Windows 7 BSOD when changing between LAN and Wifi network

Similar Questions

• Laptop says that I am not connected to the internet when in fact I am. The LAN and WiFi

  I recently acquired a laptop HP ProBook 4540 s. It is currently running Windows 7 Pro 64 bit.

  Although I seem to have full connectivity with internet through two LAN and WiFi, the icon on the taskbar always has a red
  'X' through it.

  When I go to the network sharing Center, there is no listed active networks and yet it shows fully connected at the top of the page.

  Because there is no active networks listed I can't change of 'Private' to 'Home' or 'Office '.

  Also, I do not believe that the computer running automatic 'windows updates' because he thinks that there is no internet connectivity.

  It can search and identify the 'local' WiFi routers and I can connect to them with ease, but the laptop still says: I am not connected.

  I tried a lot of things. New drivers, uninstaller and reinstall, Hard reset and many other suggestions I found on the internet without success.

  I hope that someone out there has seen this particular problem.

  Thank you

  Hello Rick,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted network driver or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Convenience store network in Windows 7 provides a way for anyone diagnose and fix network problems. The problem may be caused by a number of problems with your computer, the web server or the network between your computer and the web server.

  If this does not help, use method 2.

  Method 2:
  Reset TCP/IP and check the issue.
  Refer to this article:
  How to reset TCP/IP using the NetShell utility
  https://support.Microsoft.com/en-us/KB/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• my language has changed between English and symbols, and I do not know how to change back

  my language has changed between English and symbols, and I do not know how to change back

  Hello Joe Barton,

  Have you tried to change the display language, from the link above?  Alternatively, you can try to perform a system restore, if it happened recently.  Did you do a full scan with your antivirus software and ran all the malware removal?

  Please let us know status.

• DV6 - 2173cl: what the drivers of network adapter for LAN and WiFi for HP dv6 - 2173cl

  Hello

  I have reinstall my drivers for the computer hp laptop dv6 - 2173cl.  This laptop has LAN and WiFi cards.  I looked at the driver for this model and I see that for drivers WIFI HP has:
  Available drivers Atheros and Broadcom.

  I let Windows Update and it installed an Intel WiFi Link driver which is not yet on the Internet HP site.  I have

  Do I need to install Atheros or Boardcom WiFi driver for this model?    I'm afraid that, perhaps, the Intel driver is a generic driver that makes the card works but is not optimizing his performance as do dedicated pilots.

  How do I know what brand for the wifi card I have?

  Thank you

  You are the very welcome.

  You need the JMicron card reader driver for your model.

  You don't need the driver of Intel Matrix Storage manager.

  The Intel matrix storage driver manager is used for disk raid configurations.

  I couldn't find a W7 driver for your Intel card.  The site is down or they can't stand any more of the map.

  It states right they do not provide phone, chat or emal support for this card.

  So here is the latest driver I could find at HP.

  If it is newer that what update of windows installed, then you can install it.

  15.0 (February 14, 2012)

  FTP://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56162.exe

• At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  original title: server and virus problem

  Hi SurajMendon,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.

  Networking platform

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Possible to use Lan and Wifi laptop computer with VMWare?

  I have a laptop Dell D630 running Windows 7 as the host operating system.  Normally if you use wifi and you plug a cable lan wifi disconnects because the laptop uses the connection with higher bandwidth.

  Is it possible to have the laptop direct is the entrance the guest operating system on lan and wifi running for the host operating system?  In this scenario, the guest operating system could have total control on the lan input and it would not need to be accessible by the host operating system.

  Thank you!

  I have no problem to use Ethernet and WiFi adapters at the same time on any of my notebooks including Dell.

  If you want to isolate virtual machines to be filled to the Ethernet adapter on the host computer and do not have the host use simultaneously then proceed as follows:

  In the value the target adapter VMnet0 virtual network Editor.

  Then on the dialog box properties of the adapter to the target on the host computer uncheck everything except VMware Bridge Protocol.

  Now with the guest on Bridged they connect to the physical LAN while the host will be able to use the WiFi adapter to communicate with the physical LAN.

• Every Pc has yellow ball on the NIC (LAN and WIFI)

  All client computers obtained yellow ball in the NIC (LAN and Wifi) after running GPUPDATE/force on domain controller.

  I've run the gpupdate and all afftected users once again, also
  account has been removed from the ACL of the directory.

  I am the admin of our small network and have never needed to play with the
  GPO before. This problem just happened 'out of the blue"and I would like to
  to resolve what caused it.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Resolution of screen changes back back when switch between Yosemite and Fusion 7

  Upgrade to Yosemite on my MacBook Pro has forced me to also upgrade to Fusion 5, who had been very stable and problem free. Unfortunately, I knew a behavior very boring to the resolution of the screen in my virtual session of Windows 7, when I toggle between Yosemite and the virtual partition of Windows 7. Any time that make a screen resolution change and change over on the side of Yosemite, when I return to Windows 7, the resolution returns to the default setting of 2880 X 1800, which requires a magnifying glass to see! Does anyone else know this? I couldn't find a thread discussing this problem, but I know that yosemite is new.

