Windows crashes after and during games

Similar Questions

• Windows 8 crashes often and during reboots

  I just got a new Lenovo Y410p the other day. There the new i7 and 2.4 ghz processor haswell. In windows 8, after an update (I think it was due to the updated, but not quite sure), my computer freezes during almost any process anyone surfing the internet, explore, antivirus scans, etc. It does not completely freeze, I can still move my mouse and windows program around, but EACH program rowed terribly and takes a few minutes to complete the simplest of tasks. I constantly have to do a closed down hard because it hangs on reboot screen and does is display "reboot" with the movement of the circle of load and displacement, but it does not restart. If I have too many programs open, my computer crashes. My mouse freezes never really, but programs to make and I can't do anything. It becomes very frustrating. I downloaded all possible win8 updates and tried to download the driver for my graphics card. I tried to run CCleaner to reduce bootups program at startup and to clean the registry. He tries to remove some files not in the registry windows in general but can never finish the deletion of those articles since it crashes.

  Hello

  If this problem started after a Windows Update, then try to perform a system restore to a date when the computer was working fine.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  System restore warning: Application /programmes. that were installed after the last restore point will be lost. You may have to reinstall programs and applications.

  In addition, through https://support.microsoft.com/find-solutions/windows/windows-8/performance-maintenance/fixing-hangs-freezes-does-not-respond-errors?wa=wsignin1.0

  Hope the helps of information. If you have any questions, let us know.

• 10 Windows crashes after installing the BootCamp drivers

  I have an iMac (end of 2013). I want to install Windows using Boot Camp 10.

  Windows Setup runs smoothly and without errors. Problems begin when I start to install the software of BC. First problem is installing, it stops at the Realtek audio drivers and does not continue. I followed the following steps: boot camp installation hangs at realtek audio stepSearch or ask a question and it worked. Until I rebooted the computer. After installation, Windows does not start and displays either a screen with the sad face or runs the Startup Repair. Startup Repair is unable to do anything, only the Windows reset, it works.

  One last thing. I have a Samsung 850 Evo Pro custom-replaced drive. Some time ago I installed Windows on it normally and it worked until I made a few changes to the partitions on the disk. Strangely, without changing the size of partition, Bootcamp, Windows crashed in itself.

  What can I do now? Windows can operate normally without driver from Apple? I understand some features will be limited, but as I noticed it works well without driver BC.

  You have a Fusion drive? Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  If you have a Fusion drive, please add

  sudo TPG - vv - r see the/dev/disk1

  sudo fdisk/dev/disk1

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Uşaklar and again Atikmpag.sys bsod crash after and after and after

  It all started in a Sun and a nice day I turned my G62-b13ST and after some time it crashed and I googled and I saw that the driver Sweeper and downloading might be a solution I thought. After I've deleted and updated the driver, he arrived after and after and this situation atikmpag.sys and finally ended up here im desperate and hopeless.

  I tried the solutions in the internet and ask you what to do?

  Hi DEVO61,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP G62-b13ST and constant crashing. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore.

  Here is a link to a Update for the BIOS. If this does not help, try tapping F10 key go to the diagnosis and then run the hard drive & memory test when a test fails, you will need to replace the part. Please also check if the device is more heating.

  Please let me know how it goes.

  Thank you.

• Microsoft lifecam vx-1000 gives windows crash after like 15 minutes of use

  I have a problem with my webcam (microsoft lifecam vx-1000). every time I use it more like 10-15 minutes, I get a blue screen, windows crashes and my laptop turns off. However, I can use my built-in cam as long as I want without problem. Could you please give me that a solution on the way could make my lifecam don't crash my laptop? Thank you very much!

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice

  Download/save the drivers/software for this the above link > save to the desktop > right-click on > run as Admin > install.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows crashes after leaving idle for 20 minutes approximately

  Hi, my windows hang after that I left it idle for about 20 minutes. It happens every time it is on idle. even when my leave the music player. I have searched the web for solutions and tried to start windows in safe mode or a boot of cleab nothing helps. I tried to run a SFC scan and it came up with several errors. What should I do now?

  Hello

  
  It seems that problem with the corrupted hard drive.
  
  I'm offering please contact the manufacturer of the system for the best assistance.

• E.M.P. Configurator windows crashes after Oracle Instance screen 11.1.2.2

  eHi,

  We intend to install the bases and the IR Services.

  We are able to properly configure all components, but because of the lack of space in the disc last configuration web server is down

  After that space is provided when we open EMP Configurator is crashing after Oracle Instance screen and does not go any further.

