Windows 8.1 No HDMI Audio output
I connect the HDMI from my laptop to the TV and before the 8.1 update, it worked fine. Now I have video but no sound.
Device Manager shows two things under "Sound, video and game controllers".
1. high definition Audio Devide (with yellow triangle)
2 IDT High Definition Audio CODEC
When I see the properties of first it is said
"This device cannot start. (Code 10)
STATUS_DEVICE_POWER_FAILURE ".
My computer product number: C8P48AV
Kindly help me.
Thank you
Anand.
Hi Anan_B.
You can download the graphics drivers from the Intel Web site. Here's the link, click here. Also, you should be able to update the drivers from Device Manager. Here is a link to a document from Microsoft to do. click here. The document is for Windows 7, but the process is the same. "I'll also send a Microsoft document ' updating a hardware driver that is not working properly"click here.
Tags: Notebooks
Similar Questions
-
Why my windows media player stops the audio output from my headset in the middle of a song?
I listen to music through a Bluetooth wireless headset. However, in the middle of songs the audio stops. Windows media player is still playing and audio output continues for 10 to 30 seconds later.
also, it stops at the end of the songs and takes a few seconds with the new song to restart again.
Hello
Method 1.
Try using a different bluetooth or use bluetooth even on another computer and check.Method 2.
Play the sog directly on your computer and check the output.Method 3.
If the same bluetooth works fine on another computer try to update the drivers bluetooth on your computer and check.I hope this helps.
-
No the D3100 HDMI audio output
I'm trying to connect my TV to JMB in my Dell Inspiron 7559 via the D3100 docking station. I have a picture but no sound. There is no HDMI option in the audio device Manager Windows 10. When I connect the TV directly into the laptop I have no problem with the audio.
Hi Robert,.
For your info, I had the problem solved on the DisplayLink Forum: -.
"The D3100 Dell delivers the sound to multiple output at the same time, unlike the dedicated graphics card audio adapter, it will not take the name of your amplifier as it can not take several names." It would be a little overwhelming to get 5 new audio devices (2 HDMI, 1 DP, 2-shot) just to the dock in any case...
If you get no sound on Sony receiver, can you try to remove the plug to see if this helps it?
I don't know how to put Dell up audio on their dock.It worked for me. I removed the plug back and hey presto sound has been rerouted to HDMI!
See you soon.
-
I get no reports of error of these updates and the system has rebooted to complete. After the updates, when I choose my Linksys playback machine, there is no error and activity is illustrated by the device in the Audio window. However, no sound is produced by the music bridge. When I remove these updates, everything works fine. I hope that a fix for this. I wouldn't let my system without these updates.
Any suggestion would be appreciated.
Thank you
I'm sorry. Here it is:
http://community.LANDesk.com/support/docs/doc-29155
I'm just happy to have my bridge of music working with the update. After all, it can appear again to point 8.1 of Windows.
Thank you
-
Change the audio output to hdmi
I have an hdmi cable connected between my HDTV and my dell xps m1330, I can get the video to transfer very well but can't do the sound of the game through television. I looked on the internet for how do to it and theres a lot of instructions for vista / w7, but I can not understand how to change the HDMI audio output in windows xp.
Hi ccmcmill12,
Follow the below mentioned steps and check the results:
a. click on the button 'start '.
b. click on 'control panel '.
c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
e. This will bring up a window titled "Sound".
f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
g. There should now be a checkmark on this option.
h. the sound should play through your HDMI connections to the TV.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
No HDMI Audio after the resumption of sleep\standby
Windows recognizes not the HDMI audio after recovering from sleep mode.
The Audio is back, via HDMI, after restarting.
I found a solution if your PC has an optical output and HDMI. Connect an optical cable to PC and then to sound system. HDMI PC to TV. Work of the mine. I don't have to reboot, I check my computer Realtek speakers as default.
-
I have a dv6000 HP Pavilion Entertainment PC. For the past 4 months, I tried to find out how to take care of my audio problem. My toolbar on the speaker icon, there is a X. "No. Audio Output Device", it says that I have mouse over this icon.
I tried to use Recovery Manager and a few others suggestions appropriate for Windows Vista.Unfortunately, it works but only a few hours. Nothing has been a consistent solution and permanent.Help, please.-Dr. PsychowittzHello
Follow the steps described in the links below:
-
Error "no audio output device installed" while trying to access the audio
Title: "no audio output device installed" on Satellite U305-S7448 with Windows 7
I have a 4.5 years old Satellite U305-S7448 with updates of Windows 7 has had "no audio output device is installed" and a red X over the icon. I uninstalled the Realtek driver and reinstalled. I still have the red X on the "speaker" icon and no sound. The problem happened after taking the laptop to a meeting. I got his back once, but he lost again after taking the laptop to another site again.
Hello
-Did you do changes on the computer before this problem?Method 1: Follow the steps mentioned below and check if that helps.(a) right click on the Volume in the Notification area icon.
(b) click the Read tab.
(c) right click on the box empty.
(d) select Show Disabled devices and disconnected devices
(e) click right speakers and select Enable.(f) click right speakers and go to properties, select the option use this device under use of the device.Tell him also to move the cursor up in the levels tab and the default value speaket.Method 2: I also suggest you to check whether the audio service is running or not.(a) click Start.(b) type services and search for Windows Audio and Windows Audio Endpoint Builder services.(c) ensure that both services are Automatic and started.Method 3: Restore the systemPerform a restore of the system to a point prior to the show and check if this solves the problem.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
For reference:Tips for solving common audio problemsHope this information helps. -
Windows 7 64-bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010
There is no realtek hdmi output in his choice.
In its Panel:
Speakers
Headset
Realtek Digital Output
Pls help
Hello detroithp, you could try going to this link and see if the information is what you need.
