Uşaklar and again Atikmpag.sys bsod crash after and after and after
It all started in a Sun and a nice day I turned my G62-b13ST and after some time it crashed and I googled and I saw that the driver Sweeper and downloading might be a solution I thought. After I've deleted and updated the driver, he arrived after and after and this situation atikmpag.sys and finally ended up here im desperate and hopeless.
I tried the solutions in the internet and ask you what to do?
Hi DEVO61,
Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP G62-b13ST and constant crashing. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore.
Here is a link to a Update for the BIOS. If this does not help, try tapping F10 key go to the diagnosis and then run the hard drive & memory test when a test fails, you will need to replace the part. Please also check if the device is more heating.
Please let me know how it goes.
Thank you.
Tags: Notebooks
Similar Questions
-
Satellite L850 - atikmpag.sys BSOD
News of the computer:
Satellite L850-0EF01JAR
(bought in the Kingdom of Saudi Arabia)
pre-installed with Win 7 64 bit home edition Basic, up-to-date online to UltimateQuestion:
-After a LCD problem, bought an external monitor and reformatted computer
-update of the AMD drivers but to atikmpag.sys does not BSOD
-ran DDU and downloaded/installed the drivers from the website toshiba.eu but after reboot, same problem
-DDU is represented, reinstalled the driver only (without centre of AMD catalyst) but same problem after reboot
-use the Toshiba Recovery settings but after he installed the display driver, it gives bsod
-employee Toshiba recover to wipe the HD, ran the recovery, but had the same problem
-now, I've used toshiba recover to annihilate HD, reinstall windows, install the toshiba display driver, has not restarted the pc, downloaded the drivers omega 14.12 AMD amd, extracted, copied atikmpag.sy_ and has developed, where atikmpag.sys copied and pasted on system32/drivers with the former being renamed to atikmpag.sys.old. (file size difference is large enough; old atikmpag is 350 KB, the news was 500 + kb)
-restarted the pc and it started
-Check the Device Manager, it shows yellow exclamation on amd point and driver details shows atikmpag.sys is not digitally signed
-start on win pc options, advanced disabled driver signature backup and I got BSOD...
-check the forums as well as a post said on a kb3004934 of victory was updated, but I have not just on my own...so, what is next?
Hello
I can't find exact laptop specifications and don t know what version of Win7 you have with your machine, but I can't imagine that you have such problems after the original recovery image installation.
Original recovery image contains drivers tested for your machine.Sorry, but I must ask you once more: you may have noticed this problem even if you have installed the original recovery image that you got with your machine?
-
Blue screen error with atikmpag.sys in Windows 7
* original title - various tasks, screen freezes, the driver unloads video (default 100% speed GPU fan), then atikmpag.sys BSOD - 3 months of pain
Well, this is going to be long and stretched, so I will start with my sincere apologies.
Description of the problem:
I rebuilt my entire machine a few months previously, after purchasing a TechNet Plus subscription new video card ATI Radeon 5870 2 GB and new AMD PhenomII X 4 965 CPU. Quickly, I installed Windows 7 Ultimate x 64 and started to load all the drivers and applications. Then the problems started. I want to play WoW would freeze the game, the screen would be gray, then black, then the fan on the video card could turn 100% gas (video driver Windows in vacuum), then about 60 to 90 seconds later, I'd get a BSOD with either atikmdag.sys or lately, it's been atikmpag.sys. This happens also in looking at video clips in Windows Media Player or VLC and sometimes even when I watch YouTube videos (both in IE or Firefox).System Specs:
ASUS Crosshair II Formula motherboard
Processor AMD PhenomII X 4 965
Patriot 4 GB RAM
Sapphire ATI Radeon 5870 2 GB
AHCI controlled hard discs and CD
Windows 7 Ultimate x 64 (Technet)Resolution attempts:
1 reinstalled Windows 7
2. reinstalled Windows 7
3. has taken the store of the local computer system and received a replacement of the stock video card
4 reinstalled Windows 7
(while reinstalling Windows, tried to use the drivers ATI Catalyst 9.12 (from original CD) version, 10.1, 10.2, 10.3, 10.4 and finally 10.5 installed on 2010-03-06)
5 has tried to change ATI Performance profile XML
CoreClockTarget and MemoryClockTarget to Want_0 and Want_1 to be superior to
by default, if the map wouldn't increase the speed as well (recommended by ATI
Forums)
* a began to arrive like clockwork, when I installed RollerCoasterTycoon3, crash guaranteed within 30 minutes from a screenplay, it began 6/1, so the following entries are from this past weekend at today *.
