WINDOWS 8 STUCK IN UPDATES OF RETURN!

Similar Questions

• Windows 7 stuck at updates updates

  My Windows updates is stuck and verification of updates.  I have already used or tried the following but WITHOUT success.

  1. tried "disk clean up" that did not work... unless there was something that special, I missed.

  2. tried https://support.microsoft.com/en-us/gp/windows-update-issues/en-us?wa=wsignin1.0

  3 https://support.microsoft.com/en-us/mats/windows_update/en

  4. when I ran among the fixes above I had a return this error 'Code error 0x8024402C.

  I tried this fix on youtube, but it did not work to fix the error.  The error always appears, and windows update was still stuck.

  https://www.YouTube.com/watch?v=rzZaRVqKHfo

  Please advise, because Microsoft is not helping at all... when comes to their Windows Update.

  Only KB3172605 solves the problem of update.

• Windows Vista stuck in update 3 of 3 loop after updates.

  updated the title: Can not boot Vista after updates

  I'm stuck in the update 3 of 3 loop and cannot restore my system by using the system restore or the Vista CD... Can anyone help? Y at - it a solution or should I reinstall?  thanksRemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi royfos,

  Do you have a code error message when you try to run the system restore?

  Check if you can get into safe mode. If you manage to get into safe mode, then you can run the restore of the system from there. Otherwise, another option is to perform the Startup Repair.

  Method 1: Troubleshooting Safe Mode

  Step 1: Start the computer in safe mode

  Safe mode is an option of troubleshooting for Windows that starts your computer with only basic services and features.

  To get into safe mode, check out this help article: , start your computer in safe mode

   

  Step 2: Run system restore

   

  For complete help, see this article:System Restore: frequently asked questions

  Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.

  Method 2: Startup Repair

   

  Startup Repair is a Windows Vista recovery tool analysis of missing or damaged system files that may prevent Windows from starting correctly. Run it and see if that fixes the boot problem.

  Reference:

   

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Also take a look at this article to learn more.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista stuck with "update configuration".

  Whenever I stop Windows Vista, System stucks with "Configuring updates" appearing on the screen.

  The original post has been read.

  The original post has no importance now.

  What you do not understand, is that you now do a logoff and reboot for a fresh start of windows.

  The problem should be gone because the download folder has been emptied.

  and if the problem is still there, start the system in safe mode and then rinse the folder download again.

• Windows 7 STUCK of updates

  Hello

  I had posted a question on this at the time and received a response which has worked so far.   See below

  I recently did a new install of Windows 7 pro and had the problem installing updates.  So I followed the

  steps below and I tried to install the KB3020369 and received the error so I then installed the KB3172605 with no.

  problems.   After doing this, I tried to continue with the updates and it took forever so I tried to install the KB3020369

  same mistake.   There is an KB976902 update that is on the machine and I can't uninstall.  Either I'm stuck way check

  updates for more than 24 hours.  Will begin again this afternoon and let it run all night.  Any suggestions

  Thank you

  Karen

  Hello klmorgan-Office [365]. Your question about the Microsoft community received a response from Canadian technology. Title: updates - stuck Win 7   Response Fix tetraethyle3, but I would advise Windows Update service be stopped and a reboot occur in addition to the definition of never. Many of us have worked on a better set of instructions.  I'll include it here. Feedback is more than welcome... August 18, 2016 Windows Update has become very problematic for users of Windows 7.  During the past year, we have worked to find a solution that works for you.  We found one that works very well for most.  We know that for some it works well for August 2016 until 2 September Tuesday, known as Patch Tuesday. We hope to update for September. We emphasize that, to do this, you must follow exactly as described. There are two main types of installations of Windows 7: 32-bit or 64-bit.  You know what is installed on your computer.  Click on the globe start, type in the box system. Choose system information in the list.  The abbreviation for technology for 32-bit is x 86 and 64-bit x 64 Start Windows Update, and change the setting for never to find updates. We recommend that you only keep this setting.  Then Windows Update will be automatic.  From there, you are responsible for departure and the installation of updates.  We recommend to you a few days after the 2nd Tuesday of each month. The process begins by ensuring that there is nothing running that will prevent the update to work correctly.  Click on the globe to start and type services in the text box.  Click Services in the list that appears.  In the window that appears then (its alphabetical), find Windows Update.  Right click on it (left click if your mouse is set for left-handed people), and then choose stop. Restart your computer. You will now download and install manually updates one or two.  In most cases, only the first (KB3172605) is required.  If that produces a result that indicates the update is not suitable for your computer, you must first install the 2nd day of these (KB3020369), and then install the first (KB3172605).  Choose one that is for your machine - 32-bit (X 86) or 64-bit (X 64). KB3172605: 32 bit https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU 64 bit https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU KB3020369: 32 bit

  
  https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU 
  64 bit
  https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU
  1. After rebooting your computer, wait for about 10 minutes until that Windows Update performs its tasks.  Do not use the computer for other purposes during this waiting period.
  2. Start Windows Update.  It will take that a few minutes to come up with a list and download updates you select.  The process is quite normal because it was always from that moment.

  If your computer has not been updated for a long time, it may take longer.

  Read this response on the Microsoft Community.

  --------------------------------------------------
  NEXT STEPS *.
  This answer was helpful? Give Canadian Tech of congratulations!
  [Vote as helpful]

  Canadian Tech response answered your question? So let the community know!
  [Mark this answer as your answer]

  You want to unsubscribe from this thread?
  Click here to go to the thread, click the original message, and then click Stop messages.

