Windows account profile error message
To access my user account from my computer, I get an error message which expresses that Windows cannot recognize or check my user profile. Thus, any changes made to all programs records not (except documents) in Word.
Recover your profile damaged by using the following procedure:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >
HTH,
JW
Tags: Windows
Similar Questions
-
I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB
Hello
Thanks for the reply.
I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.
Method:
Reset permissions
============1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
2. go to your desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
5. copy the following commands, and then paste them into the opened Notepad window:off @echo
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = fSubinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f@Echo =========================
Completed @Echo.
@Echo =========================
@pause6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
8. you will see a window of type BACK treatment.NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."
If the same thing happens, move to the next step.
Run the upgrade by using the built-in Administrator
================================
1. click the button start-> all programs-> Accessories.
2. right click on command prompt and select "run as Administrator".
3. click on continue when user account control window appears.
4 copy the following command and press ENTER:
NET user administrator / Active: Yes
5 restart the computer and then log on the computer of this administrator account.
6. run the upgrade to windows 7.
Hope this information helps you.
-
I have NO SOUND on my computer and the Windows Media Player error message is C00D11BA.
To try to solve the problem that I discovered in the Audio tab in sounds and Audio devices properties, there is No default unit in the area of audio playback and No default unit in the peripheral zone of MIDI playback. In addition, the general tab in the properties of the device Audio USB says "this device is working properly" and that it is enabled as described in the use of the device box. The general tab of the device Audio USB also said the "Driver is enabled and working properly."
I am able to record dictation through a program of Dragon NaturallySpeaking.
I'm on Windows XP Pro with Service Pack 3, and before that I lost sound had not recently added that any hardware or software even though I may have uninstalled some rarely used program.
Hello
The usual cause of the error C00D11BA is when the sound card drivers are not installed or outdated.
Windows Media Player cannot play the file because there is a problem with the audio device, such as a map his or her controller.
Method 1:
You can follow this link & check if the problem persists.
Windows Media Player Error Message help
Method 2:
Diagnose and solve the problems of Windows audio playback automatically
http://support.Microsoft.com/mats/AudioPlayback/
You can also try the manual steps provided in the below mentioned link and check.
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/en-GB
Hope this helps and keep us posted.
-
Original title: Windows Photo Gallery problems
I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.
- NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012
Hi David,
1. have you made changes on the computer before this problem?
2. are you referring to the Windows Live Photo Gallery?Please follow the methods and mark the question below:
Method 1:
Fixed problems with Windows Live Photo Gallery that does not:
http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/Method 2:
You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
I hope this helps.
-
Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet
Hello
This can help you:
Download and run the Flash Player Uninstaller, as Flash can get damaged.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
-
My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver. How to stop this message?
Visit the HP website and download the driver you need.
Good luck.
-
Sometimes the Audio files are not played using Windows Media Player. Even if I'm not able to turn on/off the audio. Settings audio button is not working too.
Error: Windows Media Player Error Message C00D11B1
When I rebooted my dell Inspiron laptop, this problem does not occur, and I am able to hear the audio. Let me know the fix for this problem permanently.
Hello
If you're having trouble playing a song or video, it may be because of the codec problem. I would suggest trying the following steps and check if it helps.
Method 1:
Run the Windows media player convenience store settings and check. Follow the steps to run the Troubleshooter:
- Press the Windows key + Q on your keyboard and type Troubleshooting and click Troubleshooting under results of research.
- Now, click on programs.
- Click the Windows media player settings to run the troubleshooter.
- Click on library of Windows media player to run the troubleshooter.
Method 2:
I suggest you to refer to the help article and check if it helps.
Windows Media Player C00D11B1 error
http://Windows.Microsoft.com/en-us/Windows7/C00D11B1
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]
Here is a list of the ports/areas to the whitelist to access the DPS Server problems
-
Windows Mail 0x800CC18 error message
I'm sorry if someone has already replied to this question, but I am a novice and don't know if these answers apply to my question on "Windows Mail".
I get the error message e ' account: 'Denise', server: 'incoming.verizon.net', Protocol: POP3, server response: '-ERR invalid command', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC18.
What I'm doing. Can someone help me please.
