Windows backup problem

Similar Questions

• Windows XP Backup problem, cannot find the backup utility

  original title: windows xp backup problem

  I have a system with windows xp, I tried to backup the drive c: to the top, when I click on start, all programs, accessories, System tool, I see how to do anything else but up... i back cant find utility backup click on... then save my c: drive?

  Hello

  I suggest you follow the steps mentioned in the article given below to install windows on the system backup.

  How to install backup from the CD-ROM in Windows XP Home Edition

  http://support.Microsoft.com/kb/302894

  Also, I suggest you return the article mentioned below to learn how to use the backup utility.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

• brand new windows 7 Home premium backup problem

  Hello

  I bought the new HP pavilion DM3 [external dvd player] with the new windows 7 Home premium intalled about 4 weeks ago. After the first round and all updates installed, real I tried windows backup on dvd - r media.

  I started windows backup, after whereas it wonder average wiriteable so I put the dvd - r inside, next step was to format dvd - r [little unusual, but I have no choice]... After succesfull formatting it starts to burn. After a few hours, he was still burning mode 54% without errors and progress too. I pull out the cable of the external dvd burner, the writing process has failed and on dvd was written about 1 cm of layer thickness.

  I tried 2 times again with the same result, but the different progress of burning 56% and 25%

  What should I do?

  Best regards...

  Hello D.A.E.Z.,

  Please check the site for problems with CD/DVD problems.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  There is an automatic FIXIT who might help with your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Backup - will expire when you create a shadow copy

  I had the same problem for a few months, and now it's time to remedy. When you perform the backup of windows, I found the same message every time.

  Create the backup ends at 15% of the shadow copy creation then he said, Windows backup has not completed, the only information I get is it is a "Timed" Out while creating a cliché

  Can anyone help with this please?

  See this Microsoft Knowledge base article:
  + Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and at the time when there are high levels of input / output +.
  http://support.Microsoft.com/kb/826936

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows backup for maintenance, will not perform a full backup.

  Original title: BACKUP WINDOWS FOR MAINTENANCE

  Why don't my backup to a blank disc or an external hard drive?

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         Windows backup that you are using?

  ·         Are you able to perform a backup to internal hard drive?

  ·         Were there any changes made on the computer before the show?

  Follow these methods and check if that helps:

   

  Method 1:

  You can try to clean boot in order to check whether a third-party software is causing a problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  I also suggest to follow the troubleshooting steps form the article and check if that helps.

   

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

• WD external drive is not detected by the Windows backup program

  Original title: with a WD external drive backup program

  I have a WD My Book Essential 320 GB external drive. The Windows backup program does not recognize the drive... The drive IS recognized on my computer and I can access and transfer and copy and paste to it without problem. It's just the backup program which does not. No error message or anything. Only, it does not recognize the drive when I get to the destination area. I tried to update the drivers. The WD support site has Backup downloads for OTHER external drives, but not this one. Their Web site says to contact Microsoft support. Any suggestions?

  Hey mrlray,

  Here's what you can do.

  Perform the clean boot

  Backup process a lot sometimes, this problem is provided by third party in conflict with windows software. See if this is the case here by putting your boot system before you perform the backup.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Ensure that return you the computer to a normal startup mode after you have completed troubleshooting.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to run Windows backup under Vista

  I keep getting error messages when I try to run the Windows backup to an external drive. Aired these backups every month for a while with no problems, but now he keeps by default. An old laptop, so I am running vista.

  First of all, I got this message "error 0x8007045D: the request could not be performed because of an i/o device error." After looking on the suggestion of a forum has been a problem with the external hard drive, so I ran check disk but who gave the fire. At the same time, I tried to open a file on a separate external drive to get a similar error message - seems a little by chance...

  Because the disk check gave the fire I tried to climb back again, to get the message ' the shadow copy creation timed out. " Repeat (0 x 81000101).

  Hoping that someone would have an idea of how to fix this?

  Thank you!

  Try this link suggestions

• Windows backup program does not work properly, can not format blank media.

  Successfully, I formatted the drive using autoplay.  However, when I try to run the backup program on the formatted drive, I get a prompt to format the disc again after a few minutes, I get message that format could not be completed.  Is it possible that the window backup program is corrupted?  If so, how should I do?

  Successfully, I formatted the drive using autoplay.  However, when I try to run the backup program on the formatted drive, I get a prompt to format the disc again after a few minutes, I get message that format could not be completed.  Is it possible that the window backup program is corrupted?  If so, how should I do?

  I had these problems and many others using DVDs to make the backup of files.

  Please save you time sitting in front of the computer, the power to the machine with the DVD and the aggravation of not working do not after all.
  Invest in an external hard drive for backup of files. It is the most effective way.
  These days, a 1 TB external hard drive can be had for less than $100. It's money well spent.

• Failure of Windows backup while trying to read from shadow copy on one of the volumes to back up

  Original title: how to fix the cliché has failed during the backup

  Using Vista Home Premium Svc Pk 2, I get the "cliché failed" and did not finish the backup.  How can I fix it?

  Hello
  1 did you change on your computer before this problem?
  Follow the suggestions and see if it helps.
  Method 1
  You can follow the steps in Windows upward and the startup type of the service Volume shadow on automatic
  (a) click Start .
  (b) in the search box type Services.msc
  (c) make a right click the service and go to Properties.
  (d) select Automatic from the Startup type of the menu drop down.
  (e) click apply and OK.
  (f) restart your computer.

