Windows 8 Pro boots slow after windows updates

Similar Questions

• MS Windows XP Pro very slow after installing updates

  I have a computer that is running Windows XP pro. I put it to download updates but the choose me when to install updates. After installing some updates, the computer became so slow - especially during the same thaat start move the cursor of the mouse became a problem. Even the sound of windows when loging in is just sounds bad. This is the second time its happening. the first time that I had to format the hard drive and install windows again & evderything worked well until after the updates. I can't say what update is the cause of the problem, but am sure the problem is with some windows update. Any help will be greatly appreciated because I don't want to format the computer again, because later the question will come again unless I have disable windows update and live with the consequences.

  "Goodan" wrote in message News: fbfe2d05-1824-49da-a18a-0103bbc85001...

  I have a computer that is running Windows XP pro. I put it to download updates but the choose me when to install updates. After installing some updates, the computer became so slow - especially during the same thaat start move the cursor of the mouse became a problem. Even the sound of windows when loging in is just sounds bad. This is the second time its happening. the first time that I had to format the hard drive and install windows again & evderything worked well until after the updates. I can't say what update is the cause of the problem, but am sure the problem is with some windows update. Any help will be greatly appreciated because I don't want to format the computer again, because later the question will come again unless I have disable windows update and live with the consequences.

  Usually, I found that this happens when installing .NET updates - if you give the machine 20 or so minutes to regroup and then restart, the problem disappears usually.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Mid 2009 macbook pro running slow after update

  I had my computer since 2009, everything was quickly until I upgraded to Snow Leopard to El Capitan. After the update to El Capitan turn quite slowly. He was also heat very quickly. I ran first aid and running being check. I backed everything up to TimeMachine, removed several old files (movies, photos, etc.), but it is still slow. In addition, iPhoto no longer works, but I'm not not like many concerned that the problem of speed.

  EtreCheck version: 2.6.6 (226)

  Report generated on 23/12/15, 11:53

  Time 10:58

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (15-inch, 2.53 GHz, mid 2009)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro5, 4

  1 2.53 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 408 - SN = W03080KGNBWZA

  Video information: (Does that mean?)

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - since the start-up time: 13 hours

  Disc information: (Does that mean?)

  FUJITSU MJA2250BH FFS G1 disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: go-go 249,20 (82,19) free

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-868)

  USB information: (Does that mean?)

  Card reader Apple

  Built-in ISight from Apple Inc..

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Guardian: (Does that mean?)

  Any where

  Kernel extensions: (Does that mean?)

  / Library/Application Support/VirtualBox

  [loading] org.virtualbox.kext.VBoxDrv (4.3.26) [click for support]

  [loading] org.virtualbox.kext.VBoxNetAdp (4.3.26) [click for support]

  [loading] org.virtualbox.kext.VBoxNetFlt (4.3.26) [click for support]

  [loading] org.virtualbox.kext.VBoxUSB (4.3.26) [click for support]

  / Library/Extensions

  [loading] com.sophos.kext.sav (9.4.50 - 10.9 SDK) [click for support]

  [loading] com.sophos.nke.swi (9.4.50 - 10.9 SDK) [click for support]

  Launch officers: (Does that mean?)

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support]

  [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist [click to support]

  [loading] com.epson.esua.launcher.plist [click to support]

  [operation] com.epson.eventmanager.agent.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  [operation] com.sophos.uiserver.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.ARMDC.Communicator.plist [click to support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]

  [loading] com.adobe.SC.FPFeedbackService - 1.0.plist [click to support]

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.bombich.ccc.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [loading] com.oracle.JavaInstallHelper.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  [loading] com.oracle.java.JavaUpdateHelper.plist [click to support]

  [operation] com.sophos.common.servicemanager.plist [click to support]

  [loading] jp.co.canon.MasterInstaller.plist [click to support]

  [loading] org.virtualbox.startup.plist [click to support]

  User launch officers: (Does that mean?)

  [failure] com.adobe.ARM. [...]. plist [click for support]

  [loading] com.bittorrent.uTorrent.plist [click to support]

  [failure] com.citrixonline.GoToMeeting.G2MUpdate.plist [click for support] [click for more information]

  [operation] com.spotify.webhelper.plist [click to support]

  [loading] org.virtualbox.vboxwebsrv.plist [click to support]

  Items in user login: (Does that mean?)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Mac Fan Control UNKNOWN (missing value)

  Caffeine UNKNOWN (missing value)

  AdobeResourceSynchronizer hidden UNKNOWN (missing value)

  uTorrent UNKNOWN (missing value)

  Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  Other applications: (Does that mean?)