New drivers from ATI, 10.5, installed. No change in behavior.
6 disabled Aero in the Windows (no effect, re-activated)
7 uninstalled catalyst Suite, leaving bare drivers only (current config with version 10.5)
8 tried to use verifier.exe to diagnose the problem, the system would be only BSOD when booting, soon in the splash screen, then restart
9. attempt to repair window, unable to find a solution, no change, restart
10 Mode safe boot to run verifier.exe and remove current running values
11 restart Windows normally
12 called Support Microsoft (available upon request by MP number) 07/06/2010Controlled Microsoft Support Technician my computer for a few minutes and I showed him the minidump file use dumpchk.exe, but he said it seems to be just a video card driver problem. I have very very hard to believe that after 3 re - moved and 5 different versions of the drivers. I will try to contact the ATI support tomorrow. I thought that someone on this site might be able to help me to the analysis of minidumps and eventually find the real cause of this issue. I download DxDiag.txt exit, minidumps and the full memory.dmp file (compressed with winrar best setting, but was still divided into two files because of the restriction of 50 MB) to my folder public skydrive, link below:
http://CID-44caa82b00d80af9.Office.live.com/Browse.aspx/publicIf there are things that I left out, or questions, please ask and I will answer as fast as I can. I really want to fix this, so I won't have to format and upgrade to a different operating system.
James Kerr
Hi James Kerr.
Please see the post below with a similar problem and fix possible:
Also, please see the following site AMD forums post:
http://forums.AMD.com/game/messageview.cfm?CATID=260&ThreadId=104677
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Satellite L70-B-12 t - BSOD, atikmpag.sys everything at stake
Whenever I try to play a game amd driver crashes or I get bsoded (atikmpag.sys).
Some days he arrives just after I start the laptop and other computer after several hours of use or one or two hours of play.I tried everything on x 64 (OEM) home win8 and win 7 pro x 64.
All included:
-Updated graphics drivers Intel (auto-updater invited me to use toshibas pilot)
-Used Toshibas drivers.
-Used pilots later and beta AMD.-All Windows and the graphics card settings are on performance.
Disabled - all energy saving relevant options I could find.
-Tried several times, extraction - replace manually, to solve atikmpag bsod without change. I get this error message 1 x per day minimum.
The games I tried, and make the bad are:
-Sniper Elite 3 (driver crashes and recover successfully)
-Archage (each graphic parameter is at least and I keep crashing, bsoding my permit hang right after that I connect to the game)
-Tera: here I can actually log on settings low (+ lotsa .ini tweaking) but I get randomly driver hang of the thing even once and the rare bsod.
And these are the only games I've tried on this laptop so farNormal computer 3DMark test: Bsod when generates the report.
3DMark mid range gaming pc test: driver hangs on the 1st video and never recovers.
Plan to run another Tester stress but also that i'm definatelly of ideas on how to keep this troubleshooting.Thanks in advance!
For me, it looks like a RAM problem as did mistake place in different situations at different times.
So it could be a LITTLE unstable in memory / RAM.
