Windows cannot start

Similar Questions

• CD/DVGW SN - S082D question - Windows cannot start this hardware device Code 19

  I've had my laptop for a little over a year now and it's had its fair share of problems, which most is repairable or there is a solution.
  Earlier today, I inserted a disc in the drive and tried it opens, went into "My Computer" and find the disk was not displayed.

  It's happened a couple times and a simple reboot fixes the problem.
  I rebooted twice and this time, that the problem was not fixed, after going in 'Device Manager', I found there was a problem with the device and he gave me the following error message

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  As usual "search for the solutions" is useless and doesn't return any results.
  Thanks in advance for any response.

  Some info that may help
  OS: Windows Vista editions Home Premium
  Laptop model / number: Medion MD 98300
  DVD drive: TSSTCorp CD/DVD W SN-S082D ATA Device

  Thank you

  First of all, I wonder why you post this here in the Toshiba forum if you don t have a Toshiba laptop
  It's a little strange for me... anyway I'll try to help you.

  It seems that the registry keys are corrupt and so your CD/DVD drive does not work properly.

  Just try the proposed solution mentioned here in the doc of Microsoft:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• Satellite M30: Windows cannot start because a file is missing

  Error message: Windows cannot start because a file is missing.
  \Windows\system32\config\system

  You can repair from ordinary cd and use "r" for repair.

  How to use recovery cd for this... It does not work.

  Hello

  It's not easy to use the repair mode because the recovery image file CD. The other way is that you try to start the operating system is the safe mode and look if the lack of files exist in the C:\I386 folder. If not, well I think that the only way is to recover the system with the recovery CD.

  Good bye

• A satellite starts no-Windows cannot start

  I had an update for windows internet explorer, but he has never started to download and I couldn't close the download window.
  Then my phone froze so I turned off and tried to restart.

  It comes up with all kinds of options but not work they freeze or at the end, reboot the laptop, and then he says: windows cannot start and it does a check but it stil does not work.

  Please help its days only 20 years.

  Hello

  You can try to start your computer in SafeMode (F8) and start the laptop computer use option systemrestore and restore the operating system time earlier before do you this update.
  Maybe this will help.

  If this isn't the case, I advise you to install the new OS by using recovery image. If you have any new laptop you can do this using the F8 option to fix my computer.

  If you need more help how to do it please let us know.

• I reformatted my T520 with the recovery disk, but Windows cannot start

  I reformatted my T520 with my recovery disk. When the computer restarts, it says that Windows cannot start properly. Help, please.

  I finally solved the problem; Here is my solution:

  I have determined that the backup image has been bad, and this is perhaps why the recovery disks have been as bad. I tried to use both to reformat the C:\drive several times without success. Fortunately, I had a Windows 7 disc from another computer that I no longer use. However, the T520 would not be updated to Windows 7 using this disk, so I run Diskpart to reformat all (this removes everything, including the image.) Then, I was able to reinstall Windows 7.

  With this new facility, would not any responsible drivers, including LAN and wireless drivers. I went on the Lenovo Web site: http://support.lenovo.com/en_US/downloads/default.page?selector=expand to download the driver for "Intel Wireless LAN (11abgn, abg, bg). This provided wireless access to the computer. (Downloaded the driver on another computer, saved on a USB stick to transfer to the T520.) Restarted the computer in case where. Then, I went to http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE to download ThinkVantage System Update 5.0. After you have installed this software and reboot, all the necessary drivers would be so loaded.

  Unfortunately, if you don't have any Windows disk, you will need to pay 50 dollars to get one from Lenovo. Lesson learned? Next time I buy a new computer, the first thing I would do is to reformat and reload the computer by using the image while still under warranty. I did several times with my other Lenovo laptops without fail. I have to do this once every 3 years each time my computer seems to slow down. This is the first time, it didn't work.

  I hope this help anyone who is in the same situation.

  (Boy, I have miss the good old days when I could fix everything from the DOS command prompt.)

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• mouse works does not, his hang.its showing me the error like this. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).

  I recently installed a graphics card for GTA 4, his work properly.bt yesterday my screen crashed it mean clear.when I started in safe mode then it is appeared correct.afterwords all of a sudden my mouse kick & stopped then I uninstalled graphic card.cause of this my connection net failed.plz help me & give me good solution.i have window xp.

  Hi DineshKaria,
  
  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
   
  Follow the suggestion in the article given below for code 19 and check if the problem is resolved.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
  Additional reference on:
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

• DVD/CD Rom error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title: CD-ROM/DVD-Rom problems

  My CD-ROM/DVD-Rom drive does not work when I check the system, I get the following message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). "How to solve this problem?  Thank you in advance.

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  My DVD/RW drive stopped responding on my Acer Aspire laptop computer 4510Z I checked the Device Manager which is gives the following error message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I solve this error so far achieved the following without success:

  -Checked for solutions using the button below the error message
  -Scanned for hardware changes
  -Used Microsoft Automated Troubleshooting Service (SMAT)
  -Created the cdfix.reg file, it has added to the registry and restarted the computer

  I would be so gratefull for any help anyone can offer.

