Windows 8 iso oem after upgrade ssd.

Similar Questions

• Reference Dell 7720 Intel rapid start after upgrade ssd

  Hey guys, I had already changed my Sata options in the Bios to AHCI if I I could install windows on my 32 GB Msata drive. I used this setup for a good year or so, but now I just bought and installed an SSD for my system. I reinstalled windows and upgraded to windows 10, but after the installation of the Intel Rapid Start desktop application, I noticed that it doesn't give me any options for acceleration using my 32 GB mSata drive.

  When I return to my Bios to change my Sata options to Intel Smart Response Technology, I get the blue screen saying my pc restarts one basically I can't anywhere like that. I am only able to start windows with my Sata options set to AHCI, but I want to still use my 32 GB for cache purposes msata and speed up my telephony.

  Any help would be appreciated to help me to re - activate

  A native SSD does not need to cache - and in fact a development may lead to a slower system - not only more quickly if the cache drive is slower than the native ssd (which is almost certainly).

• File download window cannot be resized after upgrade to Firefox 7

  After the upgrade to Firefox 7.0.1 the upload file window is small and cannot be resized.

  This looks like what is whether, as you initially specific to the site.

• Portege Z30-A-10w: Win 7 BSOD after upgrade SSD

  Hello

  I am wanting to upgrade a laptop Toshiba-Portege-z30-a-10w of company SSD 128 to 512 SSD
  However when loading windows 7, it crashes when connecting with a blue screen error 0x00000001

  The SSD 512 that I use is
  http://www.crucial.com/USA/en/storage-SSD-M550

  and according to the
  http://www.crucial.com/USA/en/compat...Tege-Z30-a-10W

  It is compatible with the Toshiba portege-z30-a-10w
  I've updated the BIOS of the laptop to V4 30/04/2015 (which to my knowledge is the most recent)
  http://www.Toshiba.co.UK/innovation/...jsp?service=UK
  Moreover I have updated the firmware on the SSD 512 to what, in my view, is the last
  MU02 version
  http://www.crucial.com/USA/en/support-SSD
  However I still get the same problem with Windows 7 to break with a blue screen just before the opening of the session.

  All ideas

  Thank you
  David

  I've never managed to install Windows 7... but I installed Windows 8 and goes on well...

  I have no why, but install Windows 8 seems to allow the 512 SSD to use

  Hope it will be useful.

  David

• Qosmio X 500-10T: what setting should I change after upgrade SSD?

  Hello community,

  I'll upgrade my Qosmio X 500-10T (currently with two 512 GB drive HARD, although only has data on it) with a Samsung 840 series 256 GB 2.5 in SATA SSD Pro and then perform a new installation of Windows 8.

  My question: what settings should I change once the switching plate?

  I think there may be some settings in the BIOS that may need to be changed.

  Also, it is recommended to remove the second HDD due to possible performance issues along the SSD?

  Are the drivers on the windows-compatible laptop computer support page 8?

  P.S. I read on UEFI, is there a way to update/upgrade existing in UEFI BIOS?

  I know it's a lot of questions, but any help is appreciated.

  Thank you

  Hello

  > My question: what settings should I change once the switching plate?
  > I think there may be some settings in the BIOS that may need to be changed.

  Usually, you do not need to change anything in the BIOS.

  > Also, it is recommended to remove the second HDD due to possible performance issues along the SSD?

  You may notice poor performance while moving or copying data from the SSD hard drive or SSD HARD drive.
  but to think that you can keep the HARD drive in the 2nd Bay for other files.

  > Are the drivers on the windows-compatible laptop computer support page 8?
  Do you think that some drivers Win 8 there?
  If so, they are...
  otherwise, you can try some Win 7 drivers in the frame to win 8

  > . I read on UEFI, is there a way to update/upgrade existing in UEFI BIOS?
  If you're going to see an update of the BIOS for the Qosmio X 500 with a serial number 6. XX or later version, then it would be a version of BIOS released to win 8 too

• Cannot access Time Capsule and MacBook Pro on Windows task force immediately after upgrade to Vista professional professional 7

  I had a Windows workgroup for years, linking the PC and Mac, but also a Linkstation network through a Time Capsule router/Hard Drive Combo.  Immediately after the upgrade from professional Vista to 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but cannot access it.  I am able to access the Linkstation - system wonder a user name and password, and I have immediate access.  However, the system does not n = me a username and password when I try to access the two Apple products.

  Interestingly, I can access the Vaio MacBook, in providint the username and password for the Vaio.

  Please notify.  Thank you.

