Windows crash 0xc000000f. What is missing?

Similar Questions

• I can't open attachments to email... He keeps trying to open it in Windows Media... What is missing here?

  I can't open attachments to email... He keeps trying to open it in Windows Media... What is missing here?

  Save the attachment to disk.  Then right-click on it and choose open with (or go to properties |) Change) and then designate the good program with which to open the attached file.

  Steve

• Windows crashes software when it cannot verify the Publisher * found the problem

  * Found the problem, thank you anyway

  I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls.

  I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.

  To protect your computer, Windows crashes software when it cannot verify the Publisher. »

  I have read a dozen forums and tried all the tips. I don't know what I'm doing wrong.

  I tried going into the tools of IE tab and changing the security options to "allow software to run or install even if the signature is not valid.

  I unchecked the boxes to "verify signatures.

  I passed the security settings and select: fast for "Unsigned download Active X controls" and: ask the user 'initialize and script ActiveX controls not marked as secure..'  and 'activate' to 'run ActiveX controls '.

  I even added the IP domain in my zone of confidence and lowered my security level to 'low '.

  I also remembered to close and restart IE.

  I always get the error message when you try to leave the site to install ActiveX. controls.  FYI the ActiveX is remote viewing of a security camera.

  If anyone has any other clues that could help me with this problem I would be very grateful.

  Fancy

  Thanks James, but I found the problem.  There was an extra box that I neglected to "verify" that allowed to install unsigned files.  I thought I had checked and unchecked everything related but I missed a.  Scary lengths windows go to protect me! :)

  Fancy

• WD420EA (Pessario CQ 61-416SA): windows 7 64 bit of missing files

  Hello

  Need help, I want to install the free updates for windows 10 but my current Windows 7 Home Premium Operating System

  Fair froze and crashed recently. Windows told me it was missing some files in 64-bit windows, and it's why some windows updates do not work. Unfortunately I can only find recovery discs that I made of the new factory for partition 1 and partition system 2 but not the partition 3.

  What's on the 3 partition?  What does not work when I can't reinstall partition 3?

  Greetings

  franklucky

  franklucky

  Hi people, Fried TM amd Alexander, all saved files. Looking for a missing or damaged files with the File Checker w7 system;

  answer: Windows resource protection did not find any breach of integrity-(dans la normale ne parler aucun fichier manquant ou endommagé).

  I was looking for an original windows message that I had w7 64 bit missing files. Can't find it.

  What to do now?

  I am attaching a couple of problem my monitor reliabillity reports can be a computer Wizard has some ideas

  Reliabillity reports
  Source
  GWXUX

  Summary
  Stopped working

  Date
  30/07/2015-20:41

  Status
  Report sent

  Description
  Path of the Application of vulnerabilities: C:\Windows\System32\GWX\GWXUX.exe

  Signature of the problem
  Problem event name: APPCRASH
  Application name: GWXUX.exe
  Application version: 6.3.9600.17923
  Application timestamp: 55945dbd
  Fault Module name: kernel32.dll
  Fault Module Version: 6.1.7601.18869
  Fault Module Timestamp: 556366fc
  Exception code: c0000005
  Exception offset: 0000000000014ac5
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 6153
  Additional information 1: b250
  More information 2: b25048c98648e10507454fdaaf0e17c2
  Additional information 3: d447
  Additional information 4: d447ef5354dbd79595d4531d0183754c

  Additional information about the problem
  Bucket ID: 15984171

  ____________________________________________________________________________________________________________________
  Source
  Java (TM) Platform SE binary

  Summary
  Stopped working
  Date
  05/04/2013 21:48

  Status
  Report sent

  Signature of the problem
  Problem event name: BEX
  Application name: jxpiinstall (2) .exe
  Application version: 7.0.210.11
  Application timestamp: 515d7d24
  Fault Module name: jxpiinstall (2) .exe
  Fault Module Version: 7.0.210.11
  Timestamp of Module error: 515d7d24
  Exception offset: 00012f52
  Exception code: c0000409
  The exception data : 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 6153
  Additional information 1: 1cb9
  More information 2: 1cb95de7a6ad4b0308d53e428974ecdf
  Additional information 3: e83f
  Additional information 4: e83f39cc071f09eaabcfb193a5652a33

  Additional information about the problem
  Bucket ID: 3581445476
  Source
  Capture NX - D

  Summary
  Stopped working

  Date
  04/01/2015 01:07

  Status
  Report sent

  Description
  The failing Application path: C:\Program Files\Nikon\Capture NX-D\Module\CaptureNX-D.exe

  Signature of the problem
  Problem event name: APPCRASH
  Application name: CaptureNX - D.exe
  Application version: 1.2.0.3001
  Application timestamp: 54f29b2e
  Fault Module name: MSVCP110.dll
  Fault Module Version: 11.0.51106.1
  Timestamp of Module error: 50988283
  Exception code: c0000005
  Exception offset: 0000000000008f3b
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 6153
  Additional information 1: b18c
  More information 2: b18cce5cfcaf8e83eaf66c9bf3faf905
  3 more information: 3a 79
  Additional information 4: 3a7914d1fd2d137b1a842898842a7707
  ________________________________________________________________________________________________________________________________

  Source
  Diagnostic monitoring service

  Summary
  Stopped working

  Date
  13/05/2015-18:18

  Status
  Report sent

  Description
  Application of vulnerabilities path: C:\Windows\System32\svchost.exe

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_DiagTrack
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc3c1
  Fault Module name: ntdll.dll
  Fault Module Version: 6.1.7601.18839
  Timestamp of Module error: 553e8bfa
  Exception offset: 000000000006ec12
  Exception code: c000000d
  The exception data : 0000000000000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 6153
  Information additional 1: 864 b
  More information 2: 864b0c436507241b920bd36cfc9e0a57
  Information additional 03:18 c 1
  Additional information 4: 18c1cb13e26248d802ff3d4292311bc0

  Additional information about the problem
  Bucket ID: 253861191
  ________________________________________________________________________________________________________________________________

  Source
  OpenOffice 4.0.1

  Summary
  Is not responding and was closed

  Date
  09/03/2015-12:51

  Status
  Report sent

  Description
  A problem caused this program blocking interact with Windows.
  Of vulnerabilities Application path: C:\Program Files (x 86) \OpenOffice 4\program\soffice.bin

  Signature of the problem
  Problem event name: AppHangB1
  Application name: soffice.bin
  Application version: 4.0.9714.500
  Application timestamp: 5237a 093
  Hang Signature: 3e1f
  Hanging Type: 1
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 6153
  Signing of additional blocking 1: 3e1f186646a0e59eb4ce631bf8006456
  Signing of additional blocking 2: 7bea
  Signing of additional blocking 3: 7beaa8a2fda5c6e4a5e5c4352894298e
  Signature of blocking additional 4:7290
  Signing of additional blocking 5: 7290935a861d7887b6f64129eec95c31
  Signing of additional blocking 6: f6b2
  Signing of additional blocking 7: f6b2d02e4116a1dcfab1c953532312a8

  Additional information about the problem
  Bucket ID: 3905339746

  Source
  2.1.5 media VLC Player

  Summary
  Stopped working

  Date
  01/07/2015-01:28

  Status
  Report sent

  Description
  Failing the Application path: C:\Program Files (x86)\VideoLAN\VLC\vlc.exe

  Signature of the problem
  Problem event name: APPCRASH
  Application name: vlc.exe
  Application version: 2.1.5.0
  Application timestamp: 00000004
  Fault Module name: vlc.exe
  Fault Module Version: 2.1.5.0
  Fault Module Timestamp: 00000004
  Exception code: c0000005
  Exception offset: 00001a1d
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 6153
  Additional information 1: b9e4
  More information 2: b9e4801dc6206accc9fd1114a6ee0847
  3 more information: b9c2
  Additional information 4: b9c2ce8051224c868c6d26eeea0921f0

  Additional information about the problem
  Bucket ID: 398977153

  franklucky wrote:

  Hi Fried TM,

  in the partition my computer Hp 3 are three files:

  File - HP with the dialog system 24/04/2010

  -HP_WSD.dat 26/032010

  -HP_Rep 28/03/2012

  This prompted me to look at all the data disks and I found a disk to repair windows from 5.12 2013 and also three recovery discs more for all partitions of three but no date is indicated on them. (They could be 2010 or 2012?) I'll just try

  to repair windows 7 and wait with other decisions.

  First I backup all files over the weekend. And will try to fix next week. Thank you, it was good advice, I'll keep I will keep you posted how it works.

  Keep the faith (what it means, it's slang here)

  Thank you

  Franklucky

  FriedTm wrote:

  Well, if you have an hp computer (when you are on the hp site, you should have one) the third default partition is the recovery partition. Your computer can operate without it but if errors such as what do you call pop up from the recovery partition is an easy place to fix it. You can however quickly see what's in the score, by going to my computer and clicking on the disc.

  What about installing windows 10 is very difficult to do it a few times, it is extremely fickle in the way he wants to be installed. I recommend to maintain up to w10 w7 is more finished.

  -HP_Rep

• After loading Windows - crashes BSOD on Portege A200

  Portege A200 Windows XP;

  Before windows has finished loading a blue screen appears and the machine stops. Prior to that, the machine was intermittenlty off without apparent reason. The last thing I did before this happened has been updated to IE 7. Ran scandisk, but has not fixed anything.

  Can start in safe mode but impossible to uninstall IE7 in safe mode. The option selected to load windows last config that worked to option, but windows crashes before the end of loading. Restoration of the system to consider the return to January 08 but still the same problem.

  Any advice would be appreciated.

  In this case, I would recommend do you a clean installation of OS. As you can see that nothing done. I don't really know what you can try, but I really don't think that you will be able to do anything.

  Save all your data important and make the clean OS installation. I know it's quite radical solution but, believe me, one that suits.

• Windows crash at startup of Skype or installation.

  Hello, the drafting of the Austria. I have a big problem, but no member of the German community gives me an answer. The problem is on a laptop of HP, APU AMD E-450 with integrated graphics Radeon HD 6320. I run win7 64 Bit SP1 with all updates you may have. Also the drivers are up to date. Now every time when I install Skype latest version and I will start... Windows crashes.
  The screen is biased and Windows freezes. Or it goes into a blue screen MS and Windows starts again. I tried a lot of things: reinstall, uninstall Microsoft fixit, also with CC Cleaner tool. Reinstall again after that. Also uninstall the webcam (it's a youcam) there was also a solution where you can fix the .exe in a /lagacylogin mode, I tried also.
  Only Skype began in the mode of Windows security. So I don't know what the problem is. Thanks for help :-)

  Restart your computer in Safe Mode with network and then try to start Skype.

• 10 Windows crashes after installing the BootCamp drivers

  I have an iMac (end of 2013). I want to install Windows using Boot Camp 10.

  Windows Setup runs smoothly and without errors. Problems begin when I start to install the software of BC. First problem is installing, it stops at the Realtek audio drivers and does not continue. I followed the following steps: boot camp installation hangs at realtek audio stepSearch or ask a question and it worked. Until I rebooted the computer. After installation, Windows does not start and displays either a screen with the sad face or runs the Startup Repair. Startup Repair is unable to do anything, only the Windows reset, it works.

  One last thing. I have a Samsung 850 Evo Pro custom-replaced drive. Some time ago I installed Windows on it normally and it worked until I made a few changes to the partitions on the disk. Strangely, without changing the size of partition, Bootcamp, Windows crashed in itself.

  What can I do now? Windows can operate normally without driver from Apple? I understand some features will be limited, but as I noticed it works well without driver BC.

  You have a Fusion drive? Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  If you have a Fusion drive, please add

  sudo TPG - vv - r see the/dev/disk1

  sudo fdisk/dev/disk1

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Windows crashes, Windows search does not work, EVENT ID 7042, 1006, 3024, 7040

  When I ran the pc fix - it sollution for windows crashing the results were as follows: Windows search does not work.  The reason;  An event id is logged on to windows search.  Event id numbers are... 7042, 1? 006, 1000, 3024, 7040.

  I'm sorry to say that I do not understand what it means, so I have no idea how to solve this problem.  Your help would be greatly appreciated... ty B.Gregory

  Hi beckilu,

  1. what operating system do you use?

  I suggest you run the fixit from the following link and see if that helps.

  Fix Windows Search when it crashes or shows no results
  http://support.Microsoft.com/mats/windows_search/en-us

• Windows can't start because\windows\system32\config\system is missing

  original title; Windows cannot start because\windows\system32\config\system

  I did a system restore, and when he went to restart blue screen came to say windows didn't start because he would cause damage. Then I went to Advanced menu and it does not start even with safe mode. but it says that \windows\system32\config\system\ is missing... Help, please

  Hi jerijenks,

  · What is the number and the model of the computer?

  · The operating system comes preinstalled on the computer?

  · What is the service pack installed?

  · Why were you running system restore?

  See: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

• I typed the letter e in the search box on the start menu, press ENTER. The screen went black. Press ESC, nothing, then ctrl + screen esc returned a second then went black, once again, then crash! What have I done?

  I typed the letter e in the search box of the start menu and press ENTER. My screen went black. I hit esc. control, Press esc. set up the start menu, then screen went black again then the computer crashed. What have I done? OS = vista Home premium

  Hey Mike,

  I'm unable to reproduce successfully what experienced you. Does this occur at any time using the computer?
  One thing, you can try to get more information about what happened to check the event viewer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  For more information on what to look for in the event viewer, you can look at this article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  Can't wait to hear back on your part.

• Windows system32 config system is missing or damaged vista!

  OK, I got this message (windows system32 config system is missing or damaged vista) when I start my computer and I don't have a Setup disk or the recovery disk? How can I fix it?

  and I was wondering if I could upgrade to windows 7 same with that?

  The upgrade must be done out in a Vista operating system.

  If you cannot start in Wiondows:

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows\System32\Config\System is missing or damaged is

  I received this message saying windows\system32\config\system is missing or damaged. Windows Vista is already installed in my laptop, so I don't have the repair disk to fix this. What should I do now?

  I received this message saying windows\system32\config\system is missing or damaged. Windows Vista is already installed in my laptop, so I don't have the repair disk to fix this. What should I do now?

  Hey Saucilito

  the link below is how to download and do a vista Startup Repair disk

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use it

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  and if you need to reinstall vista

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Walter, the time zone traveller

• Windows crashed when switching from Windows 10

  Original title: Windows 10

  This is my story, gang...

  A few months ago my Office worked on Windows 7.  Then, the free update of Windows 10 has been offered.  So, I did the upgrade.

  After a week or two, I decided that Windows 10 just wasn't for me and opted to return to Windows 7.  I followed the quick screens (to make the transition) and during the process, Windows "crashed" and mucked up throughout the system.  This glitch has left me WITHOUT Windows operating system, be it...

  Oh and the kicker is, I had to replace the hard drive (in my desktop Dell) at least twice since I bought it.  There is therefore no way I can reinstall my old Windows 7 (because of problems product keys).  And believe me, I tried.  Having to buy a new copy of Windows is out of the question, at this time.

  Suggestions?  Everyone... ?

  Thanks for your time!

  This is my story, gang...

  A few months ago my Office worked on Windows 7.  Then, the free update of Windows 10 has been offered.  So, I did the upgrade.

  After a week or two, I decided that Windows 10 just wasn't for me and opted to return to Windows 7.  I followed the quick screens (to make the transition) and during the process, Windows "crashed" and mucked up throughout the system.  This glitch has left me WITHOUT Windows operating system, be it...

  Oh and the kicker is, I had to replace the hard drive (in my desktop Dell) at least twice since I bought it.  So no way I can reinstall my old Windows 7 (due to problems product keys). And believe me, I tried.  Having to buy a new copy of Windows is out of the question, at this time.

  Suggestions?  Everyone... ?

  Thanks for your time!

  Hello

  Do not understand what you mean by PK issues.

  But your relocation options.

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).

  As you have licensed preinstalled OEM (Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee, IF they still have them available.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  See you soon.

• my laptop is stuck in restart asking the media to reboot. I don't have a cd/dvd for windows 7 then what do I do?

  Hi after have been stupid enough to download windows 10 and realize it is absolutely rubbish, that I decided to go back to windows 7. Unfortunately Windows 7 will not reinstall it is now stuck on reboot

  I don't have a disk to reboot my asus windows key does not work so I can download my tablet with a help of usb!

  I need to restart my laptop, Microsoft crashed it not me it worked perfectly until windows 10! Please give me instructions on how to restart and how to get a dvd or a Windows 7 usb download.

  You may need to try using the recovery partition or borrow Windows 7 reinstall media or ask ASUS recovery media:

  Try running the recovery partition:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  ------------------------------------

  This is how the recovery partition is accessible to most popular brands...

  For Asus, press F9, as soon as you see the Asus logo.

  If you know a friend with a disc of Windows 7 at retail, you could borrow them and perform a custom installation:

  How to: What are my options for Windows 7 reinstall media?

  If you are able to get a drive, see the instructions how to perform a custom installation:

  How to: perform a customized Windows installation

  If none of the above solutions don't agree, its best you download Windows as a 10. ISO and perform a custom installation:

  See the instructions: How to download official Windows 10 ISO files

  Review link instructions how to perform a custom installation.

  Contact ASUS:

  ASUS

  http://eStore.ASUS.com/shop

  1-888-678-3688 or

  1-510-739-3777

• Windows crashes when you watch videos

  Windows crashes when I look at the videos and it will start working by itself after a while. Help, please

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?