  In addition, since it is clearly a bug, can someone tell me the best way to report it to VMWare? I'm sure they want to know about the bugs, but I don't know the best way to report them. They were very helpful when I discovered how hard this upgrade to Yosemite before checking to see Fusion 5 was consistent (if not) was a mistake on my part - they got me on track, and even if it's a bear to learn how to get a live person on the line with VMWare site Once I did, I finally got a guy who nailed - Kudos to their technical support for this team.

  Glenn

  Hello Glenn

  Try to disable the support of the retina by going to

  1. Virtual Machine menu > settings > display. Uncheck the use full resolution over Retina display.

• Firefox randomly changes between fullscreen and windowed mode

  While I use Firefox mode window it will change randomly a fashion advertising full screen, it will change between these modes constantly. I tried to reset Firefox, but this has not solved the problem.
  The only way I managed to keep it from constantly change is by going in the Task Manager with ctrl + alt + delete.

  Do the same with other browsers?

  Now after looking around a bit, I think I've found some information. If you are experiencing a different problem from that let me know.
  Try this link. https://support.Mozilla.org/en-us/Que.../913975

• Excel freeze when changing cell color and HP LaserJet CM1415fn is default printer

  We use a HP LaserJet CM1415fn connected via Ethernet. The computer is running Windows 7 x 64 with the latest printer drivers available on the HP Web site as of today.

  When this printer is the default printer, there's a freeze occurring in Excel when we try to change the color of a cell, exactly as described here:

  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-Excel/changing-font-color-causes-Excel-t...

  and here:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-Excel/Excel-not-responding-when-changing...

  Both messages suggested that set the default printer to something else solves the problem and that the problem lies in the driver printer, and indeed, the default printer to something other that our HP printer makes this problem disappear immediately.

  Could you please provide an updated driver or a workaround another that set the default printer to something else?

  To after what I read this peut be bound by printer drivers, but I doubt that the problem is caused by the printer driver. They do refer to is an editor of document to their default the Printers folder, which I do not have is - not - a printer driver. The XPS Document Writer 'prints' documents in a file, it is not really a printer driver at all and it's more a misnomer to consider it as such.

  The description of the problem, it seems always be attached to the Software Suite. If it is a problem that the effects of several printer drivers (according to the user), it wouldn't make sense to assume that the problem is the drivers for the printers belonging to users who have this problem, but the common factor uniting the experiences here, that would be the desktop software.

  What you can do is check the following link to ensure that A) all updates are applied correctly B) driver software is updated through uninstall/reinstall and (C) you ensure that the printer firmware is up to date:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4089468

  It is possible, it's a hangup in the software, but if things internally within the program that it would not make sense of how the printer HP programming works.

  I would like to know how it goes!

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• Reset the workspace when switching between laptop and external monitor

  Is there a way to have my work space reset itself (or better yet change between two workspaces) when I pass between my laptop and my external monitor to my office. Adobe likes to crush my workspace in a sea of useless, mutilated pallets when I leave my office. There at least had the kindness to put it when I get back.

  I realize I can manually reset and I even put in place a combination of keys, but I don't see why he can't do it on its own. Or better yet, stop blend it upward in the first place.

  Unfortunately, I think it's an OS and PS reacts only to have to resize it to another monitor.

• The CMYK values change between FH and Photoshop

  Hello
  
  I'm recreating a logo in FreeHand MX11 of a fact in Photoshop CS2, which is composed of PMS colors. Unfortunately, the original artist didn't leave notes about what PMS colors she used, but when I sample a color in P'shop, I get a PMS color (286 PC C100/M66/Y0/K2) it's a close match. Problem is when I assign that same color in FreeHand, even if the color has the same CMYK values, it looks much darker and not of the same color at all. When I copy and paste the image of FH in Photoshop and sample it, its values change to C100, M86, Y23, K9.
  
  I'm confused, how the two applications can have so much variation in the PMS color display? Y at - he adjustment of color management that I need trouble?
  
  Thanks for any help,
  Chris

  Christopher Christner says:

  > [...] but when I sample a color in P'shop, I get a PMS color that has a close
  > match. Problem is when I assign that same color in FreeHand, it looks great
  > darker and not the same color at all.

  What are your color management settings is FH? Are you on a PC or a Mac? Are
  using ColorSync?

  Take a look at color settings of Danny Whitehead to see a success
  the colors between Photoshop and FH management approach.

  http://www.bqprint.co.UK/otherstuff/cmsettingsosx.jpg

  Judy Arndt

• How to make the computer to look for SBRIO on a LAN connection when wireless connections LAN and are active

  Hello

  I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?

  Thank you

  Mouda.

  You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC

• Windows 7 does not connect to the new wifi networks

  I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.

  Can someone help me?

  Hello James,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur for the following reasons:

  -WEP, WPA or WPA2 key or password security issues.
  -Incorrect network connection settings.
  -Corrupt or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Why the relative values of RGB and CMYK will not change when switching between Photoshop and InDesign?

  I'm trying to put together a Guide to color for my company's brand guidelines.

  Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.

  However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.

  Why is this?

  JamieCurtis5 wrote:

  It makes me feel a bit nervous leaving aside CMYK all together...

  CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).

  That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).

  In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.