  * Login required. When you open the thread, you will see that your action has been automatically saved.

  * The position proposed by the facilitator at the appropriate forum category (for Windows |) Windows 7 | Programs Windows | Windows 7 | Updated, backup, recovery &). **

  This is probably your solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• Windows 7 stuck on update "restart your computer to install important updates"

  Yesterday by mistake I upgraded Windows 7 to 10.  After watching 10 hours, I returned to 7.  System check updates to day and put some apparently and followed with "Restart your computer to install important updates" - which cannot be updated while the system is using them.  All that seems fair enough.  However, the same reboot message was received after several reboots (including cold boots).  Cannot restore to last good config - probably due to their loss in the upgrade.  FixIt MS and solving problems of updating has not solved the problem.  Is there a switch somewhere that I can reset?  Help please.

  Is this the same computer - not necessarily the same problem - as in one or more of these previous threads of yours?...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-7-Media-Centre-cursor-and-display-issues/4c0f3687-6767-4d9c-A65B-5cc27697018f

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/SATA-RAID-array/41d9c55a-4ABC-4e0d-9bb3-ca4d49ceefc2

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_scanning/clickgiftload-how-can-it-be-removed/5cf04921-395c-E011-8dfc-68b599b31bf5

• Windows 7 stuck on updates

  Hi I just finished one of my Compaq laptop factory reset. All was going well until I downloaded the SP1 (with success), then asked me to download Windows Update agent 7.6.7600.320 (successfully). Now, the laptop is continually 'check updates' its been like this for 24 hours, can someone help and advise

  Try the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• Error Windows Updates 'configuration of Windows updates fail, returning of the changes.

  Updates to the title: original Windows.

  That means 'configuration of the Windows updates fail, returning from changes '? My laptop has been updated but got stuck on 12%, and would not go further. It is restarted 3 times and only went up to 12%.

  Was actually able to solve this problem through more research. It turns out that his receiver of wireless mouse and a SD card was stalled the installation program. I don't know why but I turned off the machine (long press the button), remove, checked all other ports, block tire and cord then put back the battery and card, turned on and it ran through the installer without problem.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Windows switches mode 'sleep' and is now stuck at 'update 27 of 105.

  Help, please!  Last night, I closed my laptop and he told me it was going to continue to install updates.  105 ofr them.  I have not thought very well no problem because I was going to bed anyway.  So I close the lid and go to bed when he was to be updated on 27.  When I opened this morning - a full 15 hours later, it was still updating the 27.  So I waited and nothing happened.  It has not frozen as the blue circle turns again.

  I turned off and removed the battery and then lit it back to see he's trying to return to the update of the 27.  So I tried from the laptop in safe mode and now it says "update configuration" but in a lower resolution. fun.  Is it possible that I can start windows and circumvent the updates?

  Hi Rab_Random,

  What Version\Edition of Windows you are running on your computer?

  Step 1: Run system restore and startup repair, you can follow the steps mentioned in the article below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  (See method 1 article)

  Step 2: Delete the file pending.xml via the system recovery command prompt

  (As in step 1) access system recovery options. You can also check out the link below

  What are the System Recovery Options?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Go to the system recovery command prompt and run the following commands

  ICACLS c:\windows\winsxs\pending.xml/grant administrators: F

  del c:\windows\winsxs\pending.xml

  Once the command is executed successfully, check if the problem is solved and let me know

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update to Windows 7 stuck on 'Check updates'

  I've updated 31 updates yesterday because it had not been done in awhile and now it is stuck on updates. I tried some responses on this site but had no luck.

  Install the latest version of the Windows Update, in KB3172605 client included.

  https://support.Microsoft.com/en-us/KB/3172605

  Set automatic updates to 'never check updates' and restart Windows before installing.

  Best regards, VZ

• Upgrade Windows 10 stuck updates

  Upgrading Windows 10 seems to be stuck on updates.  If anyone has experienced this?

  Original title: upgrade Windows 10

  Run the media tool to upgrade now.

  If no other problems working through these steps for overcoming failures in Windows upgrade 10

• Windows 7 stuck on the installation of the updates after the testore system

  HP Paviluon g7 1322nr Notebook PC

  Had to perform system restore, now Windows is stuck on installing update 3 of 177.  That is for more than one hour.

  In this case, run the tool in troubleshooting Windows Update from the link below and see if it works:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If the problem persists, reset your Windows Update components by following the instructions mentioned on the link below and try to download the updates again:
  https://support.Microsoft.com/en-us/KB/971058

  If the problem is still not resolved, run the system update readiness tool from the link below and see if it works:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Hope this will help you.

• Update of Windows 8 stuck at 12%

  Update Windows 8 stuck at 12%. Frustrating because I had to deal with the error 13% already. Any ideas? Thank you!

  Hi all

  Update for Windows 8 (KB2771431) was released in December 2012, which the fixed an issue that was causing this update stops responding at 12% and caused also updated KB2756872 to stop responding to 13% of configuration updates.

  If you hide one of these up-to-date or disabled the automatic updates to avoid this problem, you can now activate or restore your updates and search for new updates.  Details on how to restore updates can be found here.

  To search for new updates:

  1. Type Windows Update in the start screen, press or click settings, and then tap or click install optional updates.
  2. Press or click the link in the upper left corner that says check the updates.