Windows creating duplicates that absorb CPU

Similar Questions

• The wizard of the driver NI-VISA creates drivers that are compatible with the 64-bit Windows XP/Vista version?

  The wizard of the NI-VISA driver creates drivers that are compatible with 64-bit Windows XP/Vista?

  InfiniteNothing-

  If you use a 64-bit compatible version of the NI-VISA driver, then the Assistant of the Driver NI-VISA is expected to create device drivers compatible 64-bit running in 32-bit mode.  You can find the various drivers of NI-VISA at http://joule.ni.com/nidu/cds/fn/p/sn/n23:1640/lang/en.

  Take care!

• My Adobe Acrobat widget does not work. Whenever I try to convert a webpage to PDF, a window opens saying that "any version of Acrobat can be found, install Acrobat 11.0.09 or update version to use the extension create PDFs.» I downloaded the last drunk ve

  My Adobe Acrobat widget does not work. Whenever I try to convert a webpage to PDF, a window opens saying that "any version of Acrobat can be found, install Acrobat 11.0.09 or update version to use the extension create PDFs.» I downloaded the latest version but iut still does not work. I use a MAC and Chrome as a browser.

  Can you help me?

  If you use Adobe Reader, you will not be able to create a PDF file. Adobe Reader cannot create a PDF file, modify/edit the content of a PDF page or export the contents of a PDF page.

  For those, you must use Acrobat or one of Adobe's online subscription services.

  Be well...

• No matter what file/program I open and work will appear later in the trash & Windows create a lot of restore points.

  Original title: Windows XP: recycle bin and estore points.

  After the last formatting the computer and installation of Windows XP:
  (1) any file/program I opened and work with / appears later in the trash even if I did not remove it. The file or the program remains in its original folder and nothing happens to her, I can work with him when I want.
  (2) Windows creates so many "restore points" that once a month I have to delete "all except the last" in order to have my program anti-virus (PC-Tools) are working properly.  Is there a cure for this?
  Thanks in advance,
  Yael

  You did the right thing by turning SR off on your external drive.  See http://bertk.mvps.org/html/tips.html#11

  There is no need to have the system restore check a partition which contains only data files.  Http://bertk.mvps.org/html/description.html (this is emphasis added)

  About the system restore

  • System Restore monitors changes to the system and saves the State of the system as a restore point. If a system problem occurs following a change of system, the user can return the system to a previous state by using a restore point data.
    Applications and the system can create restore points when changes made to the system occur. System Restore also creates checkpoints every 24 hours of absolute time. In addition, users can create manual restore at all time points.
  • System Restore does not restore user data or documents, so it will not cause users to lose their files, email, browsing history or Favorites. System Restore is also provided to users in safe mode, making it easier for them to reclaim their computers before that happens the problems. Note: a system of Safe Mode or restore the command prompt a cancellation restore point will NOT created!

  The monitoring system

  • System Restore monitors and restores a set of file system and application, the States of these files before the change of the archiving system. System Restore also records a snapshot of the registry (Note: some current registry values will persist) and some dynamic system files. When the System Restore detects that the user is not actively using the computer, (idle time) he compresses the registry and copies of any file made.
  • System Restore requires a minimum of 200 MB of free disk space on the system drive during the installation. When the amount of falls of free space on the disc below 50 MB on ANY monitored drive, System Restore goes into sleep mode and continues to create restore points. All restore points are deleted at that time. System Restore reactivates and resumes create restore points from 200 MB of free disk space on the system drive.
  • Files that are monitored or excluded from the monitoring are specified in the file % windir%\system32\restore\Filelist.xml. For more information, see Monitoring of file Extensions.

• Windows Update indicates that there are no more updates when there is a lot more updates needed to be updated

  I recently restored my Vista PC for copy of factory and re-applied Windows updates. I can not connect to wireless internet and discovered that it's thanks to put corrupt up-to-date Windows.  I have 1 installed SP and Windows Update says there is no more updates to be applied.  But I want to get SP 2 applies, so I can move to Internet Explorer 9.  How can I continue with the rest of the Windows updates?  Do I just have the SP 2 from the Windows Update Catalog directly?  Will there be other necessary updates before the Vista SP2?   Before this Windows Update repeatedly appy SP 1 even want me it was properly installed.  I had to hide this update SP 1 to pass.

  Two copies:
  Windows Vista update problem, continue, after running sfc, the paper shows the corruption of the file system

  I'm new to this community and accidentally marked this problem have responded. The truth is that it is not. I'm sorry that I have to create a new question. The original question is: ' Windows Update indicates that this PC is up-to-date, but actually much more KB (including SP2) had to be installed "."

  Hi Nathalie,.

  I followed your instructions and made the file (sfc scan) system in the method. The result is

  Windows resource protection found corrupt files but was unable to solve some of them. I select all the records of SR in the cbs.log newspaper and place the records in a text file. There are several check and 0 repair but it did not specify any file name. Now I don't know how to continue. This is not what I expected. I ran Checksur.exe, which was very good.

  How can I know what system files are corrupt and do the repair? Thank you.

  Hello

  What is the size of the Service pack 1 installed on the computer in the history of Windows?

  I suggest you perform the clean boot, download and install Windows Vista service pack 1 from the following link:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Download link: Windows Vista Service Pack 1 five language standalone (KB936330)
  http://www.Microsoft.com/en-in/Download/details.aspx?ID=30

  We answer with the result once you try the steps above.

• I have an error message whenever I get online - "C:\Windows\SYSTEM32\cmd.exe__The NTVDM CPU"

  Original title: NTVDM CPU C:\Windows\SYSTEM32\cmd.exe__The

  I get this error whenever I get online, I've switched so I can't download anything really great, unless it's an offline Installer, can I download another computer.

  C:\Windows\SYSTEM32\cmd.exe
  NTVDM CPU has encountered an invalid statement.
  CS:1214 IP:011 d OP:2e63 20 6 d 6f choose 'Close' to end the application.

  I have no idea what that means or what he's trying to tell me, all that I know is I think it has something to do with my command prompt... and that's the extent of my knowledge. Hopefully I can help to solve this.

  Try restarting. Often, he corrects the NTVDM errors.
   
  --
  ..
  --
  "Xemas" wrote in message news: 61bbbc96-ba62-46a7-9ed2-cb4fb30b274e...
  > I get this error whenever I get online, I only have dial-up so I
  > cannot download anything really big unless it's an offline Installer.
  > can I download another computer.
  >
  > C:\Windows\SYSTEM32\cmd.exe
  > The NTVDM CPU has encountered an invalid statement.
  > CS:1214 IP:011 d 6f 6 d 20 OP:2e63 choose 'Close' put end to the
  > application.
  >
  > I have no idea what it means or is he trying to tell me, as far as I know
  > I think it has something to do with my command prompt... and who has the
  > expand my knowledge. Hopefully I can help to solve this.
  >
   
   

• Continuous Windows\system32\wuauclt.exe pop up __16 bit subsystem MS-DOS error message: C:\Windows\system32\wuauclt.exe__The NTVDM CPU has encountered an invalid statement.

  have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.

  When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.

  I ran scans on my computer but nothing was found.

  Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.

  I also had problems downloading the file exe running for installation on my computer since...

  Microsoft support directed me to this forum for help. Can anyone help?

  Hi Hibernatus,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to start Windows update? You receive an error message?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  The question Windows Update make sure that services associated with the update of Windows running on the computer.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Services window, double-click in the Background Intelligent Transfer Service.

  (d) under the tab general , under Startup type, click Manual, and then click apply.

  (e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the Services window, double-click the Windows Update service.

  (g) under the tab general , next to Startup type, make sure that Automatic is selected.

  (h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (i) in the Services window, double-click Cryptographic service.

  (j) under the tab general , next to Startup type, make sure that Automatic is selected.

  (k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (l) to close the Services window and try again to install updates to Windows.

  Also see the Microsoft article below if you use the Windows XP operating system.

  "16-bit MS-DOS subsystem" error message when you install a program

  http://support.Microsoft.com/kb/314452

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  http://support.Microsoft.com/kb/324767

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows says that my copy is authentic, but update Windows 10 says that it is not

  I built my PC myself four years ago and have not had any problems with the copy of Windows 7 Pro that I bought, until I started trying to pass to Windows 10 free. The update of Windows 10 says that I need to activate my copy of Windows 7.

  However, when I right click on computer and click Properties, it says "Windows is activated." I was wondering if the copy I bought was not official, so I downloaded the Microsoft Genuine Advantage diagnostic tool. He also says that my copy is genuine.

  What can I do to solve this problem, or I can get a new key of Windows 7 and can reactivate somehow my copy of Windows 7 Pro? Thank you.

  According to your report, it is allowed. Try to upgrade manually:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  To learn more:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

  try to upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

  How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

  Jackin salvation,

  Welcome to the Microsoft Answers community.

  When resizing of volumes in Windows7, you must be aware of the following criteria:

  • Only you have the possibility to reduce or enlarge NTFS or RAW (unformatted) partition using Windows 7 tools.
  • When you shrink a partition, files not movable as a page file or a shadow storage area are not resettled. This is why you cannot reduce the size of the Windows beyond volume where these types of files. If you need to reduce the volume, you will need to remove, move or delete the page file or the shadow first storage area, and then reduce the volume and then add the page file or shadow storage on the disk area.
  • If enough bad clusters are found on the disk partition will not shrink.
  • You must be logged on to an administrator account in order to resize Windows Volumes in windows 7.
  
   

  Windows 7 Partitions or Volumes of shrinkage

  This section shows must shrink a Windows volume or partition. To do this, we must open the Windows 7 disk management tool. The following steps will guide you in this process.

  1. Click the button on the Start Menu in the bottom left of your desktop , and then click the Control Panel menu option.

  2. When Control Panel opens, click on system and Maintenance category.

  3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

  4. Double-click the computer management icon. The console of the computer management will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

     
  5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'm going to resize the partition E: of 16 GB so that when completed, there is a 8 GB partition and provides another 8 GB of free space I can use for other purposes.

     
  6. To shrink the partition, just click with the right button on the partition that you want to work with and select reduce . In this example, I click right on the E: partition and in the menu that appears, I select shrink.

  7. A screen similar to the one below appears. This screen indicates the size of the current partition you, how you can reduce it to a field where you can enter a specific amount to reduce, and then how big partition will be once it shrinks. By windows 7 default enters the maximum amount that you can reduce the volume, but if you want to change this amount, do so by entering the amount in MB in the enter the amount of space to shrink in MB: field. When you are satisfied with how windows 7 will shrink the partition, click the minimize button.

     
  8. Once windows 7 is complete decreases the volume, you will be in the disk management screen, but now the partition size will be the size you requested as shown below.
  

  Now that you have reduced the size of your volume of Windows, you can close the computer management console.

  You have now finished reducing your score and you have the extra space available for use as required.

  Windows 7 Partitions or Volumes extension

  This section shows that you must extend a Windows volume. To do this, we must open the tool of disk management where we can resize our volumes. The following steps will guide you in this process.

  1. Click the button on the Start Menu in the bottom left of your desktop, and then click the Control Panel menu option.

  2. When Control Panel opens, click on system and Maintenance category.

  3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

  4. Double-click the computer management icon. The computer management console will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

     
  5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'll extend the E: partition so that it uses the rest of the available space on the disc 1.
     
     
      
  6. To extend the partition, he just click right-click on the partition that you want to work with, and then select the Extend option. In this example, I click right on the E: partition and in the menu that appears, select Extend.

  7. A wizard appears as shown below. Press the Next button to continue.

     
  8. A new screen, shown below, is displayed allowing you to select the free space available on your local hard disks that you can use to extend the space of the selected partition. It is important to note that Windows 7 allows you to extend a volume using free space on the same drive as well as the other disks. I strongly suggest that you do not extend a volume on a disk with free space of the other. It is because if one of the disks has a hardware failure, then all data on this volume will be removed. Rather just to use the free space on a drive that contains the volume you extend
     .

     

     As discussed in step 5, for this tutorial we are going to extend my 8 GB partition (drive E :) to the total size of disk 1 using all the available space. As disk 1 is only available free space on my computer, windows 7 automatically select as shown in the image above and use the maximum amount available to extend the partition. If there were other drives with free space that they have shown during the selection available . If you want to extend the volume to a lower amount you can change in the Select the amount of space in MB: field. In the contrary case, press us the button Next .

  9. You will be now be presented with a confirmation screen. If you are sure you want to extend the volume, press the Finish button. Otherwise, press the back button to make changes or the Cancel button to cancel this operation.

  10. Once Windows 7 completed to extend the volume, you will be on the screen disk management, where you can see the amount that you have extended with the new size. An example of this is shown below.
  

  At this point, you can close the Management window of the computer that your task is completed.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• When I came out of hibernation, a window appears saying that Windows is not genuine

  Windows not genuine message?

  I have a ZT Systems Core i7 PC with Win7 Home Premium 64-bit. It's about a year, but recently, when I came out of hibernation, a window appears saying that Windows is not genuine.  When I close and re - enter my ID in the Properties window, it checks and says that the activation is successful.  Why this message keep appearing from time to time and how do I get rid of him?  Thank you!

  A product id is not a product key. your product key is on your COA attached to your computer. (if your laptop, it may be in the battery compartment).

  MGA Diagnostic Report:

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. (please do not change the report.)

  Please indicate the version and edition of windows from your COA. do not specify the product key from the COA.

  One issue per thread:

  Activation and Validation issues more look the same on the surface, but can have many different causes and bugs. This is why we ask a diagnostic report and it is also why we are asking that you create your own thread for your question (in other words, do not post your question in another thread).

  It is simply too complicated to try to resolve the multiple problems in the same thread.

  How to post in your own thread

  http://answers.Microsoft.com/en-us/page/FAQ#faqGettingAnswers5

• How can I load Windows 8 so that I have the windows 10?

  How can I load Windows 8 so that I have the windows 10?

  Windows 8 is not available, you can get Windows 8.1 now.

  • Official tool to download the ISO of Windows 8.1 installer and create installation media

• How will I know when a PDF doc was created originally that there is nothing under file/properties

  How will I know when a PDF doc was created originally that there is nothing under file/properties

  Hi David,

  Generally, it appears in the document properties window in Acrobat (as illustrated in the following snapshot).

  However, if the sender/author has deleted the pdf metadata then there are chances that original file creation date is not displayed.

  

  Kind regards
  Rahul

• Create jobs that runs a powercli script every day at 20:00

  Hi all

  I'm looking for a way to add a powercli script to cron or schduler so that it runs every day at 20:00 say... I found average windows wrt link below

  http://social.msdn.Microsoft.com/forums/SharePoint/en-us/e63d0776-b4aa-4ab6-885c-a41fd0c83a7c/create-job-that-runs-a-PowerShell-script-every-day?Forum=sharepointgeneralprevious

  Is there better way that this can be done for powercli as well?

  Thank you

  AFAIK, except if you have a few programming specifialised run SW, Windows Scheduler did a good job.

  BTW, Alan has also made a post on this, see running a scheduled task PowerCLI

• Cf11 ColdFusion.Window.Create has no scrollbars

  Cf11 ColdFusion.Window.Create has no scrollbars. I even tried overflow: scroll in the attributes of the tag and cannot operate.

  I'm on a Windows R2 server in 2012.

  < cfajaximport tags = "cfwindow" >

  < TABLE >

  < b >

  " < TD > < img border ="1"src="/Utilities/Images/Icons/folders.ico "onclick =" ColdFusion.Window.create ('Window123', 'Sample window','http://www.blueprintcss.org/tests/parts/sample.html', ) "

  {x: 100, y: 100, height: 500, width: 500, modal: false, liquid: true,}

  Draggable: true, resizable: true, Center: true, initshow:true, refreshOnShow:false,.

  (MinHeight:200, minwidth:50, overflow: scroll}) "/ > < table >

  < /TR >

  < /table >

  Not sure that the Window.create function takes in charge the attributes of overflow.

  Easier work around, I can think about is to use the cfwindow tag and then use the JS to open it. Depends on how the entire page meets in your project.

  To be honest, you will be much better by avoiding the Coldfusion UI functions and using something like jQuery. Much better and easier to handle support.

• creating applications that run on desktop or laptop computers?

  Our small business product guides in PDF format to be used on laptops, tablets and phones. We intend to pass to CC and to use InDesign to convert apps that we think will be much easier for customers to use our guides.

  But we always want to be available for those who use our guides on laptops.

  I know this is a newbie question, but is it possible in InDesign to create applications, similar to those used by iOS and Android devices, which could run on Windows 7 and 8 and the OS X portable computers?

  Transferred to DPS forum.

  8.1 Windows only and that you need a account pro or enterprise.