  IT FIXED!  Found the answer on the W7 Forum

  Access to Mac OS X Windows sharing Windows 7
  Windows 7 will not work with the Mac OS X Windows support for default share file. If you try to access a shared folder on Mac OS X, W7 will display a logon error repeatedly.
  The problem is that W7, by default, will only use NTLMv2 for authentication, which is not supported by the service of sharing of Windows of Mac OS x.
  The other problem is that safety minimum Session for NTVLM SSP based Clients.
  To work around this problem:
  1. in W7, open the control panel
  3. double-click on Administrative Tools
  4 double click on local security policy
  5 expand "Local policies" and select "Security Options".
  6. locate "network security: LAN Manager Authentication Level" in the list and double-click it.
  7. change the setting of "NTMLv2 only send responses" to"send LM and NTLM - use NTLMv2 session if negotiated"
  8. network Security: minimum session for the NTLM SSP (including secure RPC) Clients security
  9. change the setting of "128-bit" unchecked (No Minimum)
  10. click on OK

• Envy 15-c101dx: 8.1 Windows reset always available after upgrade to Windows 10 and refreshment?

  I tried to troubleshoot and fix a driver of hareware problem that was discovered after doing the upgrade of Windows 10 Windows 8.1. Before updating my system, I was warned by the software that I would not be able to return to Windows 8.1 if I did the update with the upgrade of Windows 10 still installed. My question is if Windows 10 also stop me from going back to Windows 8 if I did a reset of the system?

  I played it safe and restored back to 8.1 for Windows before you reset this time, but this will delay upgrading me to Windows 10 in confidence (1 month to try it is not a lot of time).

  Hi @hyjiad.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY x 2-computer laptop 15-c101dx and concerns with the Windows 10 upgrade. It shows me that your system is compatible with Windows 10 drivers. It tells you which driver he would have a problem with?

  The best I can offer at this point is to create your a HP recovery USB drive.

  Here is a link to Windows 10 FAQ. It gives you that Go Back is a feature that will restore your computer to the old operating system that was installed before you upgraded to Windows 10 for only 28 days. But with your recovery USB disk you can do at any point and time.

  I hope this helps you.

  Thank you.

• I need to recover my Windows 7 serial key after upgrade

  Hello. Well, a few years ago, I bought a PC with Windows 7. A update my operating system to Windows 8 Pro (original) last year. Two months ago I have upgraded to windows 8.1 Overview.
  My cons:
  -PC warranty expired three years ago. So I can't call the supplier for the series.
  -L' label with the serial number is the damage. I have only 4/5 of the key. I need the first five characters.
  My question is:
  -J' I retrieve my serial number of Windows 7, I'm having some trouble if I downgrade from Windows 8.1 Overview 7 8 and later?
  -Can I retrieve my serial number of my 4/5 of it?
  The reason is that I need to try a virtual Windows 7 machine in Virtual PC, but I need the series. My last question is: can I re-use my serial number on my VM?

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  You cannot use the license of Windows 7 on the COA sticker in a virtual machine if there is no host operating system or if the license is already in use.

• Portege R30 does not SSD start after upgrade SSD and HDD

  Hello

  I have improved my Portege R30 - A to add a second SSD (Crucial M550) replace the optical with the new SSD drive with caddy.

  But now the system does not start automatically from the original SSD.

  I could press F12 while turning on my laptop and make it appear the start guide. Here I can see my original SSD and I can boot from it properly.

  In order to boot in the BIOS, I see only the HDD/SSD, USB, ODD memory... It doesn't gives me the possibility to choose between SSDS.

  In any case when I boot in this way than getting blue screens after awhile in win7.

  I tried to install a HARD drive as the second drive instead os SSD and her resut is the same.

  Is that what I can do to solve this, now I have to use the second drive as an external USB drive.

  Thank you

  Hello

  This ODD of SSD/HDD replacement is not always possible and in many cases, the BIOS will not handle and will not recognize the new HARD disk correctly.

  That I can remember some old laptops Toshiba Tecra and Portege that supported the functionality of Slim Select Bay were able to manage the 2nd HARD drive instead of driving WEIRD, but this was not possible due to the available selection slim Bay.

  In your case it looks like the laptop so that the BIOS does not support this function and, therefore, the additional SSD/HDD isn't recognised correctly.

• Qosmio X 870-problems after upgrade SSD

  Hey guys,.

  I try to adapt an SSD at the moment and a bit of trouble. I used the software cloning provided to copy my data and OS anywhere on the SSD, which seems to have worked very well. I adjusted the boot sequence in the BIOS to get the SSD started first. However, I get a screen flickering and delay of loading, it is as if Windows does not work properly.

