RESULTS OF THE PRINTER ARE NOT READABLE AFTER SYSTEM RECOVERY

Similar Questions

• all the Manager are not open after clone r12.1

  Hi expert,

  I have clone of database on a new server from prod. database is in place, the application is in place for the backend. When demand de./adstrtall.sh all services are normally don't start no error/warning back. but when I check the Manager

  ps - ef | grep FNDLIBR

  He returned only 5 lines that show all the Manager are not started. and one thing more when I access the PC customer request the application is not open.

  Please suggest me what I can do to check any type of error.

  I check all the quick logfile clone basic data and application but not found any type of error.

  AutoConfig successfully completed level database and application.

  OS - rhel 5.7 (test server)

  EBS r12.1

  OS - rhel 5.3 (prod server)

  Thanks and greetings

  pritesh Rodriguez

  the question is sloved by the following steps.

  1. in my case, the firewall is turned on then I m unable to access ebs application in the browser. so turn off the firewall on the server.

  2. in the-> simultaneous set I check every manager and change the host name of the server test (instead of host name of server prod). After eating this all is implemented successfully and works very well...

  Thank you & best regards

  pritesh Rodriguez

• Cannot print, images are not readable after the automatic updates.

  Original title 'Vista update'

  Last night my Vista has received an automatic update.  Now I can't print, and the image on my monitor is barely readable.  Thank you.  Now what?

  Hello

  1. the updates were installed and were the updates installed successfully?

  2. what exactly happens when you try to print?

  3. you receive an error message when you try to print?

  4. What is the serial number and model of the printer?

  5. are you faced with images of the computer is not not readable?

  Please provide more information on the issue so that we can better help you.

  In the meantime try the steps below and see if they help.

  Step 1:

  I suggest you check the Windows Update history for more information about the updates have been installed and if they have been installed successfully.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  For the problem with the printer, you can run the fix it or follow the manual procedure provided in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• If the Photos are not Visible after their exportation from Photos for Mac

  Export of Photos may write JPGs invisible on the disc, if the photos are exported with the option ' file name: use the title.

  If the first affected user a title to the picture, the deleted the title text, photography will have an empty title and the exported photos will be simply named ".jpg" and treated as invisible system files.  This bug can fill the disk with lots of image files, which are not visible in the Finder, unless the hidden files are made visible.

  User bikedaveca reported this bug today:

  See discussion: exported photos do not appear in the Finder

  More in this tip of the user:

  Bug: export of Images with "file name: U title" exports the files as Invisible, if the title has been deleted

  As a precaution, keep at least one printable character in the title field, when when you remove a title from a photo, so you can see, she had a given title.

  As a test, import three new pictures, for example:

  

  The first has a title, the other had a title, but removed, the third one never had a title and watch "Untitled."

  When I select and export them with ' file name: use Title ", only two photos will be displayed in the Finder.

  The problem is, that deleting a title does not remove the title, but adds an empty title. If the photos are exported with the filename ".jpg".

  

• The contents of the folder are not displayed after upgrade

  When you click to open more folders of bookmarks toolbar to not display all bookmarks. Instead, they display a small square under the left side of the folder name. On one that opens subfolders under him displayed the same square. Its as if they tried to open but could not draw the menu. Bookmarks are available and display pages if I choose to open in a tab when right-clicking, but they cannot be seen otherwise. I have the following extensions that are not currently enabled: Adblock Plus, Adblock more pop - up, download status bar, download helper, Leet Key, IP Norton, Norton Toolbar, password exporter, personas. All have been updated to the latest version. I have Image zoom which is activated. IO have several additional plugins that are not enabled. Please let me know if they are needed.

  Do you use a character (Tools > Modules > themes)?

  See also http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

• Please help, the printer does not have 'ink system failure '.

  Hello

  Any help appreciated.  My printer is printer all-in-one Photosmart C7280.

  2 days ago my printer has not worked. It comes with several error messages after I turn it on. The first is "ink system failure: ink system has failed." Cannot copy, receive faxes or print. Refer to the printer documentation. Error: 0xc19a0025. Turn off the power, then new. »

  However when I turn off and then again via the "power" button, I get a message saying "abnormal termination. Then the same error message original returns (0xc19a0025). It is the most common error and won't go away. Then too, I get a message saying "problem Photo tray: lift the output tray, check the photo tray is pushed up to the stop, lower output tray. Despite the fact that I haven't used the photo tray in several months and it is in the correct position.

  So far I tried to turn on the printer, shut down several times by using the power button. Also, I turned off the printer in making last night (after having been closed properly) and back on this morning. I looked through the documentation of the printer, but could not find tips for troubleshooting for this kind of problem. I updated the driver from HP using software update on my mac, and the problem is still there.

