Windows 8 Pro reports the following error SBDDesktop.exe

Similar Questions

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• When I try to use the Windows updates to and the following error message: Windows update cannot currently check updates, because the service is not running

  have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer

  Original title: update windows

  Solution 1:

  Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  Solution 2:

  You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:

  net stop wuauserv
  regsvr32 %windir%\system32\wups2.dll
  net start wuauserv

  If this does not help, try Microsoft Fix It service to reset your Windows Update components:

  http://support.Microsoft.com/kb/971058/en-us

  I hope this helps.

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you enter the user name and password in Windows Mail I get the following error: Server error: 0x800CCC90, error number: 0x800CCC92.

  Difficulties of username and password.

  In Windows Mail I suddenly wonder for the user name and password.  I fill them but receive no mail from mu.  I get the message:

  Account: 'pophost1.classicfm.net', server: 'pophost1.classicfm.net', Protocol: POP3, server response: '-ERR failed the connection. ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92.

  Please can you help me?

  Hello

  ·         Were there any changes to the computer, lately?

  Method 1:

  (a) start the Windows Messaging mail client.

  (b) click on 'Tools' from the main menu and choose "accounts".

  (c) a pop up will appear showing you all the email accounts in Windows Mail. Select the one that gives you the error and then click on the button 'Properties'.

  (d) another window pop up displays all parameters associated with this account.

  (e) under the "servers" tab check the 'e-mail username' and 'password'. One of them would certainly incorrect which translates the ID of Windows Mail error 0x800CCC92

  (f) to avoid having to enter the user name and password each time, check the box in front of "Remember password".

  (g) once you make the appropriate changes, click on the button 'apply' then 'OK'. Close the other pop-up window

  Method 2: Remove the existing from Windows mail email account and create a new one following the link provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

• Windows XP Pro reported the C drive as a removable drive

  I replaced my drive hard sice he was damaged. I replaced it with a blue wd 320 caviar. I installed windows xp (kept getting error that changed SATA to IDE mode and installed), but now my main drive is 'I' and 'C' is labeled as a removable disk. want to make the 'C' my main disk so I can install some programs.

  "mhoyas" wrote in message News: * e-mail address is removed from the privacy * .com...

  I replaced my drive hard sice he was damaged. I replaced it with a blue wd 320 caviar. I installed windows xp (kept getting error that changed SATA to IDE mode and installed), but now my main drive is 'I' and 'C' is labeled as a removable disk. want to make the 'C' my main disk so I can install some programs.

  Recommend that you try a reinstall. Disconnect any external devices and internal hard drives except a new drive and the floppy and CD drive.
   
  You need the SATA drivers on a floppy disk (see below if you do not have a floppy drive.)  Start the installation from the XP disc.  Chose to delete all previous partitions.  At the point where he requires special drivers (key F6), insert the driver disk into the drive and allows the computer to read.  The rest of the installation should lead to partitioning and formatting the drive then a facility.
   
  If no floppy drive then change the bios in IDE compatibility mode.  Install Windows by removing all partitions and to rebuild a partition, format and install it.  Once windows starts to install the SATA drivers and then change the SATA mode bios.

• Windows not start displays the following error message

  (X) /8130/ Realtek RTL8139 810 x
  Fast Ethernet PCI v. 2.16 controller (041224)
  PXE - E61: Media Test failure, check cable of
  PXE - MOF: Existing PXE Rom
  No Bootable - insert the startup disk, and then press any key
  When I insert the factory OEM disc, everything works well, but without it, the error message comes up what can I do to start normally

  discodazz1,
  The information you listed are oriented to the network card and he doesn't see any boot device.  The first thing I would do is to check the BIOS settings and make sure that your drive is seen correctly and that the boot order is set to boot from your 1st CD then your drive hard 2nd drive.  You will need to check with the PC manufacturer for assistance with the BIOS settings.

  Then I would try the steps listed in this thread: XP without boot troubleshooting

  If you are able to enter safe mode but not any other way or you can't in safe mode then I would do the following.

  If you can boot into Safe Mode with command prompt, or if you have a XP CD and you can boot into the Recovery Console, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to open an ftp site in Windows Explorer, I get the following error: "this FTP site cannot be seen in Windows Explorer.

  I was able to open it in the past with XP and some computers with Windows 7.

  Compare the two computers and see what is different between them.  Could be a firewall issue, or a suite of antivirus blocks or possibly a malware infestation, causing connectivity problems.

• Cannot install updates for Windows Vista. Get the following error: A 80071, 30. Help!

  I tried to install the updates and I get notice of failure with code A 80071, 30.  Help! I tried installation manual, automatic restart of the diagnosis.

  Thank you!

  Vista SP1 or SP2 installed?

