Windows 8 blue screen system service exception
There is now an update of firmware for Windows 8 computers that use AMD processors:
http://support.Microsoft.com/kb/2818604
So make sure that this update, as appropriate to your system, is installed.
This update can allow KB2778344 be installed without problem.
Tags: Windows
Similar Questions
-
Error of the screen - 3 b (mini dump downloaded) Blue system service exception
Hello
I got errors permanent blue screen from windows last updated (20 August)
I finally make me updated manually, it was OK, since new errors appeared (9 September)I now get an exception blue screen system service / per day
it restarts and then it's ok (for a day)BTW, I checked memory with windos tools: seems OK
My minidump file: https://skydrive.live.com/redir?resid=A8AD6CD1267B7D57! 180
I need your help!
Thanks in advance!Most recent minidump files showed similar mistakes as before and more indicate a hardware problem.
Past errors, such as BAD_POOL_HEADER (19) and (4th) PFN_LIST_CORRUPT tend to point to the RAM.
What I would say is to delete everything except a 1 GB RAM module and see if improves stability.
Later, you could reinstall the RAM, a module in time, see if stability is maintained after each module.
-
I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it. I can't use my computer without losing all the data every few minutes. It is brand new. Fix? It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.
For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:
http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx
According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.
Many users report the same error recently and so far have all AMD/ATI graphics cards.
If all goes well the graphic driver update will help.
If the problem persists, consider uninstalling 2778344.
Then, at the moment, 'hide' 2778344.
-
system service exception blue screen
With the help of a connected USB GPIB adapter 2015 LabView, NI Max worm. 15 and the NI 2 488. Replace the old system. New system with the same versions of software installed causes a BSOD when run us our program or "scan" for devices the BSOD looks as follows.
System Service exception
ni488k.sys
0 x 00000033 (0x00000000C0000005) FFFFF8800A44702E
any ideas?
Tried several different things but ultimatlely I think I have all the updates from Windows update has solved the problem.
-
Error System Service Exception blue screen BCCode: 3B
For about 3 weeks, my Vista 64-bit machine has started meeting with a BSOD. I met four accidents in 3 weeks. However, this does not happen very often as a point, I went a week and a half without crashing. I ran MemTest86 + for 12 hours, with 10 passes completed without error reported.
The accident occurs generally when I have several programs open, which includes a game like DOTA 2, Spotify, Skype and Google Chrome.I've updated my network driver and I just updated my video card driver, but it remains to be seen if this will help. Looking for a simple list of things that I can start going through, starting with the most common causes of this type of system Service Exception BSOD. You will find additional information below:Signature of the problemProblem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Additional information about the problemBCCode: 3BBCP1: 00000000C 0000005BCP2: 0000000000000000BCP3: FFFFFA600C5BFF10BCP4: 0000000000000000OS version: 6_0_6002Service Pack: 2_0Product: 768_1Information about the server: 448e9b3d-41d5-40c5-bd68-1a4f420dafe8I also have a dump file mini that I could provide if necessary.Associated with the Solo - 1 Sunbelt Personal Firewall SbFw.sys driver. I would remove at least to test.
Please remove the viewing programs of CD such as Daemon Tools and Alcohol 120%.
They use a driver, are in your dmp, called c:\windows\system32\drivers\sptd.sys, which is known to cause a BSOD.
Use this program to uninstall SPTD DuplexSecure
-Http://www.duplexsecure.com downloadsWhen you are finished, you can use this Freeware:
MagicISO Virtual CD/DVD-ROM (MagicDisc) instead
http://www.MagicISO.com/download.htm
-
Windows BSOD 8: System Service Exception - tcpip.sys
Hello
I got a new laptop for Christmas and updated to Windows 8. There has already been some hissing adjustments with me. A few days ago I tried to update the OS (continued to come with the update failed) unsuccessfully until today where I got it working after leaving it while I was at school. This has been the most recent installation, I know, and it has been fine for the last time to date. He can't go 3 minutes without a BSOD.The error message I get is: System Service Exception - tcpip.sys.Any contributions to this issue would be appreciatedThank youOwenOwen
This single DMP has been altered, so I can't give you definitive information yet. Often when crashing in tcpip.sys, it's due to malware, or real malware application installed. I would like to delete bitdefender and replace it with MSE (at least for testing). It's a PNP (plug and Play) device just not sure what atm.
You have also some old drivers that need updating. If you continue to plant please download each of them.
