Windows calendar entries lost after system recovery

Similar Questions

• Ultimate steal Office 2007 download lost after system recovery

  I had to do a system restore on my laptop so no longer have Office 2007, but I don't have the product key, the order number and date. Could you please tell me how I can re - download the software?
  I looked similar questions on the forum where you can be redirected to help and support, but was asked to pay £46 for a question?
  Confused.com

  Hi Alinoakes,

  You will need to contact Digital River for this problem because they are the vendor who provides this special offer. Here is a link to their support.

  https://store.digitalriver.com/servlet/ControllerServlet?Action=DisplayHelpPage&env=base&locale=en_US&siteid=msshus

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install Office97pro after system recovery using windows XP. System does not seem to recognize the drive.

  After system recovery cannot reinstall dvd office97pro. It seems that windows XP does not recognize the program on the disk.  Tested the dvd on my computer laptop windows 7, charges fine. Help!

  Hi Fred Chandler,.

  1. What happens when you insert the DVD in the drive?
  2. You receive an error message?
  3. You are able to use the other DVDs on the computer?
  4. Do you have any third-party DVD burning software installed on the computer?

  If you are facing a similar problem with all DVDs on the computer, refer to the article below and then try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you face this problem with the Office 97 DVD then I would suggest that you post your request in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• How can I recover the Photoshop 8 after system recovery? [was: bkupa]

  How can I recover the Photoshop 8 after system recovery

  Reinstall it properly:

  Direct download links for Adobe software

  Mylenium

• Installation of Windows Mail after system recovery

  Hello. I need help to set up Windows Mail after a system recovery. I have Vista Home premium. My ISP is Comcast, so I have a Comcast email address. I did a full backup on an external HD before the resumption. I have not used Windows Mail since Jan. 27. Since then, I've been access my mail on the site Web of Comcast.

  I need to know the correct sequence of steps to set up Windows mail. Is it to drag the contents of the folder from my outside to my computer? Do I need to configure the info from the first acct (pop etc.) before you transfer the contents of the folder? I want all my old mail book and the address in the new configuration. These seem to be backed up on my external.

  Also once I'm set up should I expect to see all letters sent since Jan. 27? I don't mind what happens. I just want to know what to expect.

  Thanks in advance for your help

  First, set up your account in Windows Mail.   If you want messages that you see in Windows Mail to remain available in Comcast web messaging, configure the account to leave messages on the server. When you click send/receive , it will download all of the messages that are stored on your Comcast email server.

  To import your old messages in Windows Mail, press ALT + F , click on import > Messages > Microsoft Windows Mail 7 > Next , find the mail backup folder and follow the instructions.  The old post will go into a folder called folder imported , and you can move it to other records there if you wish.

  By default, Windows Mail saves its messages in C:\Users\\AppData\Local\Microsoft\Windows Mail.  AppData is a hidden, so turn on the display of the hidden files and folders first.

  To import your contacts, copy them to the contacts saved to the new folder.  By default, Windows Vista stores contacts in C:\Users\\Contacts.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Problems installing software hp after system recovery system

  I just replaced the motherboard due to the failure in an hp g60. I tried using the recovery of the system since the partition and the computer reboots after about 20 seconds in the hp software installation process. Then the system recovery screen would jump upward to want to me again the whole process. After 3 times to do, I did a scan of seatools hard disk and it tested ok. Then I thought that maybe there was a file corrupted on the partition, so I ordered the hp recovery discs. I ran these discs today and I got almost 3 quarters thanks to the installation of the hp software when a screen poped and told him to end the windows session and the computer restarted again. When he started upward, poped system recovery window back up and asked me to do it again. I'm looking for any help/suggestions on this subject. Thank you.

  Hello

  This could be the problem as HP recovery disks check for a "tattoo" on the bios to make sure that the operating system is installed on the machine, that it was intended.  One way to confirm this would be to install an OS on a retail disc - even if you don't activate - just to see if this will load ok.

  Best wishes

  DP - K

• can not update xp or IE after system recovery

  I did a system restore on my computer XP 32 bit. I have not checked to see if he had 1 SP installed, but I had a disc for SP 2 and manually installed SP 3.
  I can't install WIndows updates, due to the fact that I need of IE 7 or higher. IE 7 won't install because I guess he needs updates of some sort? How can I solve this problem?

  I tried to install Service Pack 1, but it wouldn't work because I installed SP 3.

  Thank you for your help

  4. after recovery, your office is always show files that were there before the recovery?

  Describe the very next step you take after you have completed the recovery. The files are still there, but some are missing such as 2007 Microsoft Office and other programs, but my documents are still there

  This means that is non-destructive recovery of Compaq and have without doubt both times. I would say that a re - install destructive is in order and follow my previous instructions that were for a clean install. Note that this will destroy the data so if your data is important you must save it first, ideally twice in two separate devices. If you are worried about data loss, I suggest putting in the hands of a professional, but do not expect to take any responsibility for your data. If someone is able, they may not cover all the possibilities (e.g., disk failure) and we your data must be your responsibility.

  In the light of your PC is one that may require the patch from HP/Compaq AMD I have revised my instructions for you below...

  Print what you want from this Web site that you can access on the PC hit after the new installation. After the installation you're using IE6 that this site does not work with!

  Get these downloads (click the link) and have them on a CD or a USB key (ignore warnings from Microsoft gives you need to be an IT pro or using Windows updates in place)

  SP2 (only if your recovery is a "no service pack at all" XP or is a Media Center XP)

  SP3 (only if your recovery is pre - SP3)

  AMD patch (only if your recovery is pre - SP3)

  IE8 (do not leave Microsoft direct you to a later version, IE8 is as good as it gets for XP)

  Make sure you have your antivirus solutions and handy greater security as (CD/download).

  • Back up your data
  • Disconnect from the internet (remove the cable Ethernet or a wireless device?)
  • Disconnect all devices except the screen, keyboard and mouse.
  • Make the new facility (the driver installation should not be necessary for a resumption of Compaq)
  • Remove Norton (use the deletion tool that rocks of XP has suggested)
  • Install SP2 (only if there is no service pack at all after the recovery, or it is XP Media Center)
  • Install the patch from HP/Compaq AMD (if recovery is pre - SP3)
  • Install SP3 (if recovery is pre - SP3)
  • Install IE8
  • Install antivirus/security
  • To connect to the internet
  • Update antivirus/security
  • Windows Update
  • Install remaining desired hardware/software
  • Restore your data

  Do not use Windows updates or driver "detectives" update/install drivers.

  Do not try to use Windows Update, until SP3 is installed.

  Do not install IE8 or any other software as long as you are at SP3.

  Make sure to use restore points in case something goes 'shaped pear.

  Tricky

• Analyze the error "C:\Windows\Panther\unattend.xml" after the recovery attempt (computer laptop gateway)

  I had a problem, which lead to the other. I'll just show what I posted in the other thread. Thus, I have provided the link for reference.

  This is the excerpt from this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/a42818dc-4037-4551-aaa4-bc1330d4203b?prof=required

  "Well, then taking your advice, I found the software to restore the computer to its original state. I save all of his documents and then run the restore process. Should be no problem right?

  NOPE! It installed fine, and now it is stuck in an ANOTHER infinite boot loop! (This laptop must love restart all the time).

  So yes, this is what he does now.

  It starts normally with the typical screen of Vista (the puke green bar fly across the screen). Then it comes up with the screen blue-green pretty fancy, and it says "Please wait while Windows continues to set up your computer...". »

  Right now, it comes up with this box beautiful error "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file. The answer file is invalid. "with the OK" "button. You click on 'OK', it stops and then restarts, shows the same message.

  I tried Googling this error, but nothing of the suite of solutions my situation. Ugh! Of course, I can't get back into windows and simply stop and start the restore process again.

  Ideas? »

  Just so that you know it's a she is a Windows Vista Home Premium 64 - bit SP1 OEMAct gateway.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml

  Above is how the gateway recovery is supposed to work.

  Also, try this:

  Try using a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the gateway > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  To exclude software as the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• RESULTS OF THE PRINTER ARE NOT READABLE AFTER SYSTEM RECOVERY

  HP Pavilion p6740f desktop computer. Windows 7 Home Premium 64-bit.

  PhotoSmart HP 6510

  After a system recovery recent everything works, except the printer does print to look like giberash.  Here's a sample:

  HN #$ () (1 + 29LYI

  Although the documents look good on the monitor, they print it.  It doesn't matter if the document is on Wordpad, Notepad, Word or PDF.

  Please tell me what is the problem, Joe

  I just use a program called REIMAGE to repair the files.  It worked very well, found the bad files and delete them and replaced the files with the new ones.  The printer works fine now.  REIMAGE is a great program!

• Relocation of the PS CC trial after system recovery

  I have installed PS CC trial December 21, 2013. After a recovery system PS disappeared. I find no way to reinstall it at the time of the open trial.

  Run creative cloud cleaning tool , and reinstall.

  Mylenium

• where can I find the original trunk after system recovery

  I made a recvry of the system. I need to add the boot in the file.i start looked in c for the boot drive. I found it c/boot. so I added it to the to the the file start and rebooted. is that correct?

  also, I want theoriginal BIOS F.1B for MY LAPTOP - HP PAVILION DV7 - LM726AV.  WHERE TO FIND IT?

  THX.  KRIS.

  May depend on exactly what you mean by the system recovery

  I don't know what you're trying to achieve with 'boot' or what exactly you mean

  You can find drivers for your laptop from HP support specific to your model, you should be aware that bad update/modify the Bios can cause a dead PC

  BIOS F.1B is the bios updated the original was F.13

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5112006#N1749

• Cannot find my cd/dvd drive in windows Vista after system recovery

  I tried all the everything in this forum that I found, but I still can't my dvd player to show up anywhere there was here a few days and I had to perform a full recovery of the system and now its does not can someone please give me some ideas so I can use my dvd again drive?

  I have more upper and lower filters

  I am running sp2 and fixit program isn't helping me

  I have a HP Pavilion 9700US

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ----------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Extremely slow/unnecessary Windows Update after system recovery.

  Hello

  While trying to help a friend with her laptop, I encountered a small problem, which seems quite unique. After searching the ' net and the Knowledge Base, I'm about as clued in as when I started, that is to say not very.

  Machine: Satellite 1800 412 (Danish).

  DID: Restore the system to zero back to XP SP1a (NSP).

  Problem: After a complete system via the original recovery CD restore, Windows Update is running * extremely * slowly, or not at all, once it gets to the point where it scans for updates you need. So far, I've managed to get 1 downloaded an update, a little. As an update is attempted usage of the processor reaches a maximum at 100% and stay there until I abandon and hard restarts, since the machine is now almost useless and lazy point appear frozen.

  Tried to: applied manually different updates downloaded directly from Microsoft, such as Internet Explorer 6 sp1, XP SP2 (DK), various updates and patches for XP downloaded and checked/tried to reinstall the drivers of Toshiba (they are updated). Verify that the systems boots properly with all recognized devices. Check the system clock. Searched the Toshiba KB, searched the Internet, searched the Toshiba support forum. Pulls hair in desperation. I have to have restored the system 4times intant to try different ways of patching the system with updates.

  Special features: It is apparently * only * updated Windows, what causes this problem, and that after the first few, where he updates the Windows Update engine in Internet Explorer. Before that I'm trying to update the machine apparently functioning normally. I can surf, download, install and run programs and what not. (No, I did not visit suspicious websites.) If Windows Update runs automatically in the background / 'in the status bar', the same thing is happening: Machine suddenly becomes useless and stays that way.

  The machine is on a local network behind one bulletproof OpenBSD firewall, no other Windows machines inside, so there is no chance of a quick infection of the network at the origin of the problem.

  Unfortunately: Manually download and apply the patches aren't an option I want to activate the automatic updates before you return the machine back to its owner.

  Hope some of you might have an answer to this one, because I have never known or heard of something similar before.

  Frank.

  Hello

  There may be a possible for your problem. An attempt is an Installation from CD XP Win and New Installation of the tool of Toshiba s. check that the activity of process is that s OK, made a driver update and an update of the Bios on the side download Toshiba. http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  I hope this is a help to your problem.

  By

• Satellite L550 - 13 c - can't configure Windows after system recovery

  After using the windows recovery discs, I get the message,
  + Can not configure windows to run on this computer hardware. +

  I changed the hard drive in the past, and after that reinstalled the software with the same disk without problem. But now it does not.

  Any advice?

  Best regards, HAns

  Have you used the new HARD drive with the same size?

  Probably the image of Toshiba is unable to configure the system due to the size of the HARD drive.
  But to be honest: the size of the HARD drive should not be a problem and so it's just a guess

  However, the fact is that the Toshiba Recovery disk would fix the laptop back to factory settings. This means that even the new HARD disk should be partitioned and the same partitions can be created on the new HARD drive.

  You could overcome this procedure using a Microsoft Windows installation disc.
  Of course the Toshiba drivers must be downloaded separately from the Toshiba page and installed after the installation of the Windows System.

• How to restore a significant update to Windows 7 I lost after a restart for an earlier version of the system restore point?

  I am running Windows 7 64-bit Service Pack 1 on a desktop HP Pavilion Elite HPE-350 t. Recently, a malfunction of Windows at startup caused my father reboot the system to a previous system restore point. (He says it was one of several options at startup.) Everything seems to work fine now except that I seem to have lost a critical update Windows downloaded after the restore point, Windows Update Agent 7.6.7600.256. Still, there are in my Windows update history and is listed as "installed successfully", but when I check my updates installed, it is absent. Also, when I try to search for updates installed, I get a message indicating that Windows is up-to-date. I can't uninstall the update and re - install because it is missing from my list of installed updates. So I guess that the re-start to a previous system restore point has put this important WIndows update in limbo. How can ensure me that this update is installed correctly and working properly?

  Hello hakimbenzakis,

  Absolutely, because based on that you are running the latest version of the Windows Update Agent and have the last update to it.