Thank you.Click on the Tools menu, click twice on the e-mail account
Click on the Server tab
Uncheck 'require login with secure password'
Click ok and close
You should be able to receive emails
-
Windows Live Mail error messages
An apology from a novice no-tech. I constantly receive the WLM error messages. I suspect it's to do with my 'settings' so some would help here. The pop - EMs up every 10 minutes. My default is Internet Explorer. The errors tab is always empty, according to the Prnt screen attached.
The Task tab still says "check for new messages on...» (my email addy) "hope you can help here, thank you.
https://www.dropbox.com/s/h265b9pxinv15uq/ErrMg4.PNG?DL=0
Thank you zig - zag, I got the answer of Winston in the newsgroup Microsoft.public.windows.live.mail.desktop Seems, the problem was newsgroup instead of mail. Its solution "right click on say, news.eteral - News September." Click on 'Properties' in the 'General' tab, make sure that the checkbox "include this account when checking for new messages" remains... not controlled.
-
Windows backup / reader Error Message
When I try to create an image of sytem, I get a Windows error message. Legend of error: backup of the files. The error section reads as follows:
The reader \\?\Volume{4abe5988-c73f-11df-8bbd ... contains errors. The error text is:Windows has detected corruption of file system on \\?\Volume{4abe5988-c73f-11df-8bbd-806e6f6e6963}. You should check the drive to the case before you can restore it.
Check the drive for errors IGNORE OK
By clicking on "Check the drive for errors" a new dialogue "Check Disk... "automatically opens with options to resolve the errors of system files and Scan for and attempt recovery of bad sections. One or two control options and clicking Start Windows returns a new error: "Windows could not complete the disk check.
To create this situation, I take the following steps:
1. start > Control Panel
2 backup and restore
3. create the system image
4. Select the backup location > OK
5 backup C:\ (System) and RECOVERY (System) > next
6. the error occurs.
If I ignore error ther, the backup image is created, but because of this error, I'm not very confident that it will work if necessary :-(
Background:
1. I created a system image on 17/12/12 without problem (no error)
2. I have all the windows of critics and other updates of software installed MS (Windows last updated 11/01/2013)3. I tried a restore point from before the windows update and it failed.
4. my PC has been partially infected with "System of Progressive Protection" malware a 09/01/13. I caught it starts to open the closure of the PC. I ran MalwareBytes, Advanced System Care, MaAffee Security Center, Super Anti-Spyware, ChkDisk, sfc scannow and two applications separate from tune-up Dell PC with Global hard drive Diagnostics. All indicate that the virus has been removed successfully, and that there is no error in drive on my PC.
5. I find the Volumn number register (is not here).
6. I did the recommended deletion of 'System of Progressive Protection' blogs McAffee and MalwareBytes. Both indicate that the virus has been removed.
7. I tried to create a new account administor and creation and the image with the same error.
I don't know whether or not the error message I see is caused by the virus. However, I'm fairly certain, and is so my Dell rep of tech support, the "drive" appears in the error message does not exist. Anyone know what else I can do to eliminate this error?
Thank you.
,
I came across a solution. It seems that the problem is due to my ignorance. Three years when a particuation my hard drive I have not assigned a drive letter to the "ROCOVERY' player intalled by the OEM. {This "volumn" has ID: \\?\Volume{4abe5988-c73f-11df-8bbd-806e6f6e6963}.
Somehow this volumn developed a file system error. I used disk management to assign a drive letter to this volumn and then, I could check with ChkDsk. He corrected the mistake and now I can make a system image without this error occurring.
Thank you.
-
Help! -HPCP1215 does not print in Windows 7, no error message
Hello, I am running Windows 7 and have a HP CP1215 printer. Until recently, when I start a print job, everything goes as normal EXCEPT nothing comes out of the printer. I get no error message or anything. I get the usual messages, indicating that the print job was sent to the printer, etc. But nothing happens on the end of the printer. I have other printers connected and they print correctly.
I tried:- Uninstall the drivers and software to print several times then reinstalling the drivers directly on the site of HP and the updated software
- I've tried different USB ports.
- I tried to start, stop and restart the printer spool service.
- Tried Microsoft Fixit solution software that detects any problems.
- Tried to restore Windows to an earlier version.
- The diagnosis of HP of the tools on the site of HP (Print & Scan, Assistant physician installation HP Windows 7 printer and HP Diagnostic Tools) none find any questions or problems.
Nothing seems to work, and I am at my wits end and don't know what to do else do a new install of Windows that I really, really want to do.
Help, please!This response from you:
Problem is that when I find the management of printing a back prompt window opens momentarily then shut almost immediately. I tried to access the print management with two different administrator user accounts with the same results.
Is not compatible with this response from you:
I tried the suggestions above without success to be able to print. [Referring to my suggestion to follow the steps described in the help document HP in order to remove the printer driver, whereas this step 3 is "open Print Management."]
My bad. I should have asked earlier what version of Windows 7 you have. Despite contrary information in the help files and besides, print management is apparently not available in Windows 7 Home Premium. See http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/printer-management-problem/62aab3e3-897c-4656-8d1b-58c20bd940fd (I think that Alan Morris).
Then, assuming you have Windows 7 Home Premium, go back to the HP page I linked earlier and instead of using print management, follow the advice of Alan Morris to remove driver and driver--> http://www.vistax64.com/vista-print-fax-scan/278458-how-do-i-remove-printer-drivers-windows-7-without-print-managem.html package
By 'launch' Alan means opens a command prompt window (I would do it in a "computer administrator" account) and type
printui/s/T2 {press Enter} -
32-bit Windows 7 and error message shown on Satellite T series
Assistance needed for this fake computer.
I started to install 64-bit windows 7 then click on Cancel to halfway, after that I realized that maybe this might require too much RAM.
Now get persistent error message (F3-F200-0002). What should I do? (need to explicit instructions as relatively inept)Hello
If I understand correctly, you ' ve started to install windows 7 and then cancelled the installation. Now get persistent error message (F3-F200-0002). Just do a fresh install again. -
Windows Live Mail error message appears in a subpage
I get an error message when I try to move an e-mail message to a subpage and the subpage does not load.
The message in a box, said "X there was a problem sending the command to the program" and when I click on OK, a topic Internet Explorer appears with the 'connection' tab and the rest of the page is blank. The page does not load.Can anyone suggest a solution?
Thank you
ronswoldHi mate
If you search for this error message (there was a problem sending the command to the program) on google page then you will get many visits.
Seems that you are not the only person who gets the error message, but this has nothing to do with your Toshiba laptop with the Windows operating system.In most cases a firewall causes this problem maybe you have installed Zonealarm or something like that
Check this box and remove or disable the settings that could prevent loading software. -
Windows Script Host error message
My laptop is brand new & I got it for two days. This morning I started getting an error message evertime I turn it on or restart my laptop. It reads;
Windows Script Host
Can not find script file "C:/Windows/Temp/VAIO Care Rescue Tool.vbs.
It's really upsetting because my laptop is two days old only & the VAIO Care Rescure is very imporatnt if something happens to my laptop.
Can someone advise me please on how to solve this problem as soon as POSSIBLE.
Maybe you are looking for
-
Function key does not work on Satellite A50-109
The Funtion Key (Fn) does not work on my computerAnd I don't know how to solve this problem It worked once (with all the F1, F2 etc.), but it does not work now PLS HELP ME! Thank youBart
-
Satellite L10-117: the fan stops and only run at full speed
I L10 - 117 with celeron M 370, my fan works for about 2 minutes and stop after only 2-5 minutes, it starts again at full speed. It only works at full speed (made a lot of noise) or stop, I noticed that my friends toshiba satellite fan (also celeronM
-
How can I control the monitor photo height and width with XP?
Having 24 ' ASUS monitor. There are no controls for the height and width of the image. Operating system is Windows XP. How can I change picture height and width?
-
Software for AIO on Mac OSX Mavericks 7210
Hello The software for the new HP Officejet Pro 8600 would be able to manage my old HP Officejet 7210 AIO? When I upgreaded to the MAvericks (of Lion), I can still print but scanning now cannot be done through Capture of IMage and is not as rich in f
-
Hi all I'm working on a Microsoft Virtual Machine, in the middle of a laboratory. (So I don't want to restart the whole machine - tho I'm and restarting all applications on the machine.) the problem: my cursor selects all as my pointer moves on the