Windows 8 - device Base system under other devices

Similar Questions

• 4050 proBook s: 10 4540 windows upgrade s base system device

  I did an upgrade of windows 10 and got two bangs of pilot.

  base system device

  SD/mmc host controller

  MS host controller

  help please

  Hello:

  You need this driver...

  FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HDX 16 t 1200: upgrade Windows 10: Base system device

  Hello

  First of all, let me say that the upgrade of Windows 10 (I did a clean install) seems to work fine on my HDX 16.

  I have a few device drivers, I and Microsoft cannot understand. When I make upward device under other devices Manager, I have:

  >? Another device

  - ?! System device base (calling it a 1)

  - ?! (2) base system device

  - ?! Device base system (3)

  - ?! Unknown device (4)

  Properties:

  1 device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 1. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2382 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 01E4 requires installation.

  2. Device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 4. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2384 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 04E4 requires installation. (the only difference is location and event-Info)

  3 bus PCI 6, device 0, function 3

  Events-info: device PCI\VEN_197B & DEV_2383 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 03E4 requires installation.

  4 device Type: other devices; Manufacturer: Unknown; Location: On system compatible ACPI Microsoft; Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Details-value: ACPI\HPQ0004\2 & DABA3FF & 1

  Events-info: device ACPI\HPQ0004\2 & daba3ff & 1 requires installation.

  I found similar problems of pilot in the forum on other HP laptops, but nothing on my HDX 16 t 1200.

  Thanks in advance for any help.

  Hello:

  You need these drivers...

  Base system devices:

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp42446.exe

  Unknown device:

  This package provides the HP 3D DriveGuard for laptops software
  models that run an operating system supported. HP 3D DriveGuard protects the hard drive of "parking the heads ' if the cell phone is accidentally deleted or is suddenly hit by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• Pavilion DV5-1110em: Base System Devices on Pavilion DV5-1110em Windows 8.1

  I just upgraded laptop to my Windows 8.1 father he had bought after finally abandoning with Vista. While I realize that it is not an option for support on the HP site, it installs and runs almost perfectly. However, in the Device Manager there are three entries 'Base system device' and an 'unknown device' under 'other devices '. The credential of material for the latter are:

  PCI\VEN_197B & DEV_2384 & SUBSYS_3600103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3600103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  PCI\VEN_197B & DEV_2383 & SUBSYS_3600103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3600103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  PCI\VEN_197B & DEV_2382 & SUBSYS_3600103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3600103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  ACPI\VEN_ENE & DEV_0100
  ACPI\ENE0100
  * ENE0100

  Someone is able to help me find the right drivers for these devices, or at least help me identify them so that I can then try to track down the drivers?

  Sincerely, Neil

  Hello:

  You need these drivers...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-68911-2&cc=us&DLC=en&LC=en&OS=4063&productOid=3812282&sw_lang=&product=3812283

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66806-1&cc=us&DLC=en&LC=en&OS=4063&productOid=3812282&sw_lang=&product=3812283

• Windows 7 RC - Portege M200 - Base system device

  Windows 7 RC works well on my M200, but Device Manager is showing a "other device" without driver loaded. He is described as "Base system device" and properties indicates its location as "PCI Bus 2, device 13, function 0'.

  I tried online searches and navigation within my M200 for a driver without success. I read elsewhere in these forums that the 'Base system device' could be tied up with the SD utilities. I downloaded a new copy of the SD utilities and installed them, but still no luck. Certainly, the SD format utility does not work - it recognizes not only an SD card in inserted - so maybe the necessary revision of SD utilities for Windows 7.

  Not a major problem as I can format SD cards elsewhere, but it would be nice to receive a certificate of good health from Device Manager.

  Has anyone another execution in this problem and even better, found a solution?

  Keith Woolf

  You are right about revision. All the drivers, tools and utilities for Windows 7 must be designed and tested before they are offered for download. As you know Windows 7 is not yet on the market and the public support can not be started. With first notebook comes with Windows 7 Toshiba Toshiba will be support for the new site and some old models of laptops.

  Sorry but there is nothing you can do about it.

• HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack

  Hello

  Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?

  1. base system device

  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  2 - system base unit

  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3. base system device

  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  4 - unknown Device

  ACPI\ENE0100
  * ENE0100

  Thank you

  Michael

  1, 2 & 3 is listed under "Driver-storage" JMicron card reader  ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.

  On your page of Support here:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV8-1000-entertainment-notebook-PC-series/4011373/model/4040272#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Device base system & coprocessor problem with driver Windows 7 - Pavilion dv9720us

  I have a HP Pavilion dv9720us which was very glitch with Vista 32 bit.  After saving all on an external hard drive from Seagate Replica, I did a clean install of Windows 7 64-bit.  Everything seems to work, but I get error messages stating that the x 2 Base system device is not working because it doesn't have the correct driver, the coprocessor is also mentioned as not having not the correct driver.  All 3 of these devices are listed in the other devices category in Device Manager.   In addition, my laptop has 4 GB of RAM and still Windows 7 recognizes only 2 GB.  Help!  I deliberately enhanced to reduce the glitchy Vista answers. I could go on Windows 7 32 bit, but I don't know who's going to solve all my problems.