  Now I get desperate, I rely on my printer/scanner/copier a lot!

  Thank you

  Nathalie

  This widget could not be displayed.

• When I try to distort large layers the area becomes is full of lines and symbols (and the layer I'm deformation is no longer visible) OR the lines move without the layer move at all.  In both cases, the results of the movements are visible only after

  When I try to distort large layers the area becomes is full of lines and symbols (and the layer I'm deformation is no longer visible) OR the lines move without the layer move at all.  In both cases, the results of movements are seen that when you hit enter.  Images and layers are big enough.  fight 1 GB.  I have a lot of memory and using 4 GB or RAM. on mac.  Any ideas how to fix?

  Thank you

  Could you please post screenshots to illustrate the problem?

  Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

• The contacts are not loading after OS updated to Version 6.0 of Marshmallow

  Hi all

  I use Note K4. I've updated the Version of the OS to Version 6.0. After updating the Version of the OS the soft Contacts does not work. It lists progressdialog for longer and longer. It loads evertime. But no contacts appear. Also, I am trying to import the Contacts. He does not appear.

  Please help me. Thanks in advance!

  go to settings/applications/Manager contacts and force to close.

  also erase the data of the user (Makke you have the copy backup)

  Also, re - install your whatsapp (not a joke. Has worked for the users of manu with the same question)

  Open contacts... Click on the 3 points and chose "contacts to display.

  The select 'Phone' only.

  Also select 'display only the contacts with number '.

• computer does not start after system recovery

  Hello, I so got a bad virus on my laptop acer ms2253 so I reinstalled the operating system using the recovery partition. but now it turns on, only the battery indicator flashes. I reseed memory live, hard disk and dvd player and it won't always turn. I have also taken the battery and tried to turn it on, all nothing happens.

  Hello, I so got a bad virus on my laptop acer ms2253 so I reinstalled the operating system using the recovery partition. but now it turns on, only the battery indicator flashes. I reseed memory live, hard disk and dvd player and it won't always turn. I have also taken the battery and tried to turn it on, all nothing happens.

  Hey fluffytuzki

  If you experience any problems during or after the use of the acer recovery partition, you will need to contact acer directly

  It's their recovery process not microsofts

  http://support.Acer.com/us/en/default.aspx

  Walter, the time zone traveller

• S12 Bluetooth not working after system recovery

  Hey guys!

  I'm in a bit of trouble. After I did the OneKey Recovery on my S12 (Ion + Win7) the internal Bluetooth device no longer appears in system devices. I tried to reinstall/repair the existing driver for the stack, but it does not work.  During the process of installing windows failure appears and says: "no Bluetooth device was detected. Please make sure, that your device is connected correctly in order to continue.

  Any suggestion how to get the operation of bluetooth device?

  Hello and welcome...

  you push on the right side of the S12 Wireless Switch on Off
  

  FN + F5 Petite separate soft switching
  

  S12 BT Windows 7 Configuration / driver download extract...

  After installing BT... Click on the BT network on the desktop click on install any device driver

  cordially KalvinKlein

  -------------------------------------------------------------------------------------------------------

  You want more? For more information to get the most out of your machine S-Class

  Establishment of Lenovo

  Backup

  Windows 7

  Clean install of XP

  Starting XP

  Guide to WebCam

  Lenovo easy Capture

• The mouse settings not saved after reboot/restart

  I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

  Mr. Brian,

  Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  1. click on the Start ORB, type msconfig in the Search box and hit Enter
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
    2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
  4. click OK and restart your computer
  5. after reboot, change the speed of your mouse pointer and restart

  This should solve your problem.  Please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photoes printed are not equal to calibrated screen

  I have Photoshop CS3, calibrated screen (with x-rite eye - one display 2) all-in-one printer HP Photosmart 7283. The prints are not the same colors on my screen. How to solve this problem?

  I see that the i1 offers a luminance target setting. Not only that, he has a prior calibration function that allows to use the OSD of the monitor controls to get as close as possible to the target before the calibration. It is the best way to do it.

  Read the manual (you need to be in advanced mode). Then go to a target of 100-110 cd/m².

  Fact.

  Then go to the dialog box print in Photoshop. Under color management, click on 'Document '. It should say Adobe RGB.

  Choose "Photoshop manages color".

  Then, under "Profile of the printer" see if there is a that corresponds to the printer and the paper you are using. If not, this means that HP provides no profiles for this printer. In this case, you must use "Printer manages color" and the foregoing is questionable.

  If there is, take it, and then click 'Print settings' to take you to the printer driver. Here, clear color printer (ICM off or similar) management. Again choose the correct paper type so that the printer use the right amount of ink.

  That's all there is. I repeat myself just from this point. Basically, I said all this in the first post in the PS Windows forum.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.