  We saw.the error in configtool.log below

  []] [2014 05-27 T 03: 23:40.177 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [loading CT documents] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.380 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [storage Init] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.427 - 07:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle. EPMINS] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: unexpected error: [[java.lang.NullPointerException at com.hyperion.cis.config.Configurator.loadClasses(Configurator.java:99) at com.hyperion.cis.config.Configurator.initialize(Configurator.java:91) at com.hyperion.config.wizard.impl.ToConfigurationState$ 1.commit(ToConfigurationState.java:80) to com.hyperion.hit.wizard.Wizard$ (Wizard.java:544) NextClass.run to java.lang.Thread.run(Thread.java:662)]]

  and underneath the error in configTool - stderr.log

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the drive to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461) to oracle.core.ojdl.FileLogWriter.writeBytes(FileLogWriter.java:391) to oracle.core.ojdl.BufferedLogWriter.writeToBuffer(BufferedLogWriter.java:335)

  Even if the space available is now EMP Configurator crashes. Help, please.

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the disk to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461)

  If this is a new installation, you can try to delete/rename user_projects & reconfigure all the components again (creating new Shared services registry). Just make sure that you have enough disk space before proceeding.

  Kind regards

  Santy.

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Performance issue Windows 7 after installing a game Psychonauts

  Original thread: I defragmented my hard drive, my computer won't start?

  While I was trying to run the game "Psychonauts" steam, which had worked fine on this computer, back on the first installation of Windows 7 I had. In November my OS stopped working completely, and to this day I don't know why. I had Ubuntu since then, and I got Windows 7 back on here again in July, the same person who bought the computer from. Psychonauts worked until I got to the world of Waterloo (a level in the game). Research online told to defragment my hard drive, so I jumped into that knowing exactly what I was doing. Smart, I know. I don't know how long it was, but all of a sudden my computer is turned off and shut right down before arriving at the Toshiba screen. I left for a few hours and came back, turned on, and ran startup repair. He finished after about 20 minutes, said I had to check Microsoft for solutions or something, then it prompted me to shut it down. I did, tried to leave it to the top, it works. Sorry for the long intro. I just want to know if my computer will be correct? Is this what I can run (the irony) to check it out? I had so many problems with it already, I don't know how much more it can survive.

  Hello
   
  
  1 is that the problem is specific to the game Psychonauts?
  2. you receive an error message/code?
  3 are you facing any other issue on the computer windows 7?
   
  Follow the steps.
   
  Method 1: resolution of Performance problems to automatically find and fix problems. If please click the below mentioned link and follow the instructions.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
   
  
  Method 2: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
   
   
  Method 3: perform the steps mentioned in the statutes of the help.

  The problems of the game performance

  http://Windows.Microsoft.com/en-in/Windows7/fixing-game-performance-problems

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/is-is/Windows7/diagnosing-basic-problems-with-DirectX

   

  Response with more information to help you.

• All windows crashes after the keychain Application

  Hello Apple and Apple community.

  I have a frustrating problem, I can't go right now, and it's annoying me...

  Several windows asking me to type my so-called "Keychain password" popped up, no matter how much I clicked Cancel.

  OK, Apple, fine, it is probably made for a logical reason. So I read about it and tried to change the Keychain password in the Keychain application, leading to a frustrating problem.

  As soon as I went to "Edit", and then to change the password, the application has frozen. After that, almost every other application or another program, I ran, would freeze and not respond. So that means I could not change the password and so could not remove the window popup permanent now asking me to type the password. So thank you Apple for your incredible technology. Works very smooth incredible guys!

  -Yes, I tried to restart my computer several times.

  -J' have OSX El Capitan Version 10.11

  Thanks to all those who have links to help me.

  < published by host >

  Please click on go > hold down the option key and don't release > then click library > Keyring > you will see a folder first alfa digital file.

  Right click on the file finally reboot apple logo & move to the trash and empty the trash.

• Help - Windows crashes after installation of update today...

  Hello

  System: Windows XP 2002, Service Pack 3 (do not know how to tell whether 32 bit or 64 bit?  My graphics are 64-bit, I think)
  Computer: Dell Inspiron 530
  Processor: Intel Core 2 Duo CPU
  Graphics card: ATI Radeon HD 2600 XT
  1 browser: Firefox (updated today) 3.6.14
  2 browser: IE 8.0.6001.18702
  Flash: 10.2.152.32 (installed today)
  Antivirus: Norton Internet Security 17.8.0.5
  Firewall: Motorola SBG900 (mentioning only because it made me more questions in the past)

  Tried the upgrade Firefox and Flash (for Firefox) today, as requested. Installed everything fine. Tried to watch a clip video on CNN.com and got the blue screen and the crash.