  Note: Once you restart the Volume Shadow Copy service all restore points will be deleted.

  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  You can also run the disk check.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
  Note: You may lose data while Windows tries to repair bad sectors on the hard drive.

  See also:
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Note: The article is also applicable to Vista.

• Cannot run the Windows backup utility, error: "a file already exists (0X800700B7)."

  I have a Lenovo Think Pad with Windows Vista.  When I try to back up the computer, I choose backup and the location of tools accessory system configuration.  Then I run a backup to start and identify a DVD RW as the location of the backup files.  I click to start and a screen pops up saying

  A file exists already (0X800700B7), and at this time it cannot be saved.

  OX800700B7 is not a file name. It is an error code.

  What follows is a response to the same problem. The person who had the problem was using 64-bit. But that makes no difference in this case. Follow th step by step posted by ABC_george and see if that fixes the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-backup-cannot-create-a-file-when-that-file/d91d7785-9a00-4b26-9ae3-ae35b0d9317b

• Windows backup will not accept a new drive after the 2nd backup drive

  Windows Vista Ultimate Edition. Windows backup will not pass make the 2nd drive. Error: insert - % 2 serial number of volume in drive %1 %3.

  (0 x 80070022) . He is the 3rd disc shaped and then gives me this error. This computer broke down twice before after hibernation. Boss will switch to

  Windows 7 and is upset. He leans on Mac.

  Thanks, Terry

  I don't have a solution to your problem of "dvd".
  I have a suggestion:
  Forget to take the backup of files with dvds.
  Buy an external hard drive and use it for backups of files.

  A hard disk of 1 TB post can be had less than $100, to the Canada. The United States will be even less.

  Thanks to the external hard drive for backups of files, you don't have to sit by the computer and feed it with DVD whenever he asks. You can walk away. The computer will do its thing without you.

  A 2 x 4 in box will store all your files. No DVD more formatting. No more marking each dvd. No stacks more DVD.

• I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore...

  Windows Vista 64-bit
  I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!

  Hello

  at the end of my 1st response is a link to the appropriate forum for these questions

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Why Windows backup will not work on a network share?

  I am running Vista Home Premium and have a drive WD MyBookWorld NAS on a MS LAN.  OneCare used to do all my backups, never had any problem, but OneCare is no more.  I also have a NAS Iomega 2 TB hard drive and the problem is exactly the same for that too - XP and 7 can save on it, Vista can not.

  Windows backup works very well for readers SIN of my XP and 7 machines, but both the Vista, those who refuse.  I can drag and drop files from Vista to NAS, it's just the backup center who is the problem.  When I select the NAS drive for the backup on, he asks a user name and password.  My login to the Vista machine id does not work, and the administrator to the NAS password does not work.  The procedure fails with the 0x800706C6 message.  He refuses also backup on XP or 7 machines (with different messages).  He would be the backup on my other machine to Vista, but I do not have spare storage!
  I have read articles countless and tried to turn on/off control of accounts and mapping changes the network drive, without success - the error message, but does not go far.
  There is an industry on the internet trying to sell people PCHA (what is described as a Microsoft product), but I can't find any help on the Microsoft web site.  It is very bad, when the fault is so common.
  Help, please.  What should I do?

  Hello

  Windows Home Premium backup can't backup on a network location.
  So you will need to use an application of part 3. Professional, comprehensive and Enterprise edition
  backup to a network share.

  You can share files and use the 3rd backup XP to do or use Acronis or other
  party utilities.

  I prefer for the most of backup data and prefer to do it in a way that makes it easy to find
  and to restore a file as well as many.

  Replicator - free - excellent backup tool for backing up the data
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  I hope this helps.

• Windows backup was interrupted by a Windows Update.

  Windows backup was interrupted by a Windows Update. The computer turns off and restarted, the backup was reported as being down.  It's on the DVD #42 (I am a photographer with a lot of GBs, it was the first time run the automatic weekly backup, so it's back up everything).

  I started another backup and was instructed to label the backup as #1 drive. My two questions are: is there a way to tell how many records I need until I run a backup. and 2. Is this pick up where the backup failed had stopped or I'm going to need an another 42 DVD?

  Thanks for your help! Lisa

  Vista does not tell you how many records will be necessary - this is not one of its features (but it is a good idea).  You just have to check what you have selected in the backup, total, divided by the size of each disk can hold and come with your best estimate.

  In my opinion, he will leave from the beginning - no choice upward where it was stopped (I don't think it's possible with any version of Vista or any type of backup you choose).  Vista keeps not an account of what is and has not been supported that can be used to pick up where it left off (well, he has a record, but it is not accessible for this purpose) - this is especially true if you already have another backup (although I don't think it would have been possible to resume where you left in any case).  You may need more than another 42 records because he had not done and we don't know how it will be eventually required - we can say that you will need at LEAST an another 42.

  If you use that many discs, may I suggest you get a USB external hard drive and use that instead for your backups - it will be much easier and you won't have to change disks.  They are not that expensive these days-make sure it's big enough to save what you want to back up and give you plenty of extra space because you'll use it quickly upward.

  Sorry if this isn't what you wanted to hear, but the Vista backup program is not the best available and has a lot of limitations and problems (but it's free and it works essentially for to use us it).

  BTW, next time, turn off the automatic updates AND disable your security software before making the next backup.  Turn them back on when the backup is complete.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.