  Thank you very much!

  Kathy

  Remove your Ram and install it again.

  Notes:

  1. ensure that, then you have no battery or ac adapter connected to your laptop.

  2 Manufacter installed in this model 2048 MB of Ram (2 GB), so if you have not added 2 GB on your own all is ok.

  There will always be problems and your really have 4 GB:

  You check Ram with Memtest86 + or GoldMemory. Just burn it on CD *.iso file and run the test. You may need to change the boot sequence in the Bios (to get the BIOS press F10 boot).

  Message edited by Daniel_Potyrala on 10/30/2009 12:57

• ProBook 6550 b: driver missing for 'Base system device' x 2 after Windows 7 install on laptop

  Upgrade to SSD drive and a fresh install of Windows Professional 64 bit, I've got two conflicts in referring to the 'base system device' Device Manager Both devices are PCI Slot 2 (PCI bus 67 0 device function 1)

  Both devices enter the following code in the information system:

  PCI/VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01/4 & 7ECE869 & 0 & 02E2

  I read through the 16 pages of other people having similar problems, but not the same code. I installed the Ricoh 5-in-1 reader for software 64-bit without success.  Any help will be greatly appreciated

  Here is the link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

• Pavilion dv6645us after you have installed Windows 7 ultimate x 64 no drivers for base system device

  After you have installed windows 7 ultimate on my pavilion dv6645us laptop, I can't find drivers for base system device, location: 2 PCI Bus, device 5, function 2. Also for another device of the Base system, location: 2 PCI Bus, device 5, function 3, I can't find the drivers. And I have a unknown device, location: on the system as 'good' to ACPI Microsoft. (I don't know the English translation).

  The only thing that does not work on my laptop, I noticed is that I can't write data to my external hard drive (WD essential 1 TB NTFS), I can access the drive and get the data off of it, but when I try to put my computer on the outside driving my laptop goes down (it reacts with difficulty (, all usb devices are disconnected and I have to manually restart the computer by holding down the button for 5 seconds).

  Is this a known problem and the most important is there a solution for this?

  Thanks in advance.

  Hello

  Base system device is for sure your player card.

  Use your Vista drivers for this problem:

  Ricoh 5-in-1 card reader here

  If there are problems with the excavation using compability mode. How al information here.

  How to solve other problems as unknown device?

  Go to control panel-> Device Manager control

  Click with the right button of your mouse on each yellow Panel and choose Properties. Then click on background details and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it:

  

  

  

• I just installed Windows 7 on a part of the Dell Vostro 1500, l features notebook.__In control, I have two mistakes "Device Base system has not a driver" __There is no driver installed for the Base system device. _ No fixed

  I just installed Windows 7 on a Dell Vostro 1500 laptop.
  In the pane control, devices of l, I have two errors "device Base system has not a pilot.
  There is no driver installed for the Base system device. Not fixed
  Apply the solution to the complete driver problem
  Install a driver for this device does not work

  Troubleshooting gives me two messages:
  The first is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0592 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0BF0
  Error code: 28
  The second is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0843 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0AF0
  Error code: 28
  I cannot locate a driver through web search - how do I know what are the devices? and where can I find a driver?

  Try to update the drivers using Windows Update.  If this does not work, try the versions of Vista of Intel and Ricoh under Chipset drivers on the website of downloads & drivers for Vostro Notebook 1500 . Make a restore point first.

• How to make base system device for windows 7__ drivers

  I need drivers for the device basic system for window 7

  Hi Charles Cleaver,.

  1.

  Please write what you need this driver. Computer laptop, desktop or perhaps motherboard. Give us information about the manufacturer and the model.

  2.

  To resolve the problem with the Base system device , you need to install dirver chipset or card reader .

  3.

  Go to: Control Panel-> Device Manager

  Click with the right button of your mouse on each yellow sign with exclamation point ( ), and then choose Properties. Then click on background details and paste hardware id here. This way we will know what it is.

  Below, an example of how you do it:

  

  

  

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• HP 6930p running Windows 7 Ultimate 64-bit: lack of Base system device driver

  I have a HP 6930p laptop running Windows 7 Ultimate RTM 64 bit version. I have a "Base system device (unknown devices)" in the device with a yellow exclamation point Manager. What is this device and is there a driver for it?

  The details of the device are:

  HW ID: PCI VEN_1180 & DEV_0843 & SUBSYS_30DC103C & REV_14

  Thank you.

  This is the map Reader_try Ricoh your driver for Vista 64 bit HERE

• Driver missing for "Base system device" after installing Windows 7 on laptop dv6-2170ee

  Hello

  IV ' e got 3 device drivers missing in my laptop Pavilion dv6-2170ee base system.

  Here are the details of the missing drivers

  1 PCI bus 4, device 0, function 1

  2 PCI bus 4, device 0, function 3

  3 PCI bus 4, device 0, function 4

  Any help on the function or where I can find these drivers would be appreciated muchly.

  See you soon.

  Please download and install the JMicron card reader driver for the page of Entertainment Notebook PC drivers HP Pavilion dv6-2170ee.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation