Windows cannot remove your computer from homegroup

Similar Questions

• "Windows could not remove your computer from homegroup."

  I have a laptop and a desktop computer which have been the two participaing in a homegroup.  It no longer works, so I tried to "leave the homegroup" of these two machines, who intend to recreate.  Furthermore, standard networking and file sharing is always present.  The Bureau has allowed me to leave the homegroup, but I get the message "Windows could not remove your homegroup computer" on the laptop.  I ran several times the convenience of network with homegroup on both machines.  I also did some research and tried everything I could find on the web, without success.  Please tell me how can I reset the settings of homegroup on my laptop. Mark S. Freeman

  Here's a solution that might work.  It worked for me.

  "Studied the issue and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OHS. "

  Solution given by Streetwolf on the Windows 7 Forums

  Link is below:

  http://www.SevenForums.com/network-sharing/29060-cant-start-peer-name-resolution-protocol.html

• Windows cannot remove your homegroup computer form

  Hi all! I had difficulties to remove the computer from my dad in my old network homegroup. However it is stated below:

  

  Someone please help.

  Hi Christophe,

  I understand that you cannot remove a computer from the home group.

  This power is produced if a file has been corrupted and remove it got the operation of the PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OHS. "

  I suggest check the link and check how can I remove a computer from a homegroup.

  Homegroup: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Leave a homegroup

  
  http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

  Hope that helps you remove the computer from the home group. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows cannot reset your computer

  My computer says windows cannot reset your computer... Please help me to reset my computer...

  The original product key is embedded in the motherboard of the laptop UEFI firmware, so you're not going to lose...

  If you restore using recovery media HP, which will retrieve the key automatically and reactivate the original OS.

  However, you have already saved your PC running Win10 with Microsoft. So, if you decide to install Win10 instead, as long as you install the same version you already running, once the PC connects to the Internet, it will communicate with the Activation of MS servers and automatically reactivates.

  Good luck

• How to remove a computer from my working group under XP and Windows 7?

  We have recently implemented a network composed of our three computers (2 XP) Home Office and 1 Windows 7 to share files and printers.

  However, we found its malfunction and could not share what we expect.  One of the reasons, we can see it, could be one of the computers have been infected.

  So, we try to remove this computer from the working group.

  However, no matter how hard I searched on Internet, there is no way to remove the infected computer's existing working group.

  There that experts can help us?

  Thank you very much!

  Hello

  You cannot remove a computer from a working group, but you can change the name of the working group.

  http://support.Microsoft.com/kb/295017

  http://www.SevenForums.com/tutorials/51711-workgroup-name-view-change.html

  But that will not necessarily mean that they are not accessible by other computers on the network, or it will necessarily make the other less likely to be infected through this PC computers.

  The only way to "withdrawal" of a computer on a network is to unplug the network cable or remove the name of the wireless network.

  If you are concerned about a possible infection, you must get the malware to day and scan for malware protection.

  However, I suspect it's more likley your problems are caused by the lack of knowledge in the topic network different Windows operating system. This can help...

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  If you are having specific problems post back with details and someone will almost certainly try to help.

  Tricky

• cannot open a session - tried to remove the computer from a domain

  XP pro SP3-

  My computer was an area where I logged on using a card chip.  I remove the computer from the domain and use it at home.  In the network dialog box, I changed from one domain to a home network and restarted by fashion.  Now, it's starting to use CTRL-ALT-DELETE, then a username and password that I did not and I do not have the opportunity to specify a field or use the smart card.  Blanks do not work.

  I want to undo what I've done and join the field, I can use the smart card and unlock the computer.  Any ideas how I can do this?  I can not use safe mode or get to the command prompt.

  Thanks JW

  I went hat in hand for people to support admin area and after going through a long list of their combinations of name/pw super secret they have finally found one that worked and were able to reconnect to the field.

  I intend to set up a new user with local newspaper on but all first I have to work around security policies when they me reconnected to the field.  I plan to permanently remove this computer from their LAN, who has started all this in the first place.  Pain in the neck for policy all number, disables USB (kill all external drives, including the optics I) etc.  I can fix it everything that it (still) was not aware of this bump on the road when I tried to switch on my home network.

• Windows cannot install your printer driver and / or utility

  I have an Epson SX200 printer all-in-one and I am trying to install the device on a Vista 32 Dell laptop.  I don't have the disk for the printer, so I try to download the drivers for the printer on the epson site.

  I downloaded the drivers scanner and software sucsessfully, trying to download the point of finishing extracing printer driver files, I get an error message saying "Windows cannot install your printer driver and / or public services."

  I tried the support of epson who tried intsalling the pilot from other web sources, bottom of dissabling starting programs, etc.

  I searched the web but cannot find any patches or explanation to the problem...

  Any ideas?

  Hi J Bielawski,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Check whether the problem is resolved.

  Method 2:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Windows cannot repair this computer automatically

  Original title "Help? Laptop used to start.
  My laptop was working fine and then I went to turn it on and it keeps trying to windows startup repair and then says "windows cannot repair this computer automatically" if I click on problem it details reads as follows: StartupRepair V2

  AutoFailover

  CorruptFile, etc..

  It shows a ton of different ' problem signatures and a group of numbers too?  He repeated also unplug all devices recently attached to calculate as a camera or portable music player?  Don't attach something like that again?

  Any ideas what would cause this and how or if I can fix it?  IM wondering if my teenagers attached ipod or iphone and done something stupid?  Help?

  Hello

  1 did you do changes on the computer before the show?
  2. What is the brand and model of the laptop?

  Method 1:
  You can start the computer in safe mode and check if you are able to start
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  You can also perform a clean boot and check:
  http://support.Microsoft.com/kb/929135
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
  

  Method 3:
  If you are able to boot into safe mode perform control and restoration of the system:

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  You can consult the links for:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 4:
  Alternatively, you can run using the Windows Vista DVD startup repair.
  You can check the links:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Click on the link below:
  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• error message "Windows cannot remove the password. "Password policy or account require the account has a password.

  original title: remove administrator account or remove password

  I am trying to remove a user administrator account or remove the password and I get the error message below. Also, I can't delete the password as an administrator in Windows 7 32 bit or delete the account. I get this error message "Windows cannot remove the password. "Password policy or account require the account has a password. I tried to create another admin account, but it does however not take away the password or delete the account else

  Someone has put a policy on your machine to enforce some rules for passwords. Best is to ask that person to change these rules for you. Alternatively, you can run gpedit.msc, then follow this path to edit yourself: Local computer policy / Computer Configuration / Windows settings / security settings / account policy / password policy.

  Note also that:
  -You cannot delete the built-in Administrator account.
  -Administrator with a blank password accounts is a big security risk.

• "Windows cannot repair this computer automatically" - Satellite C660-108

  Got a new laptop for Christmas yesterday and it worked fine yesterday, I came home tonight and he asked me to click on restore and then restart. I realized that, now, whenever I go to turn on the machine, it brings the message "Windows cannot repair this computer automatically" and a saying to have connected external devices to and remove, then (which I don't have)...

  Was called "The Tech Guys" they said it was probably because when I started the laptop arrived so many updates etc and one of them went bad and I need to call back with the front desk and they'll go through it with me.
  So I intend to do, but I would like it if people could give advice on how to solve this problem.
  Thanks :)

  In my view, ting best that you can do now is to reinstall the OS using the recovery disk.
  After the own pre-installed operating system it will be working correctly again.

  How to do this you can read in the document or as a result of this document - s user manual http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  If you have any other questions you are welcome.

• How can I remove my computer from vGrabber and back on Google Chrome?

  A friend sent me a video that requires the vGrabber download to see. Now, I can't get rid of vGrabber. Incidentally, immediately after the vGrabber download my browser from Google Chrome for Internet Explorer and I can't change it back. How can I remove my computer from vGrabber and back on Google Chrome?

  In fact, I'd rather Google Google Chrome. I use XP Home Edition

  original title: lose vGrabber

  Hi MRI,
  You have a question? It's the poster of the question to the United Nations mark the answer, so the community can see it didn't work and continue to provide answers. If you encounter a problem, please start your own question with all your information so that the community can better help you.
  Eddie B.

• Windows cannot repair this computer automatically (Vista) after changing the motherboard

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  Clarification:
  Windows Vista is preinstalled on this system?
   
  If I read (and cited only) correctly - Yes, which is not going to work.  The license for Windows Vista was related to the Compaq system motherboard.  If you had that repaired under warranty, HP? Compaq could have helped you.  As you have created a new machine (motherboard especially) now, you will need to purchase a new license for Windows Vista or any other operating system of your choice.
   
  You could, I suppose, buy the OEM of Windows 8 version.  You will have the same problem later (OEM licenses is related to the first motherboard it is installed and activated with.)

• Cannot install SP1 - repair service cannot start your computer

  original title: try to install Norton 2012

  I can't install Norton 2012. It says I need service pack 1, when configuring her repair service cannot start your computer and then installs nothing

  Microsoft Windows Vista® (32-bit and 64-bit) Starter/Edition family Basique/Familiale Premium/Professional/Ultimate Edition with Service Pack 1 or later is the minimum requirement to install Norton 2012.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• Windows cannot discover any computer or device

  Hello

  I am to evaluate Windows Server 2012.

  I've set up a small network size, with a server (Windows server 2012), a switch and a workstation (Windows 7). I set up a domain.

  In my computer (Windows 7), when I try in "Network and sharing Center" feature run the "see the whole map" I get: "Windows cannot discover any computer or device.

  Reboot in 'safe mode with network', and repeting the operation fails the same, but with a different message: "Windows cannot start mapping on the adapter. Please make sure that the adapter is connected and active.

  I checked the card through "Control Panel\All Control Panel Items\Troubleshooting\Network and Internet". Result: "Troubleshooting couldn't identify the problem.

  The State of the map is:

  IPv4 connectivity: Internet
  IPv6 connectivity: No network access
  Media state: enabled

  The adapter is a "Atheros AR8151 PCI - E Gigabit Ethernet Controller (NDIS 6.20)", and the motherboard is recent (a Gigabyte GA-Z77X-D3H).

  In addition, I ping the Windows Server 2012 of the Windows 7 workstation and vice versa. Remote Desktop connection works too well.

  "Network control and Internet\Network and sharing sharing settings Center\Advanced" the Windows 7 workstation, I duly turned on "network discovery.

  Also, I have disabled the windows firewall for both machines, without result.

  What can I try something else? What could be?

  Thank you

  Varus

  Hi VarusGermanicus,

  For assistance on this issue, you can post your question in the Technet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads