Windows 8.1 / Bootcamp: no driver

Similar Questions

• How to convert the MBR to GPT to work around Windows Installer error bootcamp

  Hello

  I have a problem as a previous post (8.1 to Windows Installer on iMac with drive fusion, GPT partition error):

  "Hello,

  I have tried to install windows via bootcamp on my iMac and can't seem to fix the "Windows cannot be installed to this disk. The selected disk is the GPT partition style' error.

  I successfully completed all the steps until I'm in Windows Setup and select the partition on which Windows should be installed. I get the error "Windows cannot be installed to this disk. The selected disk is the GPT partition style. "I formatted the partition, but I still get the same error. »

  Trying to get this resolved as soon as POSSIBLE. I have a MacBook Pro 8.2 (early 2011). El Capitan installed. I already disabled SIP. Try to install Windows 10, if possible, or 8.1 if and then to 10. The target volume is disk0s4. I was able to successfully create a Setup disk Windows 10 USB (even on my MBP 2011), thanks -windows-to-create-the-usb-flash-drive-for-mountain-lion-with-updated-boot-camp/ https://mihail.stoynov.com/2013/04/22/force-boot-camp-into-using-an-iso-image-of

  I tried to look around in this forum and elsewhere to solve my problem. I have met help desk 'Loner' of T and hope he can ring for my case. Here is the result of the following commands in a Terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  In addition, I downloaded gDisk but I can't seem to be able to select all the options. Be waiting for instructions.

  Thanks in advance.

  Best,

  Gabriel

  Last login: my Apr 25 14:24:12 on ttys000

  dGabriels-MBP: ~ the gabrielaxel list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Axel HD 937,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 61.7 GB disk0s4 data base

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 15.6 disk1

  1: DOS_FAT_32 WININSTALL 15.6 GB disk1s1

  Gabriels-MBP: ~ list of cs gabrielaxel$ diskutil

  No logical volume group CoreStorage found

  Gabriels-MBP: ~ gabrielaxel$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1831009760 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1831419400 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1832688936 120574048 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Gabriels-MBP: ~ gabrielaxel$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1831009760] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1831419400-1269536]

  04:07 1023 254 63-1023 254 63 [1832688936-120574048] HPFS/QNX / TO THE

  Gabriels-MBP: ~ gabrielaxel$

  Hello again,

  Due to the time constraint, I went ahead and had a run of luck the orders gdisk on mine. My Bootcamp partition is disk0s4. I get the following error:

  Complete control of the final. About to write data of TPG. THIS WILL OVERWRITE EXISTING

  PARTITIONS!

  Do you want? (Y/N): Y

  OK; new partition table (GPT) GUID written/dev/disk0.

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Abandonment of writing!

  Is it just b/c that I can't make these changes on the disk I am running off?

• No sound in Windows 10 in BootCamp.

  I did a clean install of Windows 10 in training camp with the ISO (International English) I downloaded from Microsoft. There is no sound on the Windows side, but it seems to work fine otherwise. In the Windows Device Manager shows no driver problem. Apple support stated that they could not help and it was a problem with Windows. Microsoft wouldn't help me and said it was a problem with the machine Apple and BootCamp. Microsoft says that Windows 8 is compatible but not Windows 10. How to make the noise at work?

  Sound will not present via the pilot of its correct training camp. Have you tried to go into the Manager of devices and say things to get the latest audio driver for your system? Check that Bootcamp using the sound driver appropriate for your system.

• install windows on mac bootcamp AND like a machine... single virtual license?

  I have a mac and I want to install windows 7 on my second drive to load via bootcamp for when I want to use all the power of my computer for windows based tasks. I also want to be able to install it on the same mac once again, but as a virtual machine in Parallels for when I don't have the time to restart or for the less memory/CPU intensive tasks.

  I would be able to do it on a single license key /? See these 2 separate machines and it lock me up?

  You cannot use the same key even if it is a VM because it is considered as a separate computer. You will need to use a second key for the virtual machine, or choose an option.

  You can buy another copy here (Full Version) for the virtual machine:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Windows 7 EULA:

  3D. use with Virtualization Technologies. Rather than use the software directly on the licensed computer, you can install and use the software within the single virtual (or emulated) system on the licensed computer. When used in a virtualized environment, content protected by digital rights management technology, BitLocker or any hard drive full-volume encryption technology is perhaps not as secure as protected content not in a virtualized environment. You must comply with all national and international laws that apply to such protected content.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Can I install Windows 10 of Bootcamp Asst USB created by car?

  I received the message at the opening of Boot Camp-

  "The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Asst Boot Camp to install Windows. »

  My boot drive in the form of a Mac OS extended (journaled) volume, so I clicked on OK, but then the 3rd box on the screen select tasks has been grayed out, so I couldn't check "install or remove Windows 7 or later version, so I let the 1st two boxes checked and ran BCA to"create a Windows 7 or later version install disk"and"download the latest software of Apple's Windows support. After I had option to stop smoking, not install a partition or any other thing.

  Now, when I boot with the Boot Manager, it shows my OSX HD, the EFI boot drive and a Windows disc.

  When I select it, message says «start on Boot Camp Asst USB» created by car... »

  What happens when I leave the reader to perform the installation of Windows 10?

  It will create a Windows partition?
  If this is not the case, where it will install Windows? on my OS x 10.11 startup disk? or what?

  Note: The USB key created by car was created iso Windows 10 that I downloaded as a developer of Windows which can be used without a license key.

  I've used it with Parallels Desktop without any problem.