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  What is your full version of windows (32-bit or 64-bit) and service pack level. (Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows XP Professional Service Pack 1;)) Windows Vista Edition SP2 family)?

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  A 3rd party firewall is used instead the native Windows Firewall?

  What other software products anti-malware are installed and running?

  What updates you trying to install? (Number of KB)

  Please do it in your next reply.

  Information you provide will help someone to provide you with a relevant solution.

  Go to the next article via Internet Explorer (only) & run the fix it in DEFAULT mode and AGGRESSIVE 50202 .

  Try to reset the Windows Update components and see if it helps. See the article below mentioned the same thing.

  How to reset the Windows Update components?

  UTC/GMT is 20:52 on Saturday, December 17, 2011

• Blue screen with the following error: ntkrnlpa.exe & win32k.sys

  Hello. I tried to play Tomb Raider 1 for the last two days and it won't let me. (Windows)

  So I run the program BlueScreenView and he tells me these

  http://i42.Photobucket.com/albums/E310/Morgoth_Bauglir/1_zpsd42f1ca0.jpg

  http://i42.Photobucket.com/albums/E310/Morgoth_Bauglir/2_zps7368d724.jpg

  Advice as to what I should do? Thanks in advance!

  EDIT: How can I show you guys the minidump files? I want to, but I don't know how. Where can I find em?

  After sixteen days, I found the solution to the problem.

  Run directly worked!
  Here's how I did it:

  #1
  I used image (game.gog) file that is copied into a simple directory GOG, I did without spaces (for example C:\dosgames/tr1)
  Then I renamed to. ISO and also copied the other files in the folder TOMBRAID (exe etc.) and mounted the entire folder on dosbox directly. (just drag and drop the folder for your shortcut dosbox and he will do it himself)

  #2 proceeded to mount the image file (I named it TR1. ISO) with the imgmount d 'x:\path\TR1.iso' t iso command
  #3 now that the image file is completely loaded on dosbox, everything you have to do is type the name of the .exe, for example, type "tomb.exe".
  #4 to play the game.

  Please mark this (my own answer) as an answer because I'm not myself! Thanks to all who helped me without worrying!

• VC die randomly and the windows event viewer will display the following error message

  Hello

  in the last time we are experience a lot of vc crashes and the windows event viewer shows the following error:

  ORA-01483: invalid length for the DATE or NUMBER variable binding

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  ORA] ORA-12899: value too large for column 'VPXADMIN '. "" "" VPX_VM '. "" IP_ADDRESS"(real: 40, maximum: 16)

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  There is no update or modify the software to vmware esx/vc or oracle.

  Anyone has the same problem or have a solution/fix for this problem?

  Environment:

  Oracle 10.2.0.3 DB

  Virtual Center 2.5 U3

  VMware ESX cluster

  Vmware ESX 3.5 Server Patchlevel 1 x 143128

  3 x Vmware ESX 3.5 Server Patchlevel 123630

  This is a known bug in oracle - 10.2.0.3. Upgrade to 10.2.0.4 or install the Oracle patches 6085625 and 6452485 (as far as I remember you just one of them, but for the moment, I can't say that one)

  --

  There are 10 types of people. Those who understand binary and the rest. And those who understand the gray code.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  8.1 for Windows cannot be installed on my Sony Vaio Duo 13! An error pops up asking me to contact the OEM manufacturer for BIOS update. Checked in the event log and saw this error: Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  Any idea? I'm redownloading the update now.

  More details

  Log name: Application
  Source: Windows Error Reporting
  Date: 17/10/2013-20:26:04
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: SAM-DUO13
  Description:
  Bucket of error, type 0
  Name of the event: WindowsUpdateFailure2
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 7.8.9200.16715
  P2: 8020002e
  P3: 0E51874C-8E6E-47B6-A835-CCAEEF3D9997
  P4: download
  P5: 101
  P6: unmanaged
  P7: 0
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 49ede667-3727-11e3-bea8-fd232fd2f50b
  State: 262160
  Bucket Hashed:
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1001
      4
      0
      0 x 80000000000000
     
      12180
      Application
      SAM-DUO13
     
   
   
     
     
      0
      WindowsUpdateFailure2
      Not available
      0
      7.8.9200.16715
      8020002e
      0E51874C-8E6E-47B6-A835-CCAEEF3D9997
      Download
      101
      Unmanaged
      0
     
     
     
     
     
     
     
     
     
     
     
     
      0
      49ede667-3727-11E3-bea8-fd232fd2f50b
      262160
     
     
   
  

  I found the post on the Sony support site. Give it a try.

  http://community.Sony.com/T5/VAIO-hardware-networking/availability-for-Windows-8-1-upgrade-for-VAIO-PC-s/m-p/204481#M13112