Update of these (if available)
mwlPSDVDisk.sys Fri Mar 25 03:12:23 2011 (4D8C4057)
EgisTec Inc. digital fingerprint biometrics.
http://www.carrona.org/drivers/driver.php?id=mwlPSDVDisk.sys
irstrtdv.sys Wednesday, June 15 at 14:52:49 2011 (4DF8FF81)
QuickStart storage technology driver Intel®
http://www.carrona.org/drivers/driver.php?id=irstrtdv.sys
k57nd60a.sys Wed Oct 19 16:17:36 2011 (4E9F3060)
Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver
http://www.carrona.org/drivers/driver.php?id=k57nd60a.sys
NSNetmon.sys Thu Nov 8 16:29:32 2011 (4EB99F3C)
Pilot NovaShield Kernel network Module that is believed to be a part of BullGuard Internet Security
http://www.carrona.org/drivers/driver.php?id=NSNetmon.sys
NSKernel.sys Thu Nov 8 16:29:41 2011 (4EB99F45)
Pilot of the kernel Module of NovaShield is believed to be a part of BullGuard Internet Security
http://www.carrona.org/drivers/driver.php?id=NSKernel.sys
HECIx64.sys Wednesday Nov 9, 19:52:25 2011 (4EBB2049)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
iaStor.sys kills Nov 29 22:39:19 2011 (4ED5A567)
Intel storage drivers
http://www.carrona.org/drivers/driver.php?id=iastor.sys
IntcDAud.sys Tue Dec 6 06:23:07 2011 (4EDDFB1B)
Intel Graphics Media Accelerator HD driver
http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys -
Where to start System Service exception?
I read all the information in the messages. It seems that every opportunity of Service Exception system is caused by something different, according to publicised codes. I must admit that I am quite a novice I don't understand all of the solutions posted on this forum. Can someone go through me a checklist of where to begin to fix this problem? The posts I've read assume that you know how to do things that are listed. I don't! Another problem is that the error screen disappears so fast that you cannot start reading.
New HP Pavillion, Windows Vista 64
So far, it's the only time wherever I get this error when I close the lid of my computer without turning it off. The system hangs 'Sleep' mode or another mode it is in.
Here are the codes:Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: 3b
BCP1: 00000000C 0000005
BCP2: FFFFF800024E0272
BCP3: FFFFFA60163AEC50
BCP4: 0000000000000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini092109-01.dmp
C:\Users\Elaine\AppData\Local\Temp\WER-133084-0.SysData.XML
C:\Users\Elaine\AppData\Local\Temp\WERAB4B.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
Hello
It is usually a video driver problem even if it could be also bad memory or same antivirus/antispyware/security
programs. Have you updated your video driver or another determining factor on when it began. Do not forget to
Look in the Windows updates to see if all drivers have been updated it. Have you installed, changed or uninstalled
all antivirus/antispyware/security programs?-------------------------------
It comes to my convenience store generic blue screen. You gave the codes for the 1st part is just in case those changes
that you are troubleshooting. More on drivers in the next message to use when you get to this part.Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-----------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Hey there I had windows 8.1, everytime I try to shut down my computer I had blue error with a system error screen name service exception
Hi @Amrdd
I understand that you get a blue screen or a blue screen of death (BSOD) on your laptop. I'll be happy to help you, but I will need some additional information. What is the product number of your laptop? Are there more BSOD error message? More information the better.
-
Windows 7 blue screen... BCCode: a
I was recently watching a movie on my laptop when suddenly "blue-screen" appeared with error codes. My laptop then restarted and it happened again. I then waited so he can restart once again, however, I started windows in safe mode and then rebooted the system, and it came perfectly. After you find the error Although the center of the action, I found this information.
Signature of the problem
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 2057Additional information about the problem
BCCode: a
BCP1: FFFFFA8015CAF010
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80002B8BA57
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Bucket ID: X64_0xA_nt! MiReleaseConfirmedPageFileSpace + 87
Information about the server: 1d3b1813-1d92-44ea-8f24-3e4ca7b3dac8I would really appreciate any information on this subject and how to work around this problem in the future. Thank you for any feedback.
Hello
References to Vista also apply to Windows 7.
Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates -
updates to the pilot), or add key software lately? Drivers and antivirus/antispyware/security
the products are also suspect likely. Next message is my generic driver updated methods to use when
you get to this part of the resolution of the problems.BCCode: a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after installing a faulty device driver,
BIOS or system service.If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be
caused by a device driver, system service, a virus scanner, or backup tool which is not compatible
with the new version.Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the Windows Advanced Options menu, select last known good Configuration .