  Darylandgoats

  Hello

  I oddly found the solution to my problem while browsing through the suggestions of SpritX at the following link: http://forums.techarena.in/vista-help/771598.htm

  Here is the solution I implemented and now my drive works perfectly:

  RESOLUTION
  Warning serious problems might occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps: 1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.
  Note When you delete the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  For information about how to contact computer software vendors, click the number in the following list to view the article in the Microsoft Knowledge Base:
  65416 (http://support.microsoft.com/kb/65416/) hardware and software contact information, A - K

  60781 (http://support.microsoft.com/kb/60781/) hardware and software details, L.-P.

  60782 (http://support.microsoft.com/kb/60782/) hardware and software contact information, Q - Z

  Thank you!

• Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  My DVD RW drive, Optiarc AD7530B has stopped working. I get this error message in Device Manager:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Verification of the solution does not anywhere - thanks Microsoft!

  Anyone know if there is a resolution to this?  The car was working fine so it must be one of these "Windows Updates" which does its magic.

  Hello

  Check these for the good info on CD/DVD - maybe someone with the same unit can give you all the
  correct the registry settings to try. And the drive could be bad.

  CD/DVD units
  http://www.myce.com/storage/

  Forums - a lot of expert real help
  http://Club.myce.com/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• Windows cannot start this hardware (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Tried to uninstall the device, and then add the device to the rear, so far without success.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows cannot start the firewall service.

  Original title: my firewall stopped working and it won't let me turn it back on.

  My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

  Hey, bed,.

  File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

  Information available at:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service

  Windows cannot start the Diagnostic Policy on Local Computer Service?

  Original title: error 1079

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community.

  From your post, it seems you are getting and error 1079.

  The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.

  What service are you trying to start?

  We will follow the steps in this link and check if this solves the problem.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  Thanks for posting the result and let us know if you need help on Windows.

• Error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title:

  Windows 7 no sound at all

  Hello

  I would like to ask help for Win 7 problem 'No audio '.

  I have a Win 7 64-bit Professional desktop PC. It has a motherboard Asus P5Q - EM.
  Previously, everything worked very well over a year, but now there is no sound at all. I see a little red x in addition to the speacer icon.

  I got a craphics card problem and it has been replaced, and shortly after, I didn't notice that no audio problem.

  First of all, I tried to fix the external audio card drivers - no help. Then I thought to use the motherboard
  audio only and removed the external audio card. I have cheked Bios that there is audio compatible motherboard.
  Windows Manager device shows Audio Realtek High Definetion. (Once I reinstalled externally
  audio card, but did not get it to work and I deleted again and focused on getting the Audio motherboard
  work.)

  Through the Device Manager, I uninstalled the device Audio from Realtek motherboard and all other audio related devices and start the PC.
  After you start Windows 7 detects audio devices well and tries to install the drivers but still said the driver installation failed.

  I also used the troubleshooter in Windows 7. According to the material and audio, I clicked on the audio playback troubleshooting. The system has tried to install the drivers, but all have failed in similar way as after rebootig.

  When I go to see the Audio the Realtek High Defenetion properties, it says:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I downloaded the latest drivers (some 54 Mb file called: 64bit_Vista_Win7_R267) Realtek www-site and run it, but no help. Same problem - no sound at all.

  If I run application system information and go to the "components" > "Problem Devices", it is said Realtek High Definition Audio, error code: failure using the VxD loader. It is also noted on the VAN Miniport (IKEv2), error code: this device does not work properly because Windows cannot load the drivers required for this device.

  I also unplug the beam of the motherboard front audio jack. I thought it may create a connector related issues, but he did not make a difference.

  If I ask the system to update the driver using Device Manager, it says that the piloted is up-to-date.

  I checked the details Realteck Sound Device in the Device Manager and it says under the number "Problem code" 13.

  Also other devices under device 'Video controls and sound game' managers do not work. I uninstalled all the. After reboot Windows 7 detects all the. Win 7 tries to install the drivers, but always fails and yellow! singing appears next to all devices.

  Under the NIC in Device Manager there is another device with the yellow! sign as well. The WAN Miniport (IKE v2). I don't know if it has something to do with this audio problem? Win 7 detects it as well after uninstalling and tries to install drivers after the start, but is also always fails.

  Now, I'm confused and I don't know if the problem is really in the Windows registry database? What is error code 13 of Realtek Audio device and what is actually the VxD loader problem?

  I'm completely lost on how to proceed with this problem.

  Can someone give advice on how to continue with this question...

  Tomppa

  I plugged the the hardware id in the Microsoft Update Catalog and the device is identified as a C-Media CMI8738/C3DX PCI Audio Device but there only Windows 2000/XP drivers available through Windows Update (you need to install the ActiveX control to view and download the drivers):

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=PCI%5CVEN_13F6%26DEV_0111%26SUBSYS_011113F6%26REV_10

  Connect the hardware id PCIDatabase provides a link to C-Media (one-third to the bottom - device ID 0 x 0111):

  http://www.PCIDatabase.com/vendor_details.php?id=376

  However there are a of the drivers mentioned in the following link that can run, and I suggest to try:

  http://www.SevenForums.com/sound-audio/9824-c-media-Freezy-my-PC.html

  The driver is the "Striker 7.1 pilot" (striker81742.zip) in the following link:

  http://www.htomega.com/downloads.html

  An in these drivers .inf file has an id of material corresponding to your device.

  I recommend the creation of a System Restore Point before trying new drivers.