/all.  I started my computer this morning, and the same problem again - constantly says "address of network acquisition" even if no wireless networks are appearing on the list.  Also, I tried the system restore to see if I could go back before the problem started, but after that I tried several dates, System Restore has still not successful - it wouldn't work again.

  So now, I have my computer in safe mode, and it is connected to the wireless internet, even if the ipconfig/all command still gives the same message, and I am running symantec again to see if I can find something!

  Please help me!  If you think that I may have missed something with the winsock2 or installing drivers, or if there is something I could not find on the internet, please let me know!  I'll try anything.

  Note: I have Windows XP Professional Service Pack 3.
  Network card drivers, I'm running are:
  Wireless: Date - 02/05/2007, Version 4.1.2.156, provider - Atheros
  Ethernet: Date - 24/10/2006, Version 8.7.9.0, provider - Intel

  Thank you!

  Update: when I disable the Intel PRO/1000 MT driver, I can run ipconfig/all with success.  Then imagine it's something to do with this adapter or the driver.  Any ideas?

  OK, so here is what I did to solve this problem.

  I've updated to the latest version of the IBM BIOS

  Then get the WLAN driver from the manufacturer, NOT IBM, NOT Windows Update. Depending on your card, it will be Cisco or Intel.

  I can not stress enough that updates to IBM and Windows update does not work and I lost a lot of time. However, once downloaded directly from the manufacturer (new version) worked flawlessly!

• My laptop with Windows Xp does not connect to the internet, please help me!

  Then my laptop, as indicates it works on Windows Xp, but even if I'm supposed to be connected to my home network, when I run Internet Explorer, it can not connect to internet. Any help and insight will help. Please help me!

  I'm sorry that had to retype all of this, but in essence, that everything indicates that things work correctly with your Internet connection.

  To translate, the first bit tells us that your router assigned your computer 192.168.0.12 IP address.  The own IP address of the router is 192.168.0.1

  The result of ping 127.0.0.1 indicates that your computer can communicate with itself (the adapter is OK)

  The 192.168.0.12 ping result indicates that your computer can communicate with your router (that we already knew because otherwise your computer don't would not have been assigned an IP address).  It also means that you are connected to your local network.

  The result of the ping 192.168.0.1 is similar to the 127.0.0.1 test.

  And finally, the ping Google result shows that you are able to access the Internet.

  Knowing all this, you probably need to reset TCP/IP or Winsock, or both.

  Manually:

  Open a command prompt window and type

  netsh winsock reset {enter}
  netsh int ip reset c:\resetlog.txt

  Or see these two articles from Microsoft, include the two "FixIt" links
  How to reset Internet Protocol KB99357 How to determine and recover from Winsock corruption 811259 KB 2

• Windows 7 does not connect to the new wifi networks

  I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.

  Can someone help me?

  Hello James,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur for the following reasons:

  -WEP, WPA or WPA2 key or password security issues.
  -Incorrect network connection settings.
  -Corrupt or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you