Windows 8.1 update not listed is not in the store
Hello
Try to uninstall KB 2871389 , and reinstall the try again.
Press Windows key + R
Type: appwiz.cpl
Press enter
Click View installed updates
Look for the number of this update
Select it, right click and click on uninstall
Tags: Windows
Similar Questions
-
Windows some updates not installed the 646 error code
Windows some updates not installed the 646 error code
See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem
my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem
Hi Glennisidore,
Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.
-
Windows Photo Gallery will not save the edited images
Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot
Message says photo library was beset with problems and the modified file cannot be saved
Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot
Message says photo library was beset with problems and the modified file cannot be saved
================================================
Windows Photo Gallery... Cannot save modified photos...No guarantees and proceed at your own risk!
Good luck...
--
(1) try to do a system restore to an hour before
the problem started.With the help of the Windows Vista system restore
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/--
(2) I've seen reports that this problem may be related
Kodak Easy Share software. Installation "Kodak
Single-action Version 8 for Windows from the
the following link may be the solution.Kodak Easy Share 8 software version
http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
(FWIW, it's a good idea to create a system)
restore point before installing software or updates)--
(3) I saw reports that could clarify the next steps
until the question...Right click the library icon and choose
"Run as Administrator"--
(4) I copied the info from a tech forum on
the net... I don't know if it works, but maybe it's
worth a try:A. right click on Task Manager open the
taskbar on the bottom of your screen and choosing
The task in the menu Manager.B. click the tab process, along the upper part of the
The Task Manager screen.C. in the process tab, select the corresponding button at the bottom
left of the screen that says "show processes of.
all users"and click on it. Click 'Continue' to the UAC
the prompt that appears.D. the screen should turns off a moment, then
back with much more than process listed. Click
the "Command line" column to sort the list and
Search:"C:\Program Files\Windows Media Player\wmpnetwk.exe"
Read the description in the next section on:
Windows Media Sharing Service reader network
F. click on this process. Click the end «»
Treat button"at the bottom right of the screen.
Confirm 'End process' if necessary.You should now be able to save your changes to
your photos normally. The bad news is that this
should be performed whenever you start or restart Vista.
And I don't know how to prevent the situation from
in the first place of loading.--
5) posted by: artologik
The solution came to me when I could not recreate
the problem on a laptop with Vista Home.
Everything I could compare, I noticed that the
%Path% environment variable was not between different
the 2 machines.I guess that WLPG relies on the dll must be found
on the way to the system; When not found, it must return
Back to ' base or incomplete "library finds it
the default specific paths or the user. The solution for
me has been to ensure the entire path system
to the folders in the order appropriate.To fix, follow these steps:
A. right click on the COMPUTER icon on the
desktop and choose PROPERTIESB. choose ADVANCED SYSTEM SETTINGS
C. Si you are prompted by UAC to allow, go ahead.
and ALLOWD. click on ENVIRONMENT VARIABLES...
E. in the bottom half, under SYSTEM VARIABLES,.
Find the PATH variable and highlight theF. click the button CHANGE
G. ensure that what starts with
% SystemRoot%\system32;%SystemRoot%;H. ensure you that a semicolon separates each entry.
I. click OK three times
J. restart the computer
Good luck...
John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Parse error SFC "Windows Resource Protection could not perform the requested operation".
Original title: my computer is messed up, and I'm unable to fix(1) double click on files will open in a new window(2) not possible to delete several recordsI tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"I tried to create new administrator user accounts and the problem persists.I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)Is there something I can do?You could make a backup of the image to a DVD or disk.
Renee
-
Windows Media Player does not recognize the new downloaded songs
I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.
I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site. The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked. The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).
Any help/suggestions would be greatly appreciated.
MitchProblem solved!
Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.
Convenience store detected library corrupt and "in media files appear in the WMP library. Then ran convenience store on WMP settings which reset OMP to default settings. After that, everything worked as announced.
Thanks to Big_Dave for putting me on the right track.
-
Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?
Please answer with repair options and details on where to go to get there.
If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.
Please download the free version of Malwarebytes.
Update immediately.
Do a full scan of the system
Let us know the results at the end.http://www.Malwarebytes.org/products
-
Windows Media Player is not in the multimedia functions to scroll to the bottom of the pop-up window
Hi WilliamHendry,
1. did you of recent changes on the computer?
2. you receive an error message during playback of WMV files?
3. are you able to play other file format music files using Windows media player?
In Windows vista, you will not find Windows media player available in the list of Windows features.
Check and make sure that your computer has all the necessary codecs installed.
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
Play an audio or video file: frequently asked questions
-
Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11, version 12 is sucks.
Hello, Simone
I'll assume you're on Windows 7. Windows Media Player 12 is not supported on Windows Vista or XP and as such, you will need to go back to Windows Media Player 11.
You can check the permissions in the registry to ensure that it is able to record information.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
Open the registry editor by clicking on start, type regedit.exe in the search box and press on enter, you may be prompted to continue.
In the registry editor, navigate to HKEY_CURRENT_USER, Software, Microsoft, MediaPlayer, then Preferences.
It should be an element named LastLocation_26, right-click on it and select Rename, and rename it to old LastLocation_26.
Leave the open registry editor and open Media Player, then move it to your favorite place and close Media Player.