Download memtest86 and let pass the test for a longer period. Most of the problems a RAM / errors will be caught in the 1st run, some on the 2nd or 3rd. -
BSOD in Windows 8 atikmpag.sys
I have problems BSOD mainly focussed on the atikmpag.sys (see the first 3 reports WhoCrashed) and was hoping someone could help out. More recently, I got the BSOD who wakes from sleep. I have four monitors and a number of applications (for example, various office products, several tabs in Chrome), but nothing that the computer should not be able to process (see below). I have read a number of discussions on this issue and that you have not found a solution: it seems that there are many possible causes.Full .dmp file is available at https://www.dropbox.com/s/k10qxgei0x6tr07/MEMORY.zip for the most recent BSOD. All 4 .dmp minidump files are available at https://www.dropbox.com/s/h5yncexruz3q3ha/Minidump%20Files.zip.It is a personalized desktop build.-CPU: i7 - 4770K-MB: ASUS Z87 - Pro-Memory: 2 x 8GB Corsair Vengeance-Storage: Samsung 840 Pro Series 256GB SSD-Video card: ASUS DirectCU II 28nm HD7970-DC2-3GD5 graphics card-Power supply: Corsair AX 850Other relevant information:-Problem seems related to the graphics card. The 7970 has 1 DVI and DisplayPort 3 link / DVI links in total 4 monitors.-No overclocking of any kind.-The pilots I know are up to date (for example, graphics drivers, have not installed the drivers from "non-essential" for example for the wireless network adapter). It is possible that the absence of these drivers 'non-essential' is what causes the problem.-All Windows updates have been installed.-J' did Memtest86 + on each stick of RAM o/n and found no problem.-J' reinstalled OS using reset to Windows 8.-Temperature of the GPU seems OK (~ 55 degrees C), and the fans seem to be working.-J' I just disabled when using Chrome hardware acceleration, as I read somewhere else that it can be problematic.-I have not stressed/benchmarked beyond Memtest86 + but can do going forward.Any help would be much appreciated, thanks!---Friday, June 28, 2013 5:26:11 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\062813-4437-01.dmp
This was probably caused by the following module: atikmpag.sys (atikmpag + 0x480B5)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8800404E0B5, 0xFFFFF880083E8050, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\atikmpag.sys
product: AMD driver
company: Advanced Micro Devices, Inc..
Description: multi-vendor AMD driver miniport
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
Google search: Advanced Micro Devices, Inc. SYSTEM_SERVICE_EXCEPTIONFriday, June 28, 2013 12:47:22 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\062813-5750-01.dmp
This was probably caused by the following module: atikmpag.sys (atikmpag + 0xACF0)
Bug check code: 0 x 116 (0xFFFFFA80103D24D0, 0xFFFFF88003F5FCF0, 0x0, 0xD)
Error: VIDEO_TDR_ERROR
file path: C:\Windows\system32\drivers\atikmpag.sys
product: AMD driver
company: Advanced Micro Devices, Inc..
Description: multi-vendor AMD driver miniport
Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR11:57:07 AM GMT on Saturday, June 15, 2013 crashed your computer
crash dump file: C:\Windows\Minidump\061513-8296-01.dmp
This was probably caused by the following module: atikmpag.sys (atikmpag + 0xACF0)
Bug check code: 0 x 116 (0xFFFFFA800D3AF4D0, 0xFFFFF8800421CCF0, 0x0, 0xD)
Error: VIDEO_TDR_ERROR
file path: C:\Windows\system32\drivers\atikmpag.sys
product: AMD driver
company: Advanced Micro Devices, Inc..
Description: multi-vendor AMD driver miniport
Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERRORFriday, June 14, 2013 2:42:51 AM GMT crashed your computer
crash dump file: C:\Windows\Minidump\061313-5468-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x7B040)
Verification of error code: 0 x 50 (0x0, 0xFFFFF80331E5CE84, 0xFFFFF69000353D38, 0 x 2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that invalid system memory was referenced.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.I tried the update driver ATI Mobility HD 4300/4500 Windows 8.1 from amd.com but returned crashes. The graphics hardware is old (1/2009) then I disabled the driver from AMD and graphics card uses at least fonts but same resolution with the standard graphics driver not one built for the hardware that is causing all the problems.
The flicker of the graphics before the accident, said the card cannot handle the high rate of resolution or refresh in the driver crashing in my opinion. This has been ongoing for about 2 or 3 weeks. It's like the laptop is dying. He is 5 years old.
Try to disable the card manufacturer video driver that is causing problems and live with less fancy accident-free driver from Microsoft.
-
Satellite L650 1LN - BSOD, atikmpag.sys error
Hello
I'm from Italy,
I have a problem with my laptop (operating system, WINDOWS 7).After a while I use the laptop, I get an error: the AMD display driver has stopped working and has been restored.
Shortly after this awful blue screen appears with the error "atikmpag.sys."I tried to restore my laptop, but I still have the same error.
I also tried to install the updated drivers Catalyst, but I install it on my laptop.How can I fix it?
You have a guide to follow step by step?Thank you all! Alex.
Hello
The error message indicates a problem with the chip of the graphics card or graphics card driver.
BSOD may occur if the graphic temperature would be too high, it might lead to chart falls down and BSOD.I think you should follow the advice of s Ilay and should reinstall or update the graphics driver.
The old driver must be removed before you begin the new installation.