  Rerun the BCA and check if you can click on only the Option install. If it is greyed out, OS X Terminal, please after the release of

  diskutil list

  Cs diskutil list

• I am running windows 10 and need a driver for my superdrive drive

  I have a Surface tablet running Windows 10 and use my drive superdrive apple on this topic.  He needs a driver, but I don't know that one when I go to apple downloads to employment support - is there?

  Apple does not have a driver for use on a Windows System. You need a Windows driver that works with the drive in the drive mechanism - usually a mechanism Matsusita or Panasonic.

• Installation of windows 7 with bootcamp

  In discussions with Apple Support technicians, I was led to believe that the MacBook Pro machines supported Windows 7 and above. However, when trying to install Windows 7 with Bootcamp Assistant, I learned that Windows 7 is not supported and I must have Windows 8 or higher.

  Is there a work around? Or do I have to get a license of Windows 8?

  For BootCamp, there is no work-around: Win8 or Win10 are your choices. However, such as Parallels Desktop virtualization solutions can run any version of Windows and can be a viable solution for you.

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• Windows Update includes the Toshiba driver updates?

  Hello

  Windows Update includes the Toshiba driver updates?

  And if yes, do you know what drivers are included in Windows Update and that would be excluded?

  Thank you...

  Hello

  Microsoft and Toshiba updates are two different things.
  Toshiba drivers are offered by Toshiba, and these drivers are tested by Toshiba. Toshiba has developed a small tool called TEMPRO. This tool runs in the background and look for information on available updates.
  All updates of drivers, tools and utilities does not update automatically. It can be done by the owner of the laptop. TEMPRO just pick up info on the net and to inform the owner of the laptop.

  Microsoft updates are probably known to you. These updates are Microsoft and Toshiba has no influence on this.
  When you check the list of available updates may have included updates to the WLAN/LAN card, driver of the touchpad and device ACPI Toshiba x 64. This is defined as optional updates and cannot be updated.

  To be honest you should not update at all. For hardware use drivers provided by Toshiba only.

• Windows 8 recovery Usb Flash Drive can do factory setting?

  Hello world

  I created a windows usb 8 recovery flash drive using HP Recovery Manager software, so my question is that, not USB can do by default from my laptop.

  Thank you

  MUHAMMAD Asif Qadri Qasim

  Yes, fine, if you select all start again without saving anything, it will be...

• What is a Windows 8 certified USB flash drive?

  I just bought my 3rd USB flash drive in the hope of being able to copy my recovery image. My computer would not use the first two I tried all ports USB 4 - port 2.0 and 3.0. This time, I bought a HP flash drive who said that she supports Windows 8. I understand that I should not use a Windows 8 certified USB flash drive. Before I open this disc, I want to know if it's a. If so, I will return it not open - unlike the first two I tried.

  The States of package under requirements that Windows 8 is one of the necessary systems. For me, this does not mean that it is certified for Windows 8. Am I wrong?
  
  Computer: HP 500 - a60. 8.1 Windows (x 64)

  Hello

  Your question has not been answered by Erico on one of your other posts?

  If a piece of equipment is certified MS then it should be presented to MS for certification.  Some USB flash drives are marked on the package compatible with Windows 8, but this does not mean that the particular flash drive is "certified."

  There is to many, many USB flash drives that work with Windows 8. Some have argued that, if the USB flash drive as a 'removable' device, so it should work with the HP Recovery Media Creator.  However, I recently discovered that one of flash USB 2 (team F108 64 G) drives that I is not set up as a 'removable device' when you open my ThisPc (myPC) and it works perfectly for me.

• CD Rom drive - DVD Ram - windows cannot load the device driver

  Model: HP Pavilion Touchsmart Notebook PC 15 n209TU 15

  Operating system: Windows 8

  The CD drive does not show

  Error code 39

  Hello

  Please use the following meethods to fix:

  http://support.Microsoft.com/kb/314060/en-us

  Kind regards.

• cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  Watch 746,39 instead of 3000 GB GB SATA drive, I used Assistant seagate drive but you get an error when you try to use the 'extended capacity manager' - version not supported for nVidia disk controller driver

  where can I get a supported nVidia disk controller driver version if they are available for my system, or windows 7 home 64 bit should recognize the drive anyway?

  thanx

  I just installed a pcie sata II raid startech.com controller, after a slight problem installing the driver, on the third attempt, windows saw the full disk disk management

• HP Pavilion g7-2043sf: Windows could not find a driver for your network card

  Model: HP Pavilion g7-2043sf

  Product number: B1P51EA #ABF

  Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

  Windows could not find a driver for your network card
  Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
  Install a driver for your network card
   
  Collection information
  Windows Version: 6.1
  Architecture: amd64
  Time: Thursday, December 24, 2015 12:34:16

  In Control Panel, I found this information:

  Ethernet controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

  I need all drivers of network?

  Thank you.

  Hello:

  You need these drivers...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55979.exe

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp58586.exe

• HP ENVY 17-j013cl... passed to Windows 7 64-bit, HDMI driver needed

  I switched to Windows 7 64 bit, because I just couldn't take Windows 8 more!  Unfortunately, I had some problems, which have fortunately been resolved through this forum.  I'm new here need a HDMI driver so that I can plug this thing to my TV again.

  Your help would be greatly appreciated.

  HP ENVY 17-j013cl Windows 7 64 - bit HDMI driver...

  Thank you.

  Dan

  Please use the provided HP driver Intel graphics high definition (HD), that supports HDMI.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation