Windows could not ther full size

Similar Questions

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• Windows could not start HomeGroup Listener

  Windows could not start HomeGroup Listener on. Local computer. For more... the 2147023817 service-specific error code. I also have a problem with the provider of the home group. . I tried almost every thing. .. .i can join the Group of home. Thank you

  Don t think it has something to do with the Toshiba laptop.
  It looks like more because of Microsoft.
  Found this discussion in the Microsoft forum:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/453c3e1d-A980-417C-a6e6-d4c5c1af79a1

  _Someone wrote there: _

  + For those of you who could not startHomeGroup service listener and HomeGroup provider to ensure that these services are started and set to automatic: +.

  +-Function Discovery Provider Host +.
  +-Function Discovery Resource Publication.

  + (Activate in the following order): +.
  +-Peer Networking Identity Manager +.
  +-Peer name resolution protocol.
  +-Peer Networking Grouping +.

  + If these services are disabled this is maybe the reason why you couldn't create a homegroup. +

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• "Windows could not complete the installation", Y510P

  Hello

  Just got my new Y510P and realized it's impossible to start Windows.

  Initially it displays error "Windows cannot parse or process Unattend...» [... \unattend.xml] [oobeSystem] pass... »

  After reboot he start to display a different message - "Windows could not complete installation, restart the installation.

  The operating system is Windows 8.1.

  Looks like I'm not the only person having this problem. System recovery does not help, of course (as well as the graceful Lenovo tech support).

  I think that the problem caused by the incorrect unattend.xml file that fails to install any software because of this error and unnesessary blocking Windows to complete the installation.

  I see no other way rather than installing Windows from another source. I don't want to pay for another Windows license and instead return the Lenovo laptop, but perhaps there is another way?

  Problem solved.

  I contacted Lenovo support and they offered me to send recovery discs I received a few days later. I installed the cleaning system of records and have not experienced any problems since.

  I'm still not fully satisfied because I cannot reset the laptop to the factory settings without these discs, but I think I can live with that.

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• "" Switch USB SanDisk Cruzer 4 GB not format error "Windows could not format.

  Original title: Switch USB SanDisk Cruzer 4 GB will not format...

  Whenever I try to format it, it says "Windows could not format.

  According to the ability that she reads, 64 MB.
  File system: FAT (default)
  Allocation unit size: 1024 bytes
  Oh and I have Windows Vista. I have another flash drive even space and everything and it did not happen to her. All reviews are useful.

  Hello

  Try to format it in Windows Disk Manager.

  See the following steps:

  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the Navigation pane, click Disk Management.

  c. right click on the partition or drive that you want to format and then click on format.

• Windows could not start. A recent hardware or software change might be the cause.

  I have a Toshiba M300 and it fails to start. Here's what he said.

  Windows could not start. A recent hardware or software change might be the cause.

  If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Lanch Startup Repair

  Start window normally

  Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!

  PLEASE HELP :(

  Hi Suzanna2001,

  Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update).  You have access to a Windows CD/DVD?  Run the startup from the CD/DVD repair.  There is also an option to perform a restore of the system on the CD/DVD.  If no option is the problem, follow the steps below:

  1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.

  2. from the command prompt, run the following command:
  DISM image:c:------/ Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
  Status: installed
  Output type: security update
  Install time: 02-11-2010 13:01

  3. find the most recent and then make a note of the identity of the package.

  4 run:

  DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)

  Until it is complete, you will get a status of the collection.

  5. restart your PC.

  You want to start with the most recent, and then remove them one at a time to find the problem update Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 80072EE2: Windows could not search for new updates.

  I am unable to get the Windows updates.  I repeatedly receive 80072EE2 error code: Windows could not search for new updates.  The help of instructions indicate I would add three updated addresses my firewall.  I am running McAfee Total Protection with a firewall, but I don't see an option to add addresses.  Do you have suggestions about this problem?

  Hello

  Did you face this problem after installation of McAfee?

  Follow these steps:

  Method 1: There is no option to add the URL of Web site in McAfee firewall.  However, you can add the URL in the filtered McAfee Web site. Click Parental control, clicking n config on the right panel, by clicking the forward button, and then click filtered Web sites on the left had Panel Add URL.

  Windows Update error 80072ee2
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Run the Fixit and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

   

  Method 3: If this does not help, you can temporarily disable the antivirus and check if that helps.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Windows could not search for new updates. Error 8024402f code. Fix available?

  Windows could not search for new updates. Found error 8024402f code. I tried everything, but the problem has not been resolved.  Vista service pack 2 build 6002. is any kind of fix available? I tried the fixit. It shows the Update component must be repaired and there is no problem, but in fact it is not the problem. Updates have been arrested?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  If the fixit doesn't do the trick, you will need to manually go through the troubleshooting utility.

• Windows could not configure one or two components of the system.

  I get this message after completing my update, Vista Home Premium 64 Vista Ultimate 64. All solutions?

  Hello

  1 you have a Windows Ultimate Upgrade disc, a complete edition of the full Windows disk or a Windows Anytime Upgrade disc?

  2 - is Windows XP or Windows Vista already exist on the computer before you install Windows Vista Ultimate?

  Currently, I suggest referring to the following troubleshooting article and thread:

  Windows could not configure one or more system components

  http://forums.Microsoft.com/technet/ShowPost.aspx?PostID=2409427&siteid=17

  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  http://support.Microsoft.com/kb/946078/en-us

• Windows could not search for new updates (error 800F080D)

  original title: Windows could not search for new updates

  Errors found: Code 800F080D.  Could be anti-virus software related as it seemed to stop working when I performed an anti-virus scan.

  HI gdm21,

  Since you have questions, even the installation of system update readiness tool. There may be a corruption of the system which causes this error and updates to fail.

  Just ensure that you have run through this repair tool: http://support.microsoft.com/kb/929833

  Do you get errors when you run this?

• Windows could not start. A recent hardware or software change might be the cause. (vista)

  I've updated pctools free and there was a mistake by because it came when the computer restarts,

  Windows could not start. A recent Ministry of hardware or software may be the cause. To solve the problem.

  1. Insert the windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer".

  File: \windows\system\drivers\PCTCore.sys

  status: 0xc0000098

  Info: windows could not load a critical system driver is missing or corrupt.

  I tried I went to my computers startup options advanced and tried to run in safe mode, but the same previous screen came. Each option in my boot options is the same screen. I realize that to solve this problem, I might have to reload my OS together.  I tried to put what I believe to be the installation disc in and restart but it starts and says the same message. I don't know how to start from the DVD.

  Someone at - it solutions?

  Change the boot order in the BIOS to boot from the CD drive first.
  How to change the boot sequence in the BIOS
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  C:\windows\system32\drivers\pctcore.sys file information
  http://www.file.NET/process/PCTCore.sys.html

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• Windows could not complete the installation - Message in Vista 32

  Windows could not complete the installation. To install windows on this computer, run the Setup again.

  I get this message when I switch on my compaq CQ40 with Vista 32. From this screen, I can go into Manager tasks and go online, see the program files on the C: drive, change passwords, etc. Anything except support Vista. I just downloaded and installed SP2 via the Task Manager. Always stops after the Welcome screen. Another thing I never noticed before: during the boot and just after opening orb, the Welcome to Windows message lights up with the small circle of progress, then I hear a sound of gong just before startup fails. Curious. Any help out there?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all