- This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus
Scanner, or backup tool- Check the system log in Event Viewer for error messages that may identify the device or
- the driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of material provided by the manufacturer of the system, in particular the memory
- scanner. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has interface cards (SCSI) small computer system, contact the adapter
- manufacturer for updates of Windows drivers. Try to disable sync negotiation in the SCSI
- BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port.
- Also, check each IDE device to the right setting master/slave/stand alone. Try
- remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and all the
devices are listed in the list of the products tested Microsoft Windows market.BCCode: a 0x0000000A<-- read="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that causes
It crashing.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
This is my generic troubleshooting tool and can probably give a bit more specific when help
you give the ICC codes.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen
of death "crashes and displays the information about all crashes in one
Table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista (also Windows 7) Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
C850-119 - Win 8 accidents - satellite system service exception
Can someone help me - I have a new laptop Satellite C850-119 with Windows 8 and suddenly, after a month my PC crashes and I get a note - your met Pc problem and this problem due to your PC restart.
He also says: System service exception,.What's wrong?
Any help would be much appreciated!
Hello
Not quite sure if it s just a problem of software, so as a first step, you should check if its software related problem
Please see this FAQ from Toshiba:
+ Windows 8 recovery & Repair +.
http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htmYou can try to repair the system and if that doesn't do it, get it back to factory settings.
-
Last night, my laptop that runs windows xp blue screened and says something about the queue
original title: help solve a mistake, please on windows xp
Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:
SC stop cisvc
SC start cisvc
Can someone tell me please how to do this? I think I know, but I'm really not sure so please help... Thank you
It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.
However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.
If you don't see an icon for the printer that you think should be there, you need to fix this. On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.
If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post. However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.
Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless. If you want to change your encryption, you would start by changing the configuration of your router from Verizon. You should be able to find detailed instructions on the Verizon support site. I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm
-
Windows xp blue screen stop: 00000024
Title: original windows xp blue screen
had a blue screen with stop:
Hi steveshepherd,
(1) since when are you facing this problem?
(2) remember to make changes?
(3) what happens when you insert the Windows XP CD?
You can follow the steps provided by Karena R in the link below, which relate to this issue
Kind regards
Ajay K
-
Windows 7 blue screen problems
Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Get windows error blue screen after installation Service
I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.
I tried to install GO twice and got the same error.
Awating for your valuable review
Hi piZviZ,
Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:
(1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.
(2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1
(3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails
I recommend just update to the latest going TO if possible.
Kind regards
Joseph
-
64 - bit Windows 8 (BSOD) system service exception error
I couldn't connect on my laptop, after loading Windows, and then on the blue screen (BSOD).
Please help me. Here are the files that you may need to help me.
the Minidump files: https://onedrive.live.com/redir?resid=34DB0826A5470047%21107
information system: https://onedrive.live.com/redir?resid=34DB0826A5470047%21108Thank you Microsoft... :)
The same bug, check cause. Uninstall AMD/ATI drivers, restart. Later, do not install the version you keep installing and either try a beta version or the version until you have the problem before the update.
Kind regards
Patrick
Maybe you are looking for
-
I would like to ask how to disable voice command in iOS 10
I have a speech impediment, so I do not use SIRI control or voice. Ios9 voice control screen appears rarely, but I updated to ios10 in my 6s, that voice control screen appears desperately all the time that the home button has a greater sensitivity. I
-
Satellite 2800-600 - how to upgrade the Bios/Firmware?
How can I upgrade the Bios and firmware on my 2800-600? I want to install a new Combodrive. Which drives are supported? Where can I find the drivers and firmware etc... Please let me know. Thank you. Another point of view - I bought MS Windows XP Pro
-
HP Envy x 360: is there a Possible way to do it!
Is there a way I can change the GPu in this laptop? I really want to play and it's too late to go back (I got it since December).
-
If I update my motherboard I need to do a fresh install of windows
I do not remember what was told, but I want to update my motherboard. I think I remember from somewhere because if you upgrade or change your motherboard, you'll have to do a fresh install of your operating system. In my case, it's Windows Vista Ulti
-
Extra space after the quotation mark open
I write fiction. I need to be able to put the dialogue in quotation marks. My problem is that when I ask speech recognition for 'Open-quote' and then start the dialogue, I get an extra space. Like this: "come with me, Jim. Does anyone have a solution