This seems to be a common problem. The link shows the solution to this problem is for Vista,
but it should be the same for Windows 7.
-
HDMI - no audio output, windows 8
Hello
I have a laptop HP 2000 with Windows 8.1. At some point, the hdmi output to monitor stopped to send an audio signal. The video signal is very good.
It is marked in the Device Manager: 1 - STD HDMI TV (AMD High Definition Audio)
The monitor and hdmi cable work well with other computers.
I have disabled/enabled the HDMI device and also updated drivers (Windows says that my drivers are up to date).
Any help appreciated. Thank you.
Scott
Hi, Scott:
See to install the latest audio driver for AMD HDMI works for you...
Accept the agreement. Download and install the ATI HDMI Audio Device driver.
-
Add TV LCD LG as an audio output device when connected with HDMI
When I connected my laptop to my TV via HDMI, the sound came through the television. But I went to the audio output of the laptop by accidentally turning off the TV as a device on the selection screen of the "playback devices". Now I want to spend my audio back to my TV, but the device is no longer an option. How it add or repair?
HelloMethod 1.Please update the video card drivers, but also the audio drivers and then check if you have the ability to change the audio device by default.Update your sound driver in Device Manager:
a. Click Start and then click Control Panel
b. click on system and Maintenance
c. under Device Manager, click on devices and equipment display
If you are prompted for an administrator password or a confirmation, type your password or click on continue
d. expand sound, video and game controllers
e. right click on your Audio Controller, and then click Properties
f. Select the driver tab
g. click the Update Driver button.
h. Select the option automatically search for an updated driver
Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.For more information see the links below:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyAutomatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardwareMethod 2.For more information see the articles below:Connect your computer to a TV
http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TVNo sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
P7-1430: p7-1430 windows desktop 8 is installed no audio output device
I have no audio beats; IDT; or even audio outputs detected when I try to open the volume control.
Hello:
See if this windows 8.1 driver installation works for you...
This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported.
File name: sp67043.exe
-
HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?
HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?
Hello
The DVI does not support audio. You must use a separate with the DVI cable audio cable. There are DVI cables that do not have an extra audio cable in the same sheath, but they are usually not sold in most retail stores.
There are rumors on the net that ATI could have a special cable where some unused DVI pins were used to route the audio but that could also mean using an ATI video card. It would be a very strange configuration and not one I would recommend.
-
No Audio output device is installed (Windows 10 64 bit, HP Pavilion 500 series)
Model number: 500-007 a
Operating system: 10 64-bit Windows
Description of the problem: no sound.
Hello
I came from TenForums forum, hoping to find a solution to the problem of noise from my office.
Status of the solution of the problem is at: http://www.tenforums.com/drivers-hardware/45369-no-audio-output-device-installed.html
When I move my cursor on the audio icon on the corner at the bottom right of the screen, the message of the index says "no Audio output device is installed". By clicking on the audio icon so that windows are trying to solve the problem will not solve the problem.
In Device Manager, I have 2 "High definition audio controller" that display a yellow "!" mark on them. Both controllers are on the devices tab of system.
As you can see in the picture above, there is no tab "audio, video controller and game."
How can I get my sound back?
Thank you.
You are the very welcome.
What worries me is that your device manager does not have the IDT HD audio listed under sound video and game controllers Device Manager.
Normally, when you install W10, the IDT HD audio device is in the list, and it just doesn't work.
You can try reinstalling W10 and see what happens.
-
I'm trying to connect my Pavilion dv6 on my HDTV with a HDMI cable. I make the video, but no audio on the TV speakers. The problem started after I upgraded from Vista to Windows 7. I had no problem with HDMI with windows Vista.
I tried to date/reinstall the audio drivers from the HP website, but it does not work. I also tried to go into the control panel and change the playback device, but the HDMI audio device icon no longer appears in the playback devices dialog box. Read-only devices are speakers and headphones double independent double headphones and SPDIF (Digital Out Via HP dock.)
How can I solve this problem? Why the HDMI device is not displayed in the reading dialog box?
Hi all HDMI his problem solved after I installed the new windows 7, icon hdmi on the menu of display devices have disappeared. Here's what I did and the icon go back and redo the sound work of hdmi. Graphics cards intel must be updated. The link below will take you to the site intel and it detects the updates required for your system. http://www.Intel.com/support/detect.htm run the program and install the required updates and then restart windows. HDMI icon will be back and the sound will work normal as before. I hope it will solve the problem of everyone with the hdmi sound problem. I have hp Pavilion dv6, I'm happy to hear the clear sound crisp again of my bar of his Philips HTS 8100. Kevin www.canvasdelight.com
Maybe you are looking for
-
Satellite P100 - reduced Audio level Possible
I have a TOSHIBA Satellite P100 PSPAAE-01D00UENSystem serial number: 17172416W, and until recently had no problem with my sound levels. About a week ago, without known alterations to my system, no new facilities application and any updated drivers, I
-
Cannot find drivers for my C50T-A382 Satellite
Hello. I have laptop Satellite C50T-A382 *.Part No. PSCFNV-003002AR *.OPERATING SYSTEM. Windows 8.1 My problem I tried to reset to factory settings laptop hard drive recovery systemBut after 7% it freezes and crush and showing the blue screen saying,
-
where do I put update to directx, what file?
I am a complete novice when it comes to computers. Where do I put update to directx, what file?
-
How to uninstall the killer App?
I hear to stop using the app killer. So, how to consider my phone is off?
-
Layer of extra customization in 11.1.1.8 Portal
I'm working on seeded customizations MDS for some of the out-of-the-box taskflows for our WebCenter portal.It is a 11.1.1.8 (with BP 4) Portal (formerly spaces).Now I have some customizations I want to target a group of users, not for all users. But