Windows 8 will not connect to internet

Similar Questions

• iPad will not connect to internet

  Hello

  Recently I replaced my router wireless with an old faithful that d-Link DSL - 502T cable modem as I have now 2 extreme airport to handle a Wi - Fi. I have now a much faster internet access on my Macbook Pro, but my iPad 2 now will not connect to internet.

  Airport utility on the iPad shows that the internet is disconnected, but I don't know how to solve this problem.

  The two airports are configured in Bridge mode. Help someone?

  If you have LAN - 502T running as the main router.

  Bridge the airport should simply pass the DHCP via the Dlink but sometimes it's a failure.

  The two AE connected directly to the modem or the other?

  I would recommend the static method of intellectual property.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  In this method, you must first AE plugged directly to the Dlink and the second AE connected in the first and bridge... it will dhcp to EI and is often a better configuration with Apple gear. Worth a try.
  

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• Windows 7 will not synchronize with internet time server

  Windows 7 will not synchronize with internet time server

  Had to go to services.msc and allow the windows time server to access the computer. Go to run and type services.msc hit enter, do scroll down to windows time server and more he probably stopped, just restart. Thanks to you all

• HP dv6815nr: Wireless Card will not connect to internet

  Hey people, trying to make my old laptop back to semi in working order.  Did a fresh install of Vista, but the wireless card for some reason any will not access the internet, says "local use." Internet works as the other computers in the House are connected on the wireless and when I connect the ethernet, features of connectivity cord.  Crossed and uninstalled/reinstalled the driver.  I have no special security here, just the windows firewall, which I disabled the thought that he could block, but it was not the question.  Other ideas you can come up with that would be great.  I have also included the hardware ID for my wireless card.  Pilots have been taken off this site from hp for my computer model as well.

  PCI\VEN_168C & DEV_001C & SUBSYS_137A103C & REV_01

  Hello:

  You need to install a driver update... the problem is probably your router is too new for the old driver wireless deal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  Go back and activate your firewall if you have not already done so.

• Windows 8 will not connect wireless automatically and sfc/scannow error

  Hey,.

  I have a problem and I hope that some of you may be able to answer. I have a desktop running Windows 8 x 64 which, no matter what I try, just usually don't forget I connect WIFI at home. Every time I start the PC I have to go into the details again once I tried everything (several times), new drivers and virtually all of the suggestions emanating from the research on various forums.
  I say this because when I tried to run the "sfc/scannow" in an elevated cmd, it comes up with an error.

  http://www.Neowin.NET/forum/uploads/monthly_05_2011/post-336322-0-01396700-1305440203.jpg

  Error is the same that above, looking in the CBS.log newspaper he does not mention that it is unable to repair the files of numerours including some relationships Wi - Fi so I don't know whether they are connected or not.

  The wireless network card is the USB - N13 by Asus.

  The wireless works fine on my laptop and my GFs Macbook.

  Anyone has any idea as how to fix WIFI details don't forget not the "sfc/scannow"?

  Kind regards
   
  Jens

  Hello

  I would have you try responses in the thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Also applies to Windows 8.

  We know how it turns out for you.

• D7000 will not connect to internet after reinstalling

  Hello

  We moved our D7000 modem router from one room to the other and now it does not connect to internet at all. I spoke with our ISP and everything is fine on their end. I connected the modem and reset our ISP connection & the password, and the ISP did the same thing, without effect. The phone line has been tested, it's ok. I swapped the cables to make sure that they are not defective. I moved the modem to return to the old location, but now it does not work there either.

  WiFi seems to be ok and all our devices (phones, tablets, computer) recognize the wireless network and modem, but there is simply no internet connection. It is bizzarre! Nothing has changed, there is no new hardware, no updates or upgrades, the ISP is always the same, the only thing that differs is the location, in the same House.

  The lights on the router modem are as follows:

  Food - white

  Internet - amber

  DSL - off

  WiFi - white

  Any ideas what I could try to make it work again? Should I do a factory reset on it? This could be the cause? Move a modem do not stop working. We only had since November so it isn't old yet, and it has been working fine so far.

  Any help at all would be greatly appreciated!

  Päivi

  Hello

  It has been a while now, but I thought I would update this for anyone interested or affected by the same problem we did.

  After weeks of back and forth with the ISP and try and test anything and everything we could think, including the replacement of the D7000 in store warranty (not just once but), and nothing is helping, the ISP finally filed a foul for us and sent a CET. And what do we know? There was a flaw in the riding of Telstra which he had found, and which caused our internet connection fails. After that which has been set, we are online again. The line still falls here and there and the phone line is cute, but at least we are connected.

  And now I'm fighting with the ISP for refund during all these weeks we were disconnected while they refused to be a mistake for us and have someone out. Time for a new ISP, I think!

  Hope this helps someone else with the same problem there.

  Thank you

  Päivi

• Windows Vista Business ed. reformat - my computer detects the network but will not connect to Internet

  Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.

  To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).

  Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

  ipconfig/release

  ipconfig/flushdns

  ipconfig / renew

  Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows messenger does not connect to internet

  Hello, I'm on vista Home premium and have changed my router modem. My office has accepted the router and messenger works very well. However, the laptop will only sign not to messenger and when I go in the properties and connections, it shows that messenger is not connected to the internet and that the computer is connected via a wired connection. (not correct, it is wireless)

  I tried to change this without success. I also tried ot uninstall Windows Live so that I can re - install, hoping that he would then recognize the network parameter, again without success.

  Can someone advise please.