In the registry editor, press F5 on your keyboard and check if LastLocation_26 has been recreated.
If this is not the case, there is probably a permissions problem.
If so, the location must be registered.
Let us know.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Media Player does not open the .tgz files
Original title: codec .tgz files
My Windows Media Player does not open the .tgz files
Hello
1. what happens when you try to open the .tgz files?
2. what version of Windows Media Player do you use?
.tgz file is not supported by Windows Media Player.
You can use your favorite search engine to download and install the latest codec for Windows Media Player. Subsequently, check if you are able to read .tgz files.
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Reference: information about the types of media files that supports Windows Media PlayerPackage of Installation of codec
Hope the helps of information.
-
Windows xp monitor does not display the background image
My windows xp screen does not show the background image. Started when I changed the photos there twice. Now, the background image is only 1/4 of the image on the left 1/4 of the screen. The rest is white for 3/4 on the right side.
Other images, all jpg files, are the same.
Hi edwardo418,
Check that your post office is set to stretch. Perform the following steps.
- Right-click on an empty space on the desktop.
- Select Properties.
- Select the Desktop tab
- Change the setting to Stretch under Position
- Click on apply
- Click OK
Let us know if that helps.
-
Manually reinstall Windows XP and can not find the product key.
Manually reinstall Windows XPManually reinstall Windows XP and can not find the product key.
What to do to replace the product key.Where to find your product keyYou can find your Windows product key on the label supplied with the package provided with your copy of Windows. The label can also be on your computer case. Activation of the pairs with your computer, your product key.Lost or misplaced product key (certificate of authenticity)http://support.Microsoft.com/kb/824433How to get a replacement product key?To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMSFor more information on this topic, visit http://support.microsoft.com/kb/811224 -
Window Live Mail does not open the wmv files.
Window Live Mail does not open the wmv files. It comes up with an error that says: (wrong parameters). Also gives the path that looks all wrong. How can I change these settings?
If I save the wmv on my desktop it will open, so I think that the file association is OK.
1. download and save the attachment to the office.
2. right click on the saved file.
3. Select: Open with on the shortcut menu.
4. click on: choose [default] program.
5. Select: Windows Media Player.
6. check: always use the selected program to open this type of file.
7. click on OK. -
TRY TO UPGRADE TO WINDOWS 7 BUT C: DRIVE FULL DESPITE THE REMOVAL OF ALL UNNECESSARY PROGRAMS
I'm trying to upgrade to windows 7 Vista but not like the 40 GB c: partition has only 3 GB free. Removed all unnecessary programs, etc. If you only really have Vista on C: drive but still showing 37GB used. Any ideas how I can release another 6 GB of free space.
Tahnks a lotI hate to say it, but it would be a great time for a bigger hard drive. While 40 GB meets at least for installation you really need more for in-place-upgrading a system using 37 GB. Setup needs space for temporary files, its own temporary relocation, etc.
-
Windows Media Player does not support the codec used to compress the file.
I can't do some of my videos to play it goes on to say that Windows media player does not support the codec used to compress the file. How can I fix?
Hello
What is the file format of the video files you are trying to play in Windows Media Player?
Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.
You may encounter this error message for the following reasons:
(a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.
(b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.
Windows media player will play only the files and videos only if it supports this type of file.
Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.
http://support.Microsoft.com/kb/316992
If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.
WARNING OF THIRD PARTY SOFTWARE
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
See the link below for more information on the codec.
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.] -
As suggested, I tried to run scannow to repair Windows Vista. I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer
Hi rdoran,You perform the steps from the administrator account?
To determine which files can be repaired by the System File Checker tool, follow these steps:Step 1:NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
For how, see the SFC analysis details in the CBS. JOURNAL:* Open an elevated command prompt.
* In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.* Close the elevated command prompt.
* Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.* You can safely delete the sfcdetails.txt file later if you wish.Reply back with the details in the log file.
If it does not help to complete the scan, you can complete the steps below and check out them.
You're able to boot in safe mode ?Step 2:For more information on how to log in to safe mode, see the following Microsoft article:If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Step 3:
In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.At the command prompt, type the following command and press ENTER:Chkdsk /rNote: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Maybe you are looking for
-
The symbol for ´´yen´´ is no longer in the 10.0.2 IOS and it is part of my code to open my ipad air 2. Instead, Apple made some changes in the keyboard and included our symbol of the currency of Costa Rica. How can I get?
-
I can't install add-ons. When I click on 'Install now' I get a message that reads "Stumbleupon could not be installed because Firefox is unable to modify the file necessary.". I can not install additional modules.
-
I can't buy a recently added British TV show
I had all four versions of the Apple TV and consider myself to be an experienced user. I am currently enjoying my 4 ATV, and it seems to work fine in all respects. I regularly rent or buy movies and TV shows you like. However, I go back on a problem
-
NW9440: Quadro FX1500M Windows 10 x 64 NW9440
OK, I know this laptop (NW9440) is the best part of ten years now, and I may be on a hiding to nothing. But HP did release the drivers for the Quadro FX1500M for both Windows 7 and drivers at the level (AFAIK) 8 and 8.1 in the form of the 259.47 whic
-
I have an iMac 5 k (with 1 year warranty expires soon) which works perfectly until recently. It seems to out of himself. The screen goes suddenly completely dark and keyboard led light would come on and then off. It happened three times and all three