DNS server error

Similar Questions

• DNS server error that always brings back us to windows update erros trying to get on the internet

  Vista - hate him. I spent hours on the phone with a brand new computer that Toshiba with Vista 64-bit Edition Internet will stop working with the DNS server unknownerror. Sometimes reboot help but with all Windows update he internet is a luxury. Internet connection is perfect, perfect bc other laptops in the House with no problem, router, no viruses etc., computer - fine tooth - comb nothing.

  Take each OFF download windows update and work until updates again and then started barking at me, something is missing like its updates! Can't very well what update is screwing the connection or networking or a framework-Silverlight is always suspcious to me also.

  My icon for internet splits in two and shows as a #2 without asking confirmation except for a mysterious update. Access: Local and Internet. Symbol of the Internet will be turned off and will not ever look like disconnected until you try to connect.

  That's why people are going to Apple. Windows will not help or is somewhere secret and accept just your visa and mastercard and so what still you? Vista I can't update and no security.

  Toshiba is not very user-friendly, that is toward the back, they discovered Windows was the question. Isn't our problem, said - even if we're stuck with Vista with their product!

  I'd love to hear if someone has SIMILAR problems or if anything that I did not have tried! Thank you very much.

  Signed. Never buy new windows - toshiba on my list too.

  Hi begodsbutterfly,

  Welcome to the forum of answers windows vista.

  We are sorry for the inconvenience that you had to go through. I have some steps you can try to solve this problem.

  Try to check in SafeMode with Networking if the same problem occurs. To start in safe mode with network, restart your computer and press the F8 key for about four to five times. You will see the window options of safe mode with network in rated advanced. Use the arrows on your keyboard to select Safe mode, and then press ENTER.

  Please check if you get the error in safe mode with network.

  You can also try a system restore to the date when the computer was working fine.

  To do a system restore, please follow the steps below:

  1. click on start to reduce this includes this image, type systempropertiesprotection in the Search box and press ENTER.

  Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  2. in the System Properties dialog box, on the System Protection tab, click System Restore.

  3. in the System Restore dialog box, select choose a different restore point, and then click Next

  4. Select the restore point that you want to use, and then click Next.

  5 confirm your restore point and then click Finish System Restore restores the selected Windows Vista configuration and then restarts the computer.

  6 log in the computer. When the restoration of the system of confirmation page appears, click on OK.

  The system restore article is:

  http://support.Microsoft.com/kb/322756

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• express error airport; No DNS server address

  OSX El Capitan

  10.11.6

  MacBook Pro mid-2009

  Coupled with Airport Express Airport Extreme.

  Time Warner Cable improved the internet in our area and it took a new modem. At the new modem and Airport Extreme works with it, having to put the modem in Bridge mode.

  However the station Airport Express a few classrooms is now always flashing orange and the error says "there is no DNS server address.

  If I refresh the DHCP lease it will go green, but less than a minute he keeps flashing orange.

  What should I do?

  The way this is supposed to work, it's that your main router obtains the DNS server address of an upstream (on the ISP network) server. The wireless access point or router (router in bridged mode) next level gets its the main router DNS addresses. All subsidiary wireless access points get their the next upstream router DNS server address. Your Mac gets these addresses from the router or wireless access point when it gets its IP address.

  It is possible that you may need to turn off all routers, then feed their place in the order of the modem to the outside. But once that happens it is likely to have on them.

  If no joy in doing that, don't use the Admin user on your main router to see what should be these addresses, write them and enter them manually when you need it.

• Windows Network Diagnostics error message: "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Everyone,

  I'm trying to configure the WIndows server.  I am running the following: Windows Server 2012 R2 Foundation.

  I did the following:

  1. I crossed the Config Wizard on domain Active Services and installed it.

  2 then I joined the field.  When I reboot the server, I get the following error:

  A. "your computer seems to be configured correctly, but the unit or".

  "resources (DNS server) is not responding.

  A1.  When I put a static IP address on DNS, I can't go to the Internet.  Even if

  I can go to the tank and the PING of the IP address and everything is good.

  A2.  The I change the DNS to get the IP address automatically.  Then I can get to

  the fine of the internet, but I still get the same message about a problem with the

  DNS server.