  Thanks Brian

  Hello
   
  The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
   
  http://social.Microsoft.com/forums/en-us/category/windowslive/
   
  http://windowslivehelp.com/community/

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Windows 7 will not connect to the wifi network

  My Asus laptop (that I had for a year) all of a sudden, stopped to connect to the internet. The problem is not in my modem or ethernet, connection that work well for my mac. I click the network button and it says "network 4. No internet connection. My usual ssid will not be at the point in the available connections. I don't know what to do! The normal customer service does not know

  Hi AedanC,

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description provided, looks like you are facing a problem when accessing wireless network.

  It would be great if you could answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  See the following Microsoft article and check.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Printer will not connect to internet

  I have a Photosmart Premium all in one Web C309n printer, I have it on a wireless network. When I try to download apps from its touch screen, it can not find the internet connection. I tried with the ethernet cable and get the same results. I have the latest drivers installed and it prints good laptop, as I was never able to scan directly to him to the laptop. If I open the application on the laptop, it works very well, I think it would be faster to go from the screen touchscreen printer. In any case, I can live with, I would like to get my Google calendar to print or view I could be interested in new applications.

  Thank you to me for a new direction.

  There is another problem that occurred after updates removed then reinstalled, I get an error message at startup which said. C:\programfiles\HP\HPphotosmart6520series\bin\hpstatusbl.dll

  How can I get rid of this nuisance?

  

  Hello

  To connect your printer to your wireless network, you will find need the menu internet wireless option on the front panel of your printer.

  After that you will find this option and select internet wirless, you will see the available WiFi networks and you choose your own wifi network and enter the password for wifi for her. Once this operation is completed, your printer must connect to the internet.

  I recommend you to install the most recent drivers that place to the last issue you mentioned.

• Computer laptop HP Windows 8 does not connect to internet through wired or wireless

  My portable 64-bit Windows 8 is telling me wired LAN not connected not Realted PCIe FE Family Controller and wireless LAN not connected Microsoft Wi - Fi Direct virtual card. My laptop product # is anb C2M44UA #ABA series # {personal info deleted}.  What should I do to get connected to the internet?  Thanks in advance for the help.

  Hi Wendy,.

  Take a look at this documentand let me know if the troubleshooting steps to help you solve your problem with connecting via wifi.

  Good luck!

• Equium A100-147 will not connect wireless Internet!

  Hello
  For these last months that my cell phone was able to connect to internet, I think I must have downloaded a virus that deleted the necessary drivers for the wireless card to work, it is still all access points, but it does not connect.

  I tried to reinstall the operating system (Media Center) a few times - that didn't work, and now I have some drivers that I got from my computer on a toshiba Web site - they don't work anymore.

  I'm stuck now because I've tried everything I can think of and nothing works, so I hope I can get some good advice on here :D
  Thank you

  Hello

  I really put t understand why the installation of the OS is so hard :(
  You have received the Toshiba Recovery CD. On this CD all the drivers and tools are already preinstalled.
  You insert this CD into the CD/DVD to boot from the CD drive and the installation will begin. After 10-15 min the installation will end and the laptop should be ready for use.

  Then configure the WLan access again (encryption, SID, MAC address, etc.) and enjoy.

• WRT120N will not connect to internet

  Hello

  My router was working so far. For some reason, I disconnected the internet cable and plugged. After that, it does not connect to the internet.

  Based on the forum I acceded to 192.168.1.1, it will display the administration page. I have reset to the factory settings and turned off the router for a while and turned again but it does not help.

  This problem is not only withmy laptop computer. Grateful if someone could help me solve this problem. Thank you.

  Kind regards

  Combot.

  If you have DSL connection, these 2 reasons may be applicable. It's either you must assign the PPPoE router (you must have a username and a password from your service provider.) Or you might need to change the local router ip address. For more information, please visit this link

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.XML&PID=80&r...

• Windows Vista will not synchronize with internet time server

  I am running Windows Vista Business SP2 and Norton Internet Security on a Lenovo T61.  All updates for Windows, Norton and Lenovo have been applied.  When I try to synchronize with a time server Internet, I get the error message ' year error occurred while synchronizing with time.windows.com "I tried each of the other servers listed time and still get the same error message.  I spent reviewing the configuration of the firewall in time of Norton Internet Security and S32 and port 123 are enabled.  I tried to synchronize with the two Norton Internet Security Firewall on and outside, with the same results. I have internet google and looked for a solution of Microsoft.  After reading all the posts relating, I tried the following:

  running administrative invite

  net stop w32time

  w32tm /unregister

  w32rm /register

  net start w32time

  Each performed positively.

  This has not solved the problem.  I then ran:

  w32tm/config /update

  This is performed in a positive way.

  This has not solved the problem. I then ran:

  w32tm/Resync /rediscover

  He responded with "the computer did not resync because no time data was available"

  I then ran:

  w32tm/query/status

  He responded with "last successful synchronization time: not specified.

  The local Group Policy Editor reads for providers of Service/Computer Configuration/Windows Administrative Templates/time/system time

  Configure Windows NTP Client not configured

  Enable Windows NTP Client not configured

  Enable Windows NTP server not configured

  In summary, it seems that my computer has never synchronized with an Internet server time.

  If you need additional information, please provide specific instructions on how to get it and I will provide.

  From time to time, I checked to see if I resync of internet time.

  Out of the Blues started windows resynchronize.

  The only change I can think is that AT & T reset head of communications AT & T defaults shortly before he started work.  This tends to confirm my opinion that it was a problem of communication.

  PROBLEM SOLVED!