  [ongoing] com.etresoft.EtreCheck.90912

  [ongoing] com.google.Chrome.50592

  [ongoing] com.Sophos.AutoUpdate

  [ongoing] com.Sophos.Configuration

  [ongoing] com.Sophos.InterCheck

  [ongoing] com.Sophos.notification

  [ongoing] com.Sophos.scan

  [ongoing] com.Sophos.sxld

  [ongoing] com.Sophos.webd

  Plug-ins Internet: (Does that mean?)

  DirectorShockwave: Version: 12.1.3r153 - 10.6 SDK [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [click for support]

  net.juniper.DSSafariExtensions: Version: Unknown [click for support]

  AdobePDFViewerNPAPI: Version: 15.009.20077 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.235 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.30317.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.235 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0 - 10.8 SDK

  SharePointBrowserPlugin: Version: 14.3.6 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 15.009.20077 - SDK 10.8 [click for support]

  CouponPrinter-FireFox_v2: Version: 1.1.10 - 10.6 SDK [click for support]

  JavaAppletPlugin: Version: Java 8 update 60 build 27 check version

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  Picasa: Version: 1.0 - 10.6 SDK [click for support]

  RealPlayer Plugin: Version: Unknown [click for support]

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  Java [click for support]

  Time Machine: (Does that mean?)

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 249,20 GB disc used: GB 167,01

  Destinations:

  Time Machine [Local] backups

  Total size: 1.50 TB

  Total number of backups: 27

  An older backup: 11/05/12, 10:22

  Last backup: 15/11/15, 23:24

  Size of backup drive: Excellent

  Backup TB 1.50 size > (disk size 249,20 GB X 3)

  Top of page process CPU: (Does that mean?)

  MDS 47%

  13% mdworker (12)

  9% WindowServer

  8% Google Chrome

  4% Google Chrome Helper (11)

  Top of page process of memory: (Does that mean?)

  987 MB Google Chrome Helper (11)

  375 MB kernel_task

  270 MB mds_stores

  Mdworker (12) 184 MB

  143 MB Google Chrome

  Virtual memory information: (Does that mean?)

  51 MB free RAM

  4.20 GB used RAM (981 MB cache)

  23 MB used Swap

  Diagnostic information: (Does that mean?)

  December 22, 2015, 23:09:43 /Library/Logs/DiagnosticReports/EtreCheck_2015-12-22-230943_[redacted].hang

  22 December 2015, 21:55:42 self-test - spent

  20 December 2015, 02:12:24 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2015-12-20-141224_ [redact ed] .crash

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• boot problem after bios update

  I was recently asked to install a new update of the bios on my HP Envy 15.

  After that installing Windows 8.1 is turned on and the version of the bios detected is Insyde F.56

  However, before the update, I had a dual boot by Grub2 and now I am unable to run

  the versions of Linux installed in children partitions on the same drive.

  This version of the bios seems to me to prevent the loading of Grub2.

  Can you help me to solve it?

  That's exactly what I did before:

  (1) linking boot-repair a liveUSB / recommended repair.

  (2) press ESC during startup / press F9 / select Ubuntu in the boot menu / start Ubuntu / run Startup Repair / recommended repair.

  In the case that grub won't load and windows starts.

• Yoga 2 Pro Black Screen after Bios Update

  Only, I have formatted my yoga 2 pro, downloaded the drivers and ran the update of the Bios. I followed the instructions on playing ran me the .exe, one click on next/ok until you restart the laptop and if I'm not mistaken a menu red with a progress bar appeared. At this time, I left and when I came back a few minutes later, the laptop is on, the lighting of the screen was on but the screen was black, the backlight of the keyboard was also turned on and everything else was off. Lights on/near the switch indicating if there turned on and connected to the AC are off.

  It was like that for more than 30 minutes now, no sign of progress. This happened to someone else before? I'm not very keen on must turn off or unplug the laptop while flashing the BIOS, but at this point there is not much else I can do.

  I found the answer to my problem to

  http://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/yoga-2-BIOS-update-crash/m-p/1322487/high...

  Now that I found this post, I remember the instructions telling me to turn it off manually when I've updated the bios earlier this year. However, these instructions don't mention about it, maybe they should be updated?

• MacBook Pro keeps restarting after iPhone updated 9.3.5

  Given that I didn't have at least a 50% load, I connected my iPhone 6 s to my MacBook Pro (10.11.6) updated the phone to v. 9.3.5. The phone updated fine, but now my Mac keeps on rebooting over and over again. The display shows the Apple logo and progress bar, but there are thin horizontal red lines across the entire screen. When the progress bar is full, the gray screen runs for about 10 seconds and then restarts, and it does the same thing again. I have absolutely no idea what to do. Can anyone help?

  Hello robbob116,

  Thank you for using communities of Apple Support.

  If I understand your message that after upgrading your iPhone 6s to iOS 9.3.5 via iTunes on your MacBook Pro, your MacBook Pro now repeatedly restarts. I know how it is important for your MacBook Pro start correctly for you. The first step I would recommend would be to start up your Mac in Mode without failure. The following article explains the use of Safe Mode and the steps that you will need:

  Try safe mode if your Mac does not end commissioning

  Best regards

• MacBook pro 2012 slow after battery died

  I turn to the question real quick. I have tried every method including reset PRAM, MSC, turn off auto adjust the brightness (I've read here, some people feel the UI lag when it turns on), the value of the different resolutions, remove windowserver or never plist. But the problem is still there.

  I noticed that my MBP is lag when resizing especially web browser windows, type (it is as I already have lots of type of sentences, and it seems the sentences after being frozen) and scrolling.

  I know that it is good to replace the battery, now (as the State of the battery is replace now), but not any time soon because I really need my turn atm and I can't even for apple for a month just authorized service center replace the battery. So is it possible that I can do to fix this? I did research all around the Internet and found out that some guys have the same problem because of the Intel Speedstep but is only exist with the 2011 prior design with Maverick is on (I'm running El capitan on end of 2012 rMBP).

  Thanks in advance.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information

• PC became slower and slower after installing updates

  Original title: How can I uninstall all updates?

  Soon I updated my pc my pc become slower and slower every day n now when I want to uninstall all updates or want to keep wanted only updates there is no option to remove...

  PLEASE HELP ME.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  After posting the Defragmenter report try some maintenance spare.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before the error occurred initially do not use this option.

  If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments.

  cCleaner comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

  http://www.CCleaner.com/download

• Pavilion g6-2006ax: no boot device after bios update

  I flashed the latest bios for my model to win 8 64-bit, and then when it restarted, it says no boot device, the bios detects no hard drive can boot from USB but when I try to format or repair it is detected no drive to do. I took battery cmos out and get out again but nothing. I also tested the hold down windows but with the b button and the power up and let go of all keys but the remaining blank screen bios recovery does not pop up. How to return to old bios?

  the laptop booted from the external hard drive, then I flashed the bios back to the old and it worked!

• Premiere Pro launches more after the update, question mark on the icon appears

  I've just updated Premiere Pro, and now it launches more. Only a question mark on the icon appears. The same thing happens with Illustrator, After Effects, and Photoshop. Does anyone have an idea on how to fix this?

  

  I thought about it. I just reinstalled all my apps that wouldn't launch and it works fine now. You can simply uninstall the apps screen update CC and then install here once again.

• Lightroom CC running slow after recent update. [was: most of the time it's very slow]

  After that the 2015 update is very slow to 90% of the time

  Hi raleighg,

  Suggest you follow the steps below:

  1. go in the Lightroom preferences > General > uncheck "Show Add Photos Screen.

  2 preferences > Performance > uncheck "use the graphics processor.

  3 restart Lightroom, and check again.

• Precision T7500 boot problem after BIOS update

  Hi eveyone,

  I've recently updated the a15 BIOS on my Dell Precision T7500 machine and now when it starts, it tries to start for a few seconds, then stops. He did this 10 times and the number 3 and 4 are on the machine. Everyone recognizes this problem?

  Win 7 64 bit Service pack 1, 6 GB of RAM, recently updated the BIOS A09

  Thanks in advance

  KWA-1,

  3 + 4 = suspends to RAM Windows fallback status

  You can start in safe mode and disable all options sleep/hibernate?

• Satellite P100 - boot failure after BIOS update

  Hello

  I wanted to update BIOS on my Satellite P100 - (PSPADE) with the latest version, downloaded from the Toshiba site.
  Quit all applications.
  Run the zip file error file not found %path\phlahnt.sys.
  Keyboard not working unable to stop even by using the power button / stop.
  Laptop shutdown unplugged and battery removed.
  More boot Message No, no. Beep, nothing.

  I tried with the CD of restoration with power into the F12 key, but nothing.
  I also tried to power up with and without AC connected and with and without battery, but still nothing.
  Plug, battery, at the time led the power leds and speakers also on
  Any help? Any suggestion, any idea?

  Thank you very much
  Nour

  Hello

  Hmmm what to say. Sounds not good and in my opinion, looks like you have successfully updated the laptop computer with a bad BIOS or something went wrong during the BIOS update process
  Are you sure you used the right BIOS of 110%?

  It seems that you will not be able to fix this problem yourself, without any additional help from the laptop technician.
  In most cases, the BIOS has to be flashed again on the particular way

  For me it s clear, you will need to contact the ASP to get rid of this problem

  Best regards and good luck