In case this does not improve the functionality, I recommend you to perform a complete system recovery.Hope that this would finally solve the problems.
-
BSOD Atikmpag.sys Elitebook 8560w ati m5950
Hi all
I have problems with my Elitebook 8560w. I get the BSOD on startup all the time, when the login screen appears in windows 7. (atikmpag.sys)
I have tried several things but I can't solve it, the laptop cannot start up if I use the standard vga driver.
Things I've tried:
Fresh install Windows 7 x 64, Windows 7 x 86, Windows XP x 64, Windows XP x 86
Tried all versions of BIOS
Tried all versions of drivers for video card, both HP and Ati with fres installs Windows.
It's getting boring, please help me.
Where can I get the latest version of the video Bios for my m5950? Who can solve my problem.
Hello hlaca20. I understand that you have a problem with the blue screens that often occur during startup. Is this correct?
You've tried quite a few steps to solve the problem. I think that the combination of the BIOS update, fresh install multiple operating systems and fresh drivers excluded the majority of software problems. Have you tried to test your equipment?
If you have not deleted the partition of HP_Tools you can use the built-in tools that provides HP. You should test your memory and the hard disk to determine whether there are problems.
This document describes how to run the hard drive test. Simply repeat the steps in selection of memory the second time to test the RAM.
I'm waiting for your answer; have a great day!
-
I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.
Thank you.
This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.
If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
MS - MVP - Elephant Boy computers - don't panic! -
Blue Screen Atikmpag.sys 0 x 116 Win7 Ultimate X 64
Hey all,.
OK, so after a few weeks of troubleshooting and no chance of finding a solution, I thought I'll try to ask someone for help.I get the BSOD atikmpag.sys 0 x 116. It started a week after I installed my ATi video card 7970 replace my 5970 who died. The only problem is that sometimes prob once per day to the maximum, or approximately every 8-12 hours. No matter if I play a game or the computer is sitting idle doing nothing. When he wants it just crash it.The system ran without a hiccup since 18-19 months so far. Here is my cardASUS P7P55D-E Premium MotherboardIntel i7 870 OC @ 4 GHzITS ATi 7970Thermaltake Toughpower XT 875w PSU8GB Kingston HyperX DDR3 (KHX2000C9AD3T1K2/4GX)1 HARD WD Green of TB driveSB Fatality Pro Sound CardBR Samsung driveHere's what I tried to do so far to solve the problemDrivers - Cleansweep. Tried to use CCC 12.3 and 12.4 (no other don't support my card) has also tried the drivers from the manufacturer's CD-Ran Mem test and chkdsk no abnormalities not detected-Replace all the Ram, nothing has changed-Reset all the bios to the factory settings and no change-MB update for the latest version of the Bios-Replace the video card without change. (Also tested the 7970 in another machine with the same card and no crash no more)-Bought a processor intel SSD 520 series 120 GB and installed a new copy of windows. (12 hours later I installed Skype and got the blue screen during the installation. Ran it again all right)Because of the time between BSOD, it has been difficult to quickly diagnose what worked and what did not. If it isn't a major issue in most cases, since I still have the function of pc for most of the time, it would be nice if it didn't happen at all.Really, I guess I'm down to replace the motherboard as a final solution that I really don't want to do this now because I don't have a spare part which means I have to go buy a new one and always have the risk that it cannot be the issue. The only other thing I can think is that it is just driver related and I have to wait and hope that maybe ATi next version fix the issue of CCCSomeone at - it ideas?Thank youDominikHey TorrentG,
After this first dump file, I had updated all my drivers on a new install of win7PCTools was my anti-virus software. I only installed the drivers for all my devices and no extra software on my new install of windows and it was still giving me the BSOD.After replacing almost all of my material, I was always getting the same question.Tried the beta version of 12.6 and not a crash since. Machine worked 24/7 for 12 days per incident.Thanks for taking a peek anyway.DOM -
Tecra R840 - atikmpag.sys causes bluescreen
Hello
displaying videos on my Tecra R840 sometimes I get a blue screen with the atikmpag.sys driver.
Happens to every time, but often - about one in four times or more.
The blue screen occurs especially at the beginning of the video - but sometimes also in the end.
In the download for my Tecra area, there is only one pilot display of 2012 - I have installed.
I have Windows 7 64 bit, 8 GB of RAM and the AMD Radeon HD 6450 M.