  I tried taking the HARD drive completely and simply using SSD - it takes Windows to the login screen, allows me to connect but then goes to a completely black screen and I see no office or anything. I can bring up the Task Manager, but that's all... I guess it's a problem with the process of cloning may be?

  The SSD is recognized by my laptop fine and is read/write correctly.

  Now, I want to try a completely new installation of windows on the SSD drive and format my HARD drive in the hope that this will solve the problems. My problem is that I have a preloaded 8 victory on my HARD drive and I have no idea how to do a clean install of it on the SSD - is it possible?

  Each google search on it seems to just suggest readers cloning - I'm confused!

  I use a Qosmio X 870 with Win 8.1

  > I guess it's a problem with the process of cloning, perhaps?
  On this virtual path, it is not easy to confirm.
  In my opinion, you should test the SSD feature in general. Install the original recovery image on SSD and check how it works.

  I improved my Satellite P500 with SSD and installed original recovery image. Everything works perfectly. I'm pretty sure that your Qosmio will be works well with the original version of the OS.

  Can you please test and post comments?

• Acer c740 constantly blocked after upgrade SSD

  Hi all

  I bought a ZTC NGFF m2 64 GB SSD for storage more in Ubuntu. After I installed the Chrome OS, the computer sees that I increased my storage very well, but I have a consistent crashes and slow download speed. Sometimes the screen freezes and responds more just, but most of the time, the screen goes all black (although blue stays on). From there on, I have to press the power button to reset the Chromebook.

  I returned the SSD for a new on Amazon, but the new SSD does exactly the same thing. If I go back to the stock SSD, all problems disappear. On Amazon, the SSD is very popular with the Chromebook Acer (version c720) and there were no complaints about it, as I had so the chances of getting the clothes back to back seems quite low.

  Any ideas?

  Thanks for the reply. I ended up buying a MyDigitalSSD instead of the ZTC and it seems to have done the trick. I used the application Chrome recovery on each attempt.

  For the last SSD, at the end of the installation of ChromeOS for the new SSD, there are two updates of firmware back to back that had to take place before things were fully functional. (ie: download update at a slow speed, restart your computer, download the second update at a slow speed, update the computer and then the internet speed was back to normal). I have a refurb Acer c740 so maybe it's a little more finnacky than regular models.

• Windows Explorer stops working after upgrade to sp2 for newly created folders

  Recently upgraded to Windows Vista SP2. Any new cause of file created Windows Explorer to display error message "Windows Explorer has stopped working" dialog when you try to look at the files in a directory listing.

  Here is an article on the limits that can help you to file naming: http://vlaurie.com/computers2/Articles/filenames.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 not genuine after upgrade

  Hello

  I have the laptop computer Samsung with pre-installed Windows 7 Home.

  Few days back, my wife made a sort of upgrade. To explain, I had no "Personalization" option in my right click menu on the desktop.

  Now I'll have this option in the right-click. Seems that something had set, which I'm not sure.

  These days, I get a popup that my widows is not geniune, please enable.

  I tried to enter the key located at the bottom of the laptop but it does not work.

  The question is, how would go back to the original copy of Windows 7. I don't want no extra - upgrade that cost me a new license.

  Thank you

  Buxant

  Unfortunately, no, only a clean installation will remove the installation of Windows 7 Professional. If you want to avoid the hassle of reinstall, then its probably best you just buy Windows 7 Professional license and update the product key.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key and click next to activate via the Internet.

• HP Mini 311-1037NR: Windows 7 ISO?

  Okay so here's the scoop. A time, that I decided to take one of my old phones and dual-boot Ubuntu on it. While his part Ubuntu worked after installation, the part Windows kept crashing. I tried to recover, but it fails every time. Frustrated, I decided to forget it and just wipe everything and reinstall Ubuntu. After doing this and messing around with other Linux distributions, I want to return that has my computer to its former and reinstall Windows 7 on it. How could do to get a version of a Windows 7 ISO OEM. I tried to install an ISO from Microsoft directly, but they said that the product key entered was for OEM and so I needed to contact you guys.

  @Tsredsfan

  There is always the possibility to buy a Kit of recovery here.

  http://support.HP.com/us-en/mediaorder/HP-mini-311-1000-PC-series/4011350/model/4051837/softwareitem/592116-002/STEP1

  REO

• Not able to view library in Photoshop after upgrade

  In my Photoshop suddenly disappeared asset Library (window / library - okno / knihovna) after upgrade. You advise me? Where?

  RB

  

  Hi RB,.

  Could you please uninstall and reinstall Photoshop Creative cloud once and then check.

  Kind regards

  Tanuj