  I uninstalled both and reinstalled. Crashed again.

  I then tried uninstalling both still once and downloaded the Flash for IE to see if it was a Flash problem or a Firefox problem. This version crashed too - blue screen with an error message.

  A friend thought it might be a RAM problem and asked me to clean my msconfig - I did. No solution.

  I's went to the display manager provided the graphics card and then examined for updates for the device driver. Unfortunately, the system thinks I have the latest and greatest.

  It is the measure of my computer knowledge. I don't know how to disable my Norton, and frankly, not sure it's a great idea, as it has my software firewall in...  Don't know how/why/if that would even help?

  Here is the lower part of the error message I got one at the moment I am the blue screen crash (in which case it helps)...

  STOP: 0X0000008E (0XBA490925, 0XA880D820, 0XE0000001, 0X00000000)
  watchdog.sys base - address BA490925, BA90000, Date stamp 480254ab

  A simpler solution for me would be if there was a way to recover the previous version of Flash... but it doesn't seem to be only an old archived version I can find...

  Can someone help/offers solutions that a non-geek might be able to follow (and not spoil the other stuff on the computer)?  Thank you!  :-)  It lasted four hours and counting so far...  Any help would be greatly appreciated.

  Thank you very much!
  Liz
  

  Liz,

  Stop it!  Cancel not toolbars, do not uninstall codes.

  Start your computer.  Once everything is calm, open: http://www.adobe.com/products/flashplayer/

  Place the cursor over the flash window, right-click, choose settings, search for "hardware acceleratio" and uncheck it.

  They will try to tell you, this is your driver, but some adobe-wingnut has a buffer uncontrolled in its code.

  Anyway, it is fixed in the next version.

• Windows crashes after security update

  My computer does not restart after the update (as of 09/02/2011).  It tries to start, gets a blue screen of death, and then try to restart again and it never comes.  I put the recovery disk in and restore an earlier version of bring back the computer.  I turned off automatic updates and is not happy.  Can someone let me know what the problem is with this update?

  When it is appropriate to re-download the same security updates, I chose to not. We'll see how things are going.

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/2a81610f-07b9-44A0-BC24-457fd7ff39b2>

  Let us know if this helped.

• Windows crashes after installing Vista SP2

  He just showed the error when I went to install several updates, then it crashed. All programs hang in the minutes or seconds...

  IT IS TERRIBLE.

  * Title *.
  Updated to Vista Service Pack 2, an error occurred. Now, the OS crashes constantly, if she manages to boot at all. How should I do?

  immadee,
  You are able to start in one of the Advanced startup options?  If so, run the startup repair function and post back with the results of this. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows crashes after you enter the password to connect

  Hello

  I'm trying to connect to my system (Windows Vista) and once I get the password to the Welcome screen then screen black with the mouse pointer and all activity stops. The small led that flashes when the CPU turns off completely, which means there is no current activity. The only way out of this is difficult to the system startup.

  I did not go to the updates to the system. The last time that I logged it automatically ran a chkdisk.

  I can start the system in safe mode and tried to clean the boot and then start the system, the system connects and then everything freezes like before. All my services (clean boot) are off at the moment. I also tried to recover and from recovered point previous and who did not help as well.

  Can anyone provide any indication as to what may be the problem?

  You have a Vista DVD, if yes begin with him in the recovery environment and
  Choose the command line? If it's not see
  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  Type in the command prompt
   
  Chkdsk /r c:\
  sfc/scannow
   
  If this does not help
   
  Restore your computer again with the DVD. If no DVD instructions
  for a Dell but others will be similar.
  http://www.ehow.com/how_2134715_dell-Windows-Vista-factory-settings.html
  --
  ..
  --
  "LoginIssue" wrote in message news: 2c38fe18-7062-43ef-9587-43cf91518963...
  > I've tried that and all reboot I get a message saying: could not open file
  > for direct access. I event tried to do a diagnostic hard drive in BIOS
  > screens and it failed. Now it does not connect through safemode as well. Is
  > it something that I can do it again?
   
   

• Windows crashes after 1 hour to be systematically on, no matter what.

  I changed the ram, checked HD, changed mboards and removed the video card. Idem, work for an hour and then crashes. I also ran the program of verification of ram and ram is ok. Any suggestion is appreciated.

  This problem has been resolved.

  It wasn't a matter of windows7.

  April SSD firmware update fixed it.