Windows compatibility HP MINI 1115NR 8

Similar Questions

• Hello. I just use boot camp to install windows on mac mini after I partitioned my hard drive. It works perfectly. How can I run OSX?

  Hello world.

  I just installed 10 windows in my mini mac using boot camp.

  It works perfectly, but I don't know how to restart my computer using the OS x operating system.

  Restart with the Option key or X is pressed or select the Mac OS X system in the startup disk Control Panel.

  (137589)

• Dragon Naturally Speaking has stopped working, how to turn off Windows compatibility mode?

  How can I turn off Windows compatibility mode

  I use Dragon Naturally Speaking (DNS) and all of a sudden it will not open. The info, after trying MANY proposed options, says "turn off Windows compatibility mode.

  Hello

  1. don't you make changes before the show?

  Try the following steps to disable the compatibility mode.
  a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
  b. click on the Compatibility tab.
  c. in compatibility mode, uncheck the box "run this program in compatibility mode for".
  d. click ok to apply the changes.
  e. check if the problem persists.

  If the problem persists, then contact the program vendor support team:see Dragon NaturallySpeaking support

• Windows 8 Embedded Standard doesn't have a "Full Windows compatibility"?

  Hello

  I am trying to determine what version of Windows Embedded might be the right one for a particular product. The comparative table of features at https://www.microsoft.com/windowsembedded/en-us/windows-embedded-8.aspx indicates that the Standard edition version does not "Complete Windows compatibility". In the datasheet, I could, unfortunately, not to determine which features of Microsoft compatibility refers to. Does anyone know what restrictions apply?

  Thank you!

  Dominik

  Hello Dominik,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Thank you

• Internal Broadcom 802. 11 b / g adapter connects not (HP Mini 1115NR)

  Hello, I have a 1115NR HP Mini I just signed up. Whenever I try to connect to the wireless network, just, it says «Waiting for network...» ", and then disappears without connection (as shown in the image below)

  

  I tried many settings on my wireless router, including the amendment of the security to WPA2-PSK, WPA - PSK (TKIP and AES) and Auto WPA and WPA2 while changing the settings to match on the PC. I don't want to try WEP because it would make the speed only A/B/g, not N, which is used by another laptop. The PC is under Windows XP Home Edition. My router is a D - Link DIR - 615 A/B/G/Draft N router connected to a cable modem.

  Any help would be greatly appreciated, if you need more info to help me, just ask.

  Thank you

  Message edited by Michael11798 on 06/25/2009 18:09

  I solved my problem by resetting the router and affecting the WEP security.

  Thanks for the help,
  Michael

• Need to deliver a "Fix" for Windows Compatibility Manager product. (Check Solutions)

  Back there, I was warned by Microsoft of a program compatibility problem in a program of mine. I came up with a fix that allows the program to now running vista and need to post a fix for this.

  So that users 'get messages when a fix is available.

  How can I do this?

  Thank you very much.

  Hello ADevGuy,

  Thanks for posting on the Microsoft answers Forum.

  I believe that this is the site you need for help with your Windows Vista software.
  http://msdn.Microsoft.com/en-us/Windows/dd203105.aspx

  This is for the Windows Logo program. They should be better able to help you with your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Bypass the Windows on HP Mini password

  I like so many others, I forgot my password of Windows (Windows 7 Starter Edition) on my HP Mini 110.

  Is it possible to bypass the Windows password so that I can reset IN Windows?

  I tried to boot from a drive (formatted FAT) flash via the system BIOS, but it does not save the flash disk (I had Hirens Boot CD agenda on this subject).  The USB port works fine.  Must the Flash be formatted differently?

  Is there another way to bypass the Windows password?

  Thanks in advance,

  Mr. Bog

  Don't worry guru s... my companion sortted out!

  I downloaded Hirens Boot CD ISO program on the FlashDrive again, but this time on an NTFS formatted drive and not a FAT formatted the flash drive.

  Once flash player has been recognized, I used the option rather than start Windows XP program boot BACK and then follow the steps.

  SORTED now.

• HP mini 1115nr 110: forgotten password

  Hi the new Iam on this I have hp mini 110-1115nr current password need not tried them all NO work my error code is CNU9455SYB YOU have so much more a good Thank YOU.

  Hello

  Enter e9lovqqnip (3rd character is a lowercase L)

  Kind regards

  DP - K

• Restoring Windows XP on Mini 110

  I "inherited" a mini 110-1045DX, and he had installed ubuntu on the original XP. I have nothing against ubuntu, but

  I need Windows XP. I did an installation of a new (unopened) Win XP Pro. Interestingly, I was not

  same prompt for a product key and the installation went perfectly. Two problems:

  (1) display is too "fat".  Not really a big deal.

  (2) No ethernet adapter. This is a big deal.

  (A) I am aware that HP no longers supports XP, but is there a place where I can download legitimately

  a copy of XP for the min-110?

  (B) if not, where can I download graphics and ethernet cards?

  TIA

  Tim

  Favorite of these pages

  Drivers here

  Home page for this model

  Note, if you have used an HP Recovery disc to restore XP, there product key pre loaded, there should be a second disc with the drivers and software, but it is preferable to obtain the latest driver available from the link I gave you.

• Windows 95 to Windows 7. Windows compatibility works do not to install from dos/Windows 95 version of Master of Orion 2. Is there another way?

  Hello

  I have a dos/Windows 95 master of Orion 2 and really desperate male relative.  Is it possible to install this game on a Windows 7 system?   He repeats to me that there is a mismatch due to 64-bit system.  I used the program in the control panel for trying to install programs designed for earlier versions of windows, but the compatibility program was not able to help me.  I also tried the right click on the Setup icon, select properties and change the compatibility of the system, but also the resolution here, but alas no luck.  Thank you!

  Hello EBahama.

  If its a DOS game I would suggest using DOSBox.  It's a bit complicated so I won't have a full run down here.  But assuming that this male relative has used BACK before he shouldn't have any problems.

  If it is a real 16-bit Windows application.  Then you could use a Virtual Machine, assuming that your CPU supports the required technology (many do not) and installs an earlier version of Windows on them.  Unless you use the professional version of Windows 7.  Then you can download 'XP Mode' which is a virtual machine that comes with a copy of Windows XP.

  A failure there is a Master of Orion 3 released a few years ago, I'm not on top of my head, if its compatible with Windows 7 64 bit.  But there are also the Sins of a Solar Empire, which is compatible, is a little different, because his real time, but his little near the same concept. :-) Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• HP mini 200 computer: need help windows of hp mini 200 7 - 32 bit

  I lost power to my laptop (hp mini 200, windows 7-32 bit), I didn't have the battery connected.
  When I start the computer it will not work and gives me the message. Saying the found boot device.
  Please indtall an operating system on your hard drive.
  hard drive (3FO)
  For more information, please visit:www.ho.com \go\techcenter\startup

  In the main bios HDD self-test menu shows there is no hard drive, memory test pass and click ok.

  I have the family photos and videos in this computer that I can't afford to lose.

  How can I recover my computer or the files?

  Help, please.

  Nharis

  It could very well be too late for photos and videos.  When a hard drive crashes, it is hard to say whether something can be salvaged or not.  The best bet is also replace the failed hard drive and on a work computer connect the player down with an adapter LIKE THIS.  Then boot from a Linux Live CD to examine the failed drive and move all the data to the CD/DVD drive Flash

• Neverwinter Nights Diamond windows compatibility problems

  Origianal title: Neverwinter Nights Diamond works with Vista?  If yes how to operate?  It works with Windows 7?  If so, how? Thank you

  Finally after many years and several accidents have completed Baldurs Gate II and Throne of Bhaal.  Bought Neverwinter Nights Diamond pack 2 years and finally able to load - surprised a compatibility problem does not work.  Even my Baldurs Gate II and Throne of Bhaal worked.

  Hello

  Once I was able to downloadand patch and then run the compatibility problem solver in the programs control panel

  Make older programs in this version of Windows

  I was able to get the game running in Windows 7 and Vista.

  Vista I deleted the shortcut on the desktop, as I had it already installed before finding the compatibility issue.  When I installed Windows 7 I chose not to install the shortcut - according to a thread I had followed.

  The most difficult thing to solve the problem was to find the patch. I can not even find the page it is on, but when I typed

  Installation for Win7vista NWN1 includes links patch - the right page came

  I'll try and copy and paste the link into this but do not know if it will work.  This is the file you need with never Winter Nights Diamond toget it works.

  http://files.BioWare.com/neverwinternights/updates/Windows/English/NWNEnglish1.69HotUUpdate.exe

  The forum was http://social.bioware.com/forum/1/topic/187/index/3341490/1 , although I wasn't able to get the intothat by typing.

  The patch downloaded and installed very easily.

  After you have installed the patch, I ran the "make older programs run in this version of windows" - using XP service pack 2 (Vista) and either 2 or 3 in Windows 7.

  It's located under Control Panel - programs - but I think that the classic view.

  best regards to all the help on this forum

  Wendolyn

• windows compatibility 8 hp scanjet 5500c?

  Hello

  I have a 6910p 32 bit hp laptop upated with windows 8 pro. I have a hp scanjet 5500c scanner. There is no update for windows 8 drivers on the hp Web site. All my other devices I've used XP work fine. I tried to load the software provided with the scanner in XP compatibility mode nothing works. Is it possible that I can get this scanner to work on this computer?

  Thank you

  Thinman

  Hello

  Based on the following, no work around so only one option: buy a new one or use it with other machines (not W8).

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=CS&CC=CZ&TaskID=130&prodSeriesId=77374&prodTypeId=15179&ObjectID=c03408379

  Kind regards.

• Dell Photo All in One 964 - 10-64 bit Windows compatibility

  Hello

  I just bought a new Dell laptop and updated to Windows 10.
  Unfortunally, my OS is unable to recognize the driver for my old printer Dell Photo All in One 964.
  I have read all the post on compatible with this specific printer driver. I tested the procedure:

  -remove the printer

  -install the driver Windows Vista - 32 bit or 64 bit and put Vista SP2 compatibility mode (also compatibility mode with Windows 7 and windows 8)

  -Connect the usb printer. But only the Scan is installed successfully.

  any help will be really nice!

  Thank you very much

  / Reg

  I installed the driver R146813 and it worked very well, for scanning and printing.

  Sure to first temporarily disable your anti-virus firewall before running the Setup.exe that comes with this driver. Complete the configuration all the way, including the print test page. Turn the firewall again later.

  The R146813 driver can be downloaded from www.dell.com/.../DriversDetails

• Unable to access the Player Windows Media Player mini

  Windows 7 & WMP 12 Mini Player

  I used the mini Player (taskbar) all the time in PX and vista. I was wondering why he was left out of WMP 12 and Win7? I was hoping that if a programmer reads this, you can add it before the release. (PLEASE!)

  Jasqid,
  The preview area when you highlight the WMP in the front to the back and play/pause buttons.

  So far, this is what I personally found it to be a good way to navigate.

  I agree with you, the Windows Media Player toolbar is very useful.
  It may have been infavor removed for a sleeker interface (consider the WMC gadget that you can add to your desktop).
  Whatever, lets see what the future result will, of course, Windows 7 is not yet complete. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.