  Can someone guide me please what the issue is here?  Thanks in advance.

  3. Furthermore, I can't see the new server name/information when I go into Windows Explorer

  as part of the network.

  A. I'll go in Windows Explorer and see the other machines when I look at the network level.  Yet,.

  for the that set up simply, I can't find it, please help.

  Thanks in advance.

  Jerry

  Hi Jerry,

  I would like you to post your question in the forums TechNet for assistance:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  I hope this helps.

• Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the address of the DNS server.

  Hello.. Any information on this error would be appreciated

  Would be useful to have more details about what was going on when this error appeared, so my answer will be quite general...

  Every time that you try to connect to a Web server using its internet name (for example, "answers.microsoft.com"), an impossible to establish connection to this server until an IP address for this server can be established.  It's like calling 'Joe'... you can not call Joe unless and until you know his phone number.  So out on the internet is a big "phone book" which is called "DNS server" which takes the name (for example answers.microsoft.com) and look up the number that goes with that name (for example 157.56.56.109).  The error that you mentioned will occur if your DNS server does not to come with an Internet address for the name of the server that you gave.

  HTH,

  JW

• Unable to connect to a network error: DNS server does not

  * Original title: unable to connect to the internet - yellow on network acess exclamation point

  other computers, my ipad and phone can all access the internet via the same wifi connection.

  even a direct lan connection did not help

  shows of troubleshooting DNS server does not

  Help, please

  concerning

  Turkish Lira

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, I understand that you can not connect to the network on your computer.

  I can understand how frustrating it can be when things do not work as expected.

  To better understand this issue, I would like to know the following information:

  1. What is the brand and model of the computer?

  2. did you of recent changes to the computer before this problem?

  3. you receive an error during the network connection code failed?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  We will try the following methods and check if it helps.

  Method 1: I suggest you clear the DNS cache and see if that fixes the problem. Clear the DNS cache forces DNS to query a DNS server rather than using the information stored in the cache.

  Follow these steps:

  a. click on the 'Start' button.

  b b.. in the search box, type "command prompt"

  c. in the list of results, click on invite and then click on run as administrator

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns

  Restart the computer and see if that fixes the problem.

  Method 2: If you still have questions, I suggest you refer to the suggestions of Meghmala responded on 28 June 2011 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/DNS-server-not-responding-keeps-coming-up-and-i/58fc8366-B2B2-4A8D-9E30-56a155635631?rtAction=1422395012673

  You can also see the following article for more information:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Hope this information helps, please respond with the requested information and the status of the question to get help. We will be happy to help you.

  
  

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• "" DNS server to error message "does not.

  Original title: has no Internet connection

  I had used my nokia phone as a modem with success for a few days. Subsequently, rather than connecting, I started getting a message saying that the DNS server does not. When I put in a different SIM from the same phone company, I am connected. Help, please.

  Hello Stephen,

  We get the DNS server does not no error for the following reasons

  a: The server that hosts the site may be temporarily down for technical reasons

  b: The DNS service in your computer is damaged or does not

  c: Firewall security or security software itself could have inadvertently blocked your PC to communicate with a Web site or some Web sites

  Clearing the cache of DNS (domain name system), forces DNS to query a DNS server rather than using the information stored in the cache. You can clear the DNS cache on changes to the websites that you manage, or if you receive repeated errors when you know that you type an address is correct.

  Empty the DNS and check if it helps to rectify the problem.

  a: Click the Start button

  b: In the search box, type command prompt.

  c: In the list of results, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d: At the command prompt, type ipconfig/flushdns hit then enter.

  Answer please if you have any questions.

• Error in the configuration of DNS server via the netsh command

  When I configure a local DNS server for my test-domain with the netsh command
  netsh interface ip set dns name = "LAN connection" source = static addr = 192.168.1.105
  I get a messge for error (translated from German):
  The DNS server is wrong or does not exist.

  But the local configuration of the DNS server always works perfect afterwards.
  The question now is: what netsh like not on my DNS server to produce this error?

  I get the same message too and the command works perfectly every time. It's probably a timing issue. I would ignore it.

• The DNS server after windows update error

  I installed Windows on my Mac.  It was working fine and then windows did an update and I started getting the server DNS error and could not connect to the Internet.  I restored the computer to an earlier time but then windows made an another automatic update and now I get the error of DNS server again.  I know that I can restore again, but it will last only until the next update.  What can I do?

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• Error, "DNS server does not" when connecting to the internet.

  IAM using windows 8 and iball netsetter. But I can not connect net. When I use mobile connect its connection. But in netsetter, it is not connected. Error troubleshooting network as "DNS server not responding do not. Help, please

  Try changin public DNS dns...

  How to change the address of the DNS public IPv4 DNS server in Windows?

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-networking/how-to-change-IPv4-DNS-server-address-to-public/56548e8d-eb9c-4FC5-807C-eefca5d278d0

• Unable to connect to wireless error: DNS server your may be unavailable

  Original title: DNS server your may be unavailable

  I can't connect wireless but I not see my wireless network connection signal works well. When I diagnose the connection, it is said that the DNS server may have problems.  My DNS server may be unavailable,

  Please advise me how to solve this issue. Thank you

  Hello

  1 did you do changes on the computer before the show?

  2. which version of the operating system are you using?

  Method 1:

  Check if DNS settings match the settings provided by your ISP.

  To do:

  a. click Start, type ncpa.cpl and press enter

  b. right-click on the connection you use for the local connection, and then click Properties.

  c. click to select Protocol Internet Version 4 (TCP/IPv4)and then click Properties.

  d. check if the default DNS server matches the one provided by your ISP.

  Method 2: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-us/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Error - cannot locate the DNS server of comments when try to use the Windows XP Edition computer remotely family assistance.

  Original title: cannot locate the comments of my windows xp home dns server.

  We have all two windows xp home, only difference, I can say is in the exception of firewall computers comments tab, there is no box remote assistance to check or uncheck.
  whenever we try I get it's message. Could not locate dns comments.
  something terribly simple became simply terrible.
  Thank you

  THANKS A LOT FOR YOUR CONTINUOUS SUPPORT. USING WINDOWS MESSENGER AND ACTIVATE THE REMOTE ASSISTANCE, AFTER FLUSHING DNS CACHE, WE HAD NO CONNECTION PROBLEM. ALTHOUGH STAY CONNECTED WAS A PROBLEM. NOW IDENTIFIED AS THE NETWORK ADAPTER ITSELF IS DEFECTIVE. I WAS ABLE TO SOLVE MOST OF THE QUESTIONS ON MY FATHER'S COMPUTER, IMPOSSIBLE WITHOUT YOUR TUTALIDGE. SO I HUMBLY GIVE THANKS TO PEOPLE LIKE YOU WHO UNSELFISSLY GIVE THEIR TIME. I AM OF COURSE SPENT ON CREDIT TO MY FATHER AND OTHERS SO THAT THEY TOO WILL SHARE THIS EXPERIENCE WITH OTHERS. AT THE PRESENT TIME, HE HAPPILY TALKS TO FRIENDS IN THE OLD COUNTRY IN THIS ONE. HIS 'SOCIAL' NETWORK ONCE MORE ALIVE WITH OLD FRIENDS. Thank you very much.
  RON

• Unable to connect to the internet, the error message ' primary DNS server does not and remote Firewall can block connection.

  Original title: Internet connectivity.

  Internet connectivity.  I can't connect to the internet from the computer at home.  Get the message "primary DNS server is online but doesn't react don't not to connection attempts."  Remote Firewall might be blocking connection.  Name of the filter GUIID mfe is connect-legend-v4.  McAfee Firewall is enabled.  Turned it off temporarily with the same result.

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Try resetting the TCP/IP stack.
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself

  How to reset the Protocol Internet (TCP/IP)

  http://support.microsoft.com/kb/299357 .
  If the same problem still persists, then try the next method.

  Method 3: update the network driver.
  Steps to update of network driver:
  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select the network card device and right click on it
  d. now, select Properties.
  e. in the Properties window, on the driver tab, click Update driver.
  f. after the installation of the updates, restart the computer.
  For more information visit:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly.
  Method 4: Definition of obtaining DNS on automatic

  a. Click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  i. Repeat steps for Internet Protocol version 4 as well.

• Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

  Hello

  I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:
  "There could be a problem with one or more network adapters on this computer." Help, please!
  Thank you!

  Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.