Does anyone have a tip for me?
Thank you very much in advance
Anne
Hello
Because this problem does not always, but sometimes, it would be very difficult to reproduce this BSOD and therefore, it is not very easy to say why the BSOD appears.
Is that file atikmpag.sys belongs to the graphics card driver.
It seems that the graphics card driver crashes, and therefore the BSOD occurs.
But why?I have two different theories:
(1) the graphics driver is not fully compatible with the new software installed, tools (games), etc., but the fact is that the Toshiba driver page does not provide all new GPU drivers for this model of laptop. The other point is that the same driver version worked correctly in the past and I m wondering why the same driver should not operate correctly now if it worked correctly in the past.(2) my 2nd theory is that the BSOD appears due to the higher temperature of the internal GPU. The highest temperature is mainly a reason for blockages of the system and also responsible for issues of the graphics card.
Have you tried to reinstall/recover the system? Isn't it?
I would recommend you do this using the Toshiba recovery disc. This procedure should always be made in the event of system problems.I also recommend you to clean the modules of cooling using a jet of compressed air. That would help you get rid of the dust. Dust is mainly a reason if it comes to a temperature higher inside the laptop.
-
atikmpag.sys blue screen
Hello there, so I got this blue screen atikmpag.sys appers in my laptop, I have if I could fix it with an OD format I tried that now, not only there has not been fixed but I cannot run in safe mode because windows have so install, no way to get rid of the blue screen? my laptop is G62-b90EV,
Thanks in advanceI fixed it before you post, I just went C:windows/drivers/atikmpag.sys and just delete the file, I reboot and the bsod appeared, then I download just last Ati graphics driver and everything is fine now.
Anyway thanks for your help!
-
Black screen after start - "Video_tdr_failure atikmpag.sys.
Original title: black screen after startup
A few days ago I accidentally dropped my laptop I was trying to pick it up. It froze and I used the power button to stop it. The next day, it worked very well, I played a game, but then the screen got all blurry and it froze again. Therefore, whenever I started it normally, I would get a blank screen. But in Safe Mode, it worked fine.
I assumed it was my hard drive, I got a new and it seemed to work very well, I had reinstalled W7. Until I tried to install the updates and it the screen went white again. I used the system restore and got it to do work. Then decided to move to W10.
After the upgrade, the pc restarted with a white screen, I have it connected to the TV with an hdmi cable while you try to start it, then the screen worked fine. He stayed very well until I tried to install the updates. It would not just start up. He gave to the page «Video_tdr_failure atikmpag.sys»
I returned to Windows 7 and now it always starts with a blank screen.
* the screen works very well throughout the boot process
And works fine in Safe Mode *.
Chances are, at least (if not more) there is now a default in the video circuits.
Be aware, the laptops are very delicate animals. This type of accident will most often mean end of system life. The biggest problem is the cost of the repairs in such a situation. The pieces are almost all owners - read overvalued. Repairs made by technicians who are not deeply experienced in the setting of your particular brand/model are often insufficiently. Which leads you onto the OEM repair service that is overvalued.
The result is that once a laptop is spent on the brand of 3 years, repair of such a system in such circumstances: the replacement more often.
Well consider a desktop computer type for a replacement. They are cheaper to begin with, usually more powerful - sometimes by a factor of 2, are easily repairable using components of off - the shelf that are commonly available and one made by several competitors. Desktop computers usually hold up well almost two times longer. From an ergonomic point of view, laptops are considered experts machines of 20 minutes. Use of meaning beyond that time can be bad for your health.
-
Having intermittent BSOD crash
Having intermittent BSOD crash.
Hello community, I had intermittent crash or BSOD problems for about six months now.
I know: cannot reproduce the crash at will. Seems to be intermittent without real reason. System can work several hours or even days without any problem. Then I can have several accidents within minutes of each other. I installed Windows office in 2013, the situation went from bad to worse, extremely. Of course, I ran system restore to get rid of this problem.
Efforts in case of problem: I ran mem 86 tests overnight, (note I have 64-bit system then of course to test everything I was with 64-bit programs). I tried stress tests CPU, with testers of Intel. I removed my FI creative sound card and went with the on-board audio device. I started from scratch with a new install of Win 7 Ultimate OS, not only an upgrade. I have a great cooling and have checked system time, fans, power output etc. Does not overheat as I can see. Device Manager is clean and not yellow bangs or ratings. None of the above test produced errors.
System Stats:
Name of the operating system Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Another Description of 64-bit operating system
Manufacturer of operating system Microsoft Corporation
Name of the system
System manufacturer Gigabyte Technology Co., Ltd.
X58A-UD3R system model
System Type x 64-based PC
Processor Intel Core i7 950 @ 3.07 GHz 3060 Mhz, 4 Lossnay, 8 logical processors
BIOS Version/Date award Software International, Inc. FF, 18/02/2011
SMBIOS Version 2.4
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.1.7601.17514".
Username
The Rocky area times time
Physical memory (RAM) installed 6,00 GB
6,00 GB total physical memory
4.11 GB available physical memory
12.0 GB total virtual memory
9.91 GB available virtual memory
Page file space 6,00 GB
Paging file C:\pagefile.sys
Most of the mini dump errors is associated with ntoskrnl.exe
==================================================
Dump file: 112913-26379 - 01.dmp
Crash time: 29/11/2013-21:31:54
Bug Check String:
Bug check code: 0 x 00000101
Parameter 1: 00000000'00000019
Parameter 2: 00000000'00000000
Parameter 3: fffff880'03313180
Parameter 4: 00000000'00000006
Caused by the pilot: volmgr.sys
Caused by the address: volmgr.sys + 14d0
Description of the file: the Volume Manager driver
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
CPU: x 64
Plant address: ntoskrnl.exe + 75bc0
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\MiniDump\112913-26379-01.dmp
Number of processors: 8
Main version: 15
Minor Version: 7601
Size of the dump file: 291 032
Dump of file time: 29/11/2013-21:33:41
==================================================
Please let me know what other information you need to help me solve this problem.
Thank you.Are you sure you have the correct and up-to-date chipset drivers? Do you run VM and if if you have noticed a relationship between them and the system crashes? I can't think of it as anything other than a driver problem. The only reason why VM I'm raising is that some parameters may cause blockages of the seemingly random system especially when it comes to virtualization settings from intel or activate USB 3.0 in a virtual environment.
-
I recently bought a Lenove Ideapad 500 with i5 and AMD Radeon graphics however when used it crashes and I get a failure Kernal to check the safety and the laptop stops and does not restart. After leaving there a few hours if restarts until it does some time later...
Mod edit: System model added to the front of the subject line to improve visibility / clarity.
Hi, I tried return from pilots who do not solve anything, he became almost unusable crashing after seconds with various errors that appear. Even after the laptop asked me to do a repair of Windows. I tried and it crashed again. Finally, I called the catalog that I bought through returned, they sent a replacement and it seems to be ok, I wonder if something was wrong with the other from the beginning. The news is faster and there are more steps to be implemented, although it is the same as that!
-
Hello
so I have a big problem with my y560 (i3, switchable graphics). Every time when I try to run a game (any game), I got a blue screen, which is caused by the file atikmpag.sys. I have the latest video drivers and BIOS of the Lenovo site, I run reference and check the temperature of graphics cards, it is high but the laptop works very well. Is it possible to hardware problem or should I wait for new drivers of Lenovo and see if they can help?
According to this thread, solution ships your laptop to support from lenovo for the replacement of the main map.
What version of the graphics drivers are you using by the way?
Maybe you need to update drivers ati.com directly.
Maybe you are looking for
-
Satellite Pro U200: I want to improve memory up to 2 GB
Hello I want to improve the memory to 2 GB in this notebook. Did someone or know how to find some manuals (with photos) on this subject. ? Thanks in advanceTomasz
-
Hello...I have a satiellite pro spm30 model, it took sirvice Center because the machein becomes Veery hot & I do not taken cooling fan at all, when I connect to the net computer frezs if I open multiple pages and he returned after a protest and conti
-
I am using Imesh version 12 for download music on my laptop... Revieved just an error message saying Imesh can not work properly as some of the files are corrupted... It does not allow me to log in... What can I do to save all my music already do
-
Hello. I was wondering if someone could help understand me the type of memory a DV7 7201ea. Looking to get a replacement screen and have two different products to choose from depending on the type of memory graphics. Problem is that I have no idea ho
-
How to move Windows program from Windows.old files after you do a re-installation of my Vista Home Premium? Can I move the program files or do I have to reinstall each program with the cd that came